Corrigendum: “Hot deformation and dynamic α-globularization of a Ti-17 alloy: Consistent physical model” (Materials & Design (2021) 197, (S0264127520308017), (10.1016/j.matdes.2020.109266)): “Hot deformation and dynamic α-globularization of a Ti-17 alloy: Consistent physical model” (Materials & Design (2021) 197, (S0264127520308017), (10.1016/j.matdes.2020.109266))

Ricardo Henrique Buzolin*, Michael Lasnik, Alfred Krumphals, Maria Cecilia Poletti

*Korrespondierende/r Autor/-in für diese Arbeit

Publikation: Beitrag in einer FachzeitschriftArtikelBegutachtung

Abstract

The authors regret to inform that Eq. (28) should be like follows: [Fourmula presented] And the caption of Figure 5 should be as follows: Fig. 5 Inverse pole figures (IPF) maps of the EBSD measurements for Ti-17 deformed at: a) 810 °C at 0.001 s−1; b) 810 °C at 1 s−1; c) 850 °C at 0.001 s−1 and d) 850 °C at 1 s−1. The black regions are the α-phase, and the matrix is β-phase. TD and ND correspond to the transversal and compression direction, respectively. Author would like to apologize for the inconvenience caused.

Originalspracheenglisch
Aufsatznummer109627
FachzeitschriftMaterials and Design
Jahrgang203
DOIs
PublikationsstatusVeröffentlicht - 2021

ASJC Scopus subject areas

  • Werkstoffwissenschaften (insg.)
  • Werkstoffmechanik
  • Maschinenbau

Fingerprint

Untersuchen Sie die Forschungsthemen von „Corrigendum: “Hot deformation and dynamic α-globularization of a Ti-17 alloy: Consistent physical model” (Materials & Design (2021) 197, (S0264127520308017), (10.1016/j.matdes.2020.109266)): “Hot deformation and dynamic α-globularization of a Ti-17 alloy: Consistent physical model” (Materials & Design (2021) 197, (S0264127520308017), (10.1016/j.matdes.2020.109266))“. Zusammen bilden sie einen einzigartigen Fingerprint.

Dieses zitieren