Institut für Werkstoffkunde, Fügetechnik und Umformtechnik (3030)

Publikationen

Publikationen pro Jahr 1992 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2018 2019 2022 2024

• 743 Artikel
• 611 Beitrag in einem Konferenzband
• 422 (Altdaten) Vortrag oder Präsentation
• 186 Poster
• 354 Mehr
  • 71 Sonstiger Bericht
  • 34 Beitrag in Buch/Bericht
  • 34 Diplomarbeit
  • 33 Buch (Autorenwerk)
  • 31 Bericht für Auftraggeber
  • 28 Abstract
  • 23 Konferenzartikel
  • 19 Paper
  • 18 Dissertation
  • 13 Patent
  • 11 Buch (Herausgeberwerk)
  • 9 Review eines Fachbereichs (Review article)
  • 8 Editorial
  • 7 Masterarbeit
  • 5 Habilitation
  • 3 Bachelorarbeit
  • 2 Vorwort/Nachwort
  • 2 Sonstiger Beitrag
  • 1 Diskussion
  • 1 Short communication
  • 1 Webseite / Webpublikation

Publikationen pro Jahr

Publikationen pro Jahr

Suchergebnisse

• 2024

  Additively Manufactured Polymer-Metal Hybrid Joint

  Marcatto de Oliveira, G. H. & Amancio-Filho, S. T., 8 Feb. 2024.

  Publikation: Konferenzbeitrag › Poster › Begutachtung

  • Joints (Structural Components) 100%
  • Hybrid 100%
  • Polymers 100%
  • Metal 100%
  • Combines 40%
• 2023

  Additively Manufactured Polymer Metal Hybrid Joints

  Marcatto de Oliveira, G. H., 27 Sept. 2023.

  Publikation: Konferenzbeitrag › Poster › Begutachtung

  • Polymers 100%
  • Metal 100%
  • Three Dimensional Printing 100%
  • Joints (Structural Components) 100%
  • Hybrid 100%

• Creep Cavitation in Nickel-Based-Alloys

  Meixner, F., Ahmadi, M. R., Sommitsch, C., Wirth, J., Leissner, T. & Simic, S., 4 Juli 2023.

  Publikation: Konferenzbeitrag › Poster

  Datei

  • Nickel Alloys 100%
  • Creep 100%
  • Temperature 50%
  • Nucleation 50%
  • Tomography 25%

• Fully additive manufacturing of PC/AlSi10Mg hybrid joints with surface structured substrate: a promissing approach for lightweight applications

  Marcatto de Oliveira, G. H., Amancio-Filho, S. T., Sommitsch, C. & Canto, L. B., 11 Mai 2023.

  Publikation: Konferenzbeitrag › Poster › Begutachtung

  • Mechanical Strength 100%
  • Surface Structure 100%
  • Three Dimensional Printing 100%
  • Polycarbonate 100%
  • Lightweight Application 100%

• Investigation of microstructural evolution during hot deformation of micro-alloyed steels

  Bakhtiari, S., Sharifi, S. S., Ilie, S., Poletti, M. C. & Sommitsch, C., Juli 2023.

  Publikation: Konferenzbeitrag › Poster

• The influence of heat treatment and cold deformation on pearlitic steel characteristics

  Sharifi, S. S., Davoodi Jooneghani, H., Six, K., Trummer, G. & Poletti, M. C., 4 Juli 2023.

  Publikation: Konferenzbeitrag › Poster › Begutachtung

  • Microstructure 100%
  • Spring Steel 100%
  • Heat Treatment 100%
  • Strain Rate 66%
  • Ferrite 66%
• 2022

  3D Welding: Additive Fabrication of Structural Steel Elements

  Holzinger, C., Trummer, A., Peters, S., Humer, W., Freytag, B., Funke-Kaiser, D., Enzinger, N., Sharifi, S. S. & Fritsche, S., 2022.

  Publikation: Konferenzbeitrag › Poster

• Computer-aided topology optimization of through-the-thickness reinforcements for metal-composite hybrid joints produced via U-Joining

  Terrazas-Monje, T., Sales de Carvalho, W. & Amancio-Filho, S. T., 2022.

  Publikation: Konferenzbeitrag › Poster

• Dissimilar joints of additive manufactured and wrought aluminium alloy produced by refill friction stir spot welding

  Fritsche, S., Draper, J., Toumpis, A., Galloway, A. & Amancio-Filho, S. T., 22 Apr. 2022.

  Publikation: Konferenzbeitrag › Poster

• High entropy alloys produced by laser powder bed fusion assisted by in-situ alloying

  Arneitz, S., Sharifi, S. S., Palcevski, T., Auer, P., Domitner, J., Poletti, M. C., Amancio-Filho, S. T., Sommitsch, C. & Buzolin, R. H., 22 Apr. 2022.

  Publikation: Konferenzbeitrag › Poster

• Hydrogen absorption during industrial manufacturing of timber screws

  Drexler, A., Vujic, A., Fitzek, H. M., Reischer, E., Scheibenreiter, J., Stiefler, U., Ringhofer, A., Vallant, R. & Domitner, J., 2022.

  Publikation: Konferenzbeitrag › Poster

• INJECTION OVERMOLDED POLYMER-METAL HYBRID STRUCTURES

  Marcatto de Oliveira, G. H., Amancio-Filho, S. T. & Canto, L. B., 22 Apr. 2022.

  Publikation: Konferenzbeitrag › Poster

  Datei

  • Polymers 100%
  • Metal 100%
  • Appliance Energy 25%
  • Metal Insert 25%
  • Molding Cycle 25%

• Laser powder bed fusion of in situ alloyed Ni-rich NiTi shape memory alloy

  Graf, E., Paiotti Marcondes Guimaraes, R., Arneitz, S. & Amancio-Filho, S. T., 22 Apr. 2022.

  Publikation: Konferenzbeitrag › Poster

• Modelling the hot deformation of a microalloyed steel

  Sharifi, S. S., Buzolin, R. H., Melo Gontijo, M., Meixner, F., Hoflehner, C., Poletti, M. C. & Sommitsch, C., 22 Apr. 2022.

  Publikation: Konferenzbeitrag › Poster

  Datei

  • Models 100%
  • Hot Working 100%
  • Microalloyed Steel 100%
  • Mechanisms 66%
  • Strain Hardening 66%

• Optimization of metal-polymer hybrid joints fully produced by Additive Manufacturing using Decision Tree Algorithm

  Belei Feliciano, C. A., Effertz, P., Meier, B. & Amancio-Filho, S. T., 22 Apr. 2022.

  Publikation: Konferenzbeitrag › Poster

• Physical upset butt welding simulation for high performance Q&T steels

  Fritsche, S., Hoflehner, C. & Enzinger, N., 22 Apr. 2022.

  Publikation: Konferenzbeitrag › Poster

• PRODUCTION OF BORON-MODIFIED STAINLESS-STEEL POWDERS FOR LASER POWDER BED FUSION

  J. M. Freitas, B., Amancio-Filho, S. T., Y. Koga, G. & Bolfarini, C., 22 Apr. 2022.

  Publikation: Konferenzbeitrag › Poster

• The effect of an in-situ consolidation process on the microstructure of additive manufactured continuos carbon fiber reinforced polyamide 6 material

  Oberlercher, H., Heim, R., Laux, M., Berndt, A., Amancio-Filho, S. T. & Riemelmoser, F., 22 Apr. 2022.

  Publikation: Konferenzbeitrag › Poster

• Ultrasonic joining parameters optimization and surface corrosion behavior of additively manufactured 316L and PEEK-20CF hybrid structures

  Sales de Carvalho, W., S. Vacchi, G., A.D. Rovere, C. & Amancio-Filho, S. T., 2022.

  Publikation: Konferenzbeitrag › Poster

• Wire-based electron beam additive manufacturing of NiTi shape memory alloy: influence of heat treatment on the functional behaviour

  Paiotti Marcondes Guimaraes, R., Rauchdobler, B., Pixner, F. & Amancio-Filho, S. T., 22 Apr. 2022.

  Publikation: Konferenzbeitrag › Poster
• 2021

  Comparison of numerical models for investigating deep drawing of thin-walled steel cups

  Auer, P., Lohinger, T., Unterrainer, M., Burböck, A., Sommitsch, C. & Domitner, J., 2021.

  Publikation: Konferenzbeitrag › Poster

  Open Access

  Datei

• Effect of stain rate on hot ductility of a Ti-Nb microalloyed steel

  Hoflehner, C., Sommitsch, C., Melo Gontijo, M., Six, J. & Ilie, S., 1 Juni 2021.

  Publikation: Konferenzbeitrag › Poster

  • Reduction 100%
  • Microalloyed Steel 100%
  • Strain Rate 100%
  • Ductility 100%
  • Strain 50%

• Influence of volumetric flow on the mechanical properties of short carbon fiber-reinforced polyamide parts printed by Fused Filament Fabrication

  Belei Feliciano, C. A. & Amancio-Filho, S. T., 2021.

  Publikation: Konferenzbeitrag › Poster

• On the feasibility of Ultrasonic Joining of 3D-printed PEEK to rolled AISI 304 stainless steel reinforced with cold metal transfer welded pins

  de Carvalho, W. S., Enzinger, N. & Amancio-Filho, S. T., 2021.

  Publikation: Konferenzbeitrag › Poster

  • Metal 100%
  • Polyetheretherketone 100%
  • 304 Stainless Steel 100%
  • Poly Ether Ether Ketone 100%
  • Mould Cavity 33%

• Overview of different consolidation models in additive manufacturing of continuous fiber composites their development and initial results

  Oberlercher, H., Berndt, A., Becker, C., Riemelmoser, F. O., Laux, M., Heim, R. & Amancio-Filho, S. T., Sept. 2021.

  Publikation: Konferenzbeitrag › Poster

• Polystyrene microspheres as template for the formation of honeycomb-structured metal sulfide thin films

  Vakalopoulou, E., Rath, T., Warchomicka, F. G. & Trimmel, G., 30 Aug. 2021.

  Publikation: Konferenzbeitrag › Poster › Begutachtung

• Using raw LPBF surfaces to improve the strength of metal-polymer hybrid joints produced by Additive Manufacturing

  Belei Feliciano, C. A., Meier, B. & Amancio-Filho, S. T., Sept. 2021.

  Publikation: Konferenzbeitrag › Poster
• 2020

  Assessment of hydrogen-induced cracking (HIC) susceptibility of V micro-alloyed wire rod steel with different heat treatments

  Elsayed, H., Höllwarth, J., Drexler, A., Galler, M., Sonderegger, B., Vallant, R. & Sommitsch, C., 2020.

  Publikation: Konferenzbeitrag › Poster

  Datei

• Characterization and modelling the flow localization in titanium alloys during hot forming

  Miller Branco Ferraz, F., Poletti, M. C., Wang, P. & Buzolin, R. H., 31 Mai 2020.

  Publikation: Konferenzbeitrag › Poster

  • Characterization 100%
  • Microstructure 100%
  • Titanium Alloys 100%
  • Grain Boundary 75%
  • Dislocation 75%

• Electron beam freeform fabrication of Ni-rich NiTi shape memory alloy

  Guimarães, R. P. M., Mahdi, A., Pixner, F., Trimmel, G., Ramírez, A. J. & Amancio-Filho, S. T., 28 Sept. 2020.

  Publikation: Konferenzbeitrag › Poster

• Evaluation of Quenching and Partitioning C20MnSi Steel microstructure

  Alsharif, A., Ahmed, H. A. E., Galler, M., Vallant, R. & Sommitsch, C., 28 Sept. 2020.

  Publikation: Konferenzbeitrag › Poster

  Datei

• Friction Surfacing as an alternative additive manufacturing technique for titanium alloys

  Amancio-Filho, S. T., Belei Feliciano, C. A. & Fortmüller, S., 28 Sept. 2020.

  Publikation: Konferenzbeitrag › Poster › Begutachtung

• Hydrogen embrittlement (HE) of advanced high-strength steels (AHSS)

  Drexler, A., Elsayed, H., Vallant, R., Domitner, J. & Sommitsch, C., 28 Sept. 2020.

  Publikation: Konferenzbeitrag › Poster

• Influence of bed surface on the mechanical performance of PA6-CF parts printed by FFF

  Belei Feliciano, C. A., Joeressen, J. & Amancio-Filho, S. T., 28 Sept. 2020.

  Publikation: Konferenzbeitrag › Poster

• Investigation the reversion transformation of deformation-induced Martensite

  Sediqui, M. F., Iranshahi, F., Nasiri, M. B. & Enzinger, N., 28 Sept. 2020.

  Publikation: Konferenzbeitrag › Poster

• Microstructural Characterization of Thick Walled Ultra High Strength Steel S1100 Welded in Different Weld Positions

  Tümer, M. & Enzinger, N., 22 Sept. 2020.

  Publikation: Konferenzbeitrag › Poster › Begutachtung

• Microstructure analysis of additive manufactured CF-PA6 parts under consideration of different consolidation parameters

  Oberlercher, H., Heim, R., Amancio-Filho, S. T. & Riemelmoser, F., 28 Sept. 2020.

  Publikation: Konferenzbeitrag › Poster

• Ultrasonic joining of additively manufactured stainless steel 316L and Polyetheretherketone

  de Carvalho, W. S. & Amancio-Filho, S. T., 2020.

  Publikation: Konferenzbeitrag › Poster
• 2019

  4-D Printing of NiTi Shape Memory Alloys

  Paiotti Marcondes Guimaraes, R., Pixner, F., Trimmel, G. & Amancio-Filho, S. T., 26 Sept. 2019.

  Publikation: Konferenzbeitrag › Poster

  Open Access

  Datei

  • Shape Memory Alloy 100%
  • Shape Memory Effect 100%
  • Ingot 20%
  • Memory Effect 20%
  • Complex Shape 20%

• Additive Manufacturing of Metal-Polymer Hybrid Parts: Relevant Aspects and Potential Techniques – A Review

  Belei Feliciano, C. A. & Amancio-Filho, S. T., 5 Nov. 2019.

  Publikation: Konferenzbeitrag › Poster › Begutachtung

• CP-FE modelling and experimental investigation of gradient structured Al wires

  Pourbashiri, M., Poletti, M. C., Sedighi, M. & Sommitsch, C., 26 Sept. 2019.

  Publikation: Konferenzbeitrag › Poster › Begutachtung

• Development and application of an in‐situ method for studying material damage by hydrogen embrittlement

  Massone, A., Manhard, A., Ecker, W., Drexler, A. & Kiener, D., Sept. 2019.

  Publikation: Konferenzbeitrag › Poster

• Friction Riveting – Single-phase Process Variant

  Pina Cipriano, G., Vilaça, P. & Amancio-Filho, S. T., 2019.

  Publikation: Konferenzbeitrag › Poster › Begutachtung

• Hot deformation behavior of a precipitate free Ni-based superalloy

  Godavarthy Anantha Venkata, R. K. P., Lizzi, F., Schaden, G., Stanojevic, A., Stockinger, M., Sommadossi, S. & Poletti, M. C., 6 Aug. 2019.

  Publikation: Konferenzbeitrag › Poster › Begutachtung

• Hot torsion tests of 100Cr6 steel to simulate the cross-roll piercing process

  Fauland, G., Beal, C., Sommitsch, C., Nunner, G. & Winter, G., 26 Sept. 2019.

  Publikation: Konferenzbeitrag › Poster

• Improvement of hydrogen induced stress corrosion cracking resistance of ultra-high strength steel screws and fasteners

  Ahmed, H. A. E., Vallant, R., Galler, M. & Sommitsch, C., 28 Sept. 2019.

  Publikation: Konferenzbeitrag › Poster

  Datei

  • Fastener 100%
  • High Strength Steels 100%
  • Stress Corrosion Cracking 100%
  • Mechanical Strength 40%
  • Carbon Dioxide 20%

• Integrated contactless temperature-control for Electron Beam Additive Manufacturing

  Theuermann, D., Pixner, F. & Enzinger, N., 26 Sept. 2019.

  Publikation: Konferenzbeitrag › Poster

• Investigation of welding parameters on geometric evolution in Wire Arc Additive Manufacturing via Cold Metal Transfer

  Zelic, A., Pixner, F. & Enzinger, N., 26 Sept. 2019.

  Publikation: Konferenzbeitrag › Poster

• Multi scale topography in titanium alloys by electron beam technique: influence on the tissue adhesion and bacterial contamination

  Warchomicka, F. G., Ramskogler, C., Ferraris, S., Cochis, A., Rimondini, L., Weinberg, A., Spriano, S. & Sommitsch, C., 8 Mai 2019, S. 1. 1 S.

  Publikation: Konferenzbeitrag › Poster

• Preliminary study on the AddJoining process over additively-manufactured metallic parts

  Belei Feliciano, C. A., Meier, B., Falck, R. & Amancio-Filho, S. T., 26 Sept. 2019.

  Publikation: Konferenzbeitrag › Poster