Contactless temperature measurement in wire-based electron beam additive manufacturing Ti-6Al-4V

Florian Pixner*, Ricardo Henrique Buzolin, Sebastian Schönfelder, David Theuermann, Fernando Gustavo Warchomicka, Norbert Enzinger

*Korrespondierende/r Autor/-in für diese Arbeit

Publikation: Beitrag in einer FachzeitschriftArtikelBegutachtung


The complex thermal cycles and temperature distributions observed in additive manufacturing (AM) are of particular interest as these define the microstructure and the associated properties of the part being built. Due to the intrinsic, layer-by-layer material stacking performed, contact methods to measure temperature are not suitable, and contactless methods need to be considered. Contactless infrared irradiation techniques were applied by carrying out thermal imaging and point measurement methods using pyrometers to determine the spatial and temporal temperature distribution in wire-based electron beam AM. Due to the vacuum, additional challenges such as element evaporation must be overcome and additional shielding measures were taken to avoid interference with the contactless techniques. The emissivities were calibrated by thermocouple readings and geometric boundary conditions. Thermal cycles and temperature profiles were recorded during deposition; the temperature gradients are described and the associated temperature transients are derived. In the temperature range of the α+β field, the cooling rates fall within the range of 180 to 350 °C/s, and the microstructural characterisation indicates an associated expected transformation of β→α'+α with corresponding cooling rates. Fine acicular α and α’ formed and local misorientation was observed within α as a result of the temperature gradient and the formation of the α’
Seiten (von - bis)1307-1322
FachzeitschriftWelding in the World
Frühes Online-Datum4 März 2021
PublikationsstatusVeröffentlicht - Juli 2021

ASJC Scopus subject areas

  • Werkstoffmechanik
  • Maschinenbau
  • Metalle und Legierungen

Fields of Expertise

  • Advanced Materials Science


Untersuchen Sie die Forschungsthemen von „Contactless temperature measurement in wire-based electron beam additive manufacturing Ti-6Al-4V“. Zusammen bilden sie einen einzigartigen Fingerprint.

Dieses zitieren