3D Printed Electromagnetic Absorber Built with Conductive Carbon-filled Filament

Rui Mi, Wei Zhang, Kaustav Ghosh, Sameer Walunj, Qian Liu, Jacques Rollin, Philippe Sochoux, David Pommerenke, Victor Khilkevich

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in einem KonferenzbandBegutachtung

Abstract

This article presents a method for manufacturing a frequency selective surface (FSS) using the 3D printing technology, including material characterization, design, fabrication, and evaluation. The FSS design is based on a three-layer structure. The first layer is a 3D printed lossy material, the second layer is an air gap, and the third layer is a ground plane. By changing the geometrical parameters of the 3D printed layer, it is possible to tune the frequency of the absorption band of the FSS.

Originalspracheenglisch
Titel2021 Joint IEEE International Symposium on Electromagnetic Compatibility Signal and Power Integrity, and EMC Europe, EMC/SI/PI/EMC Europe 2021
Herausgeber (Verlag)Institute of Electrical and Electronics Engineers
Seiten266-271
Seitenumfang6
ISBN (elektronisch)9781665448888
DOIs
PublikationsstatusVeröffentlicht - 26 Juli 2021
Veranstaltung2021 Joint IEEE International Symposium on Electromagnetic Compatibility Signal and Power Integrity, and EMC Europe: EMC/SI/PI/EMC Europe 2021 - Raleigh, USA / Vereinigte Staaten
Dauer: 26 Juli 202120 Aug. 2021

Publikationsreihe

Name2021 Joint IEEE International Symposium on Electromagnetic Compatibility Signal and Power Integrity, and EMC Europe, EMC/SI/PI/EMC Europe 2021

Konferenz

Konferenz2021 Joint IEEE International Symposium on Electromagnetic Compatibility Signal and Power Integrity, and EMC Europe
KurztitelEMC/SI/PI/EMC Europe 2021
Land/GebietUSA / Vereinigte Staaten
OrtRaleigh
Zeitraum26/07/2120/08/21

ASJC Scopus subject areas

  • Signalverarbeitung
  • Energieanlagenbau und Kraftwerkstechnik
  • Luft- und Raumfahrttechnik
  • Elektrotechnik und Elektronik
  • Sicherheit, Risiko, Zuverlässigkeit und Qualität
  • Strahlung

Fingerprint

Untersuchen Sie die Forschungsthemen von „3D Printed Electromagnetic Absorber Built with Conductive Carbon-filled Filament“. Zusammen bilden sie einen einzigartigen Fingerprint.

Dieses zitieren