Development of the strongest welding consumables

Ronald Schnitzer, Phillip Haslberger, Daniel Schwarz, Wolfgang Ernst, Norbert Enzinger

Publikation: Konferenzbeitrag(Altdaten) Vortrag oder Präsentation

Abstract

The need of constructions with reduced weight and the requirement of carrying higher loads increase the demands on high strength steels. Developing high strength filler materials with acceptable toughness is an essential task for the realization of these ultra-high strength steel designs. The development of filler metals has reached now its limitation at a yield strength of 960 MPa. In order to increase the strength and reach an adequate toughness level the usage of micro-alloying elements is considered as an alternative concept compared to the conventional solid solution strengthening. These micro-alloying elements can influence grain growth behavior during solidification and cooling and increase therefore the toughness. Furthermore they can promote the formation of precipitates which result in a strengthening effect. For evaluation of the influence of different alloying elements, trial alloys of metal-cored wires were produced and tensile and notched impact samples of all-weld metal were machined. The results are presented and the most effective alloying concept for increasing the strength and maintaining the toughness is shown. Furthermore first results from comprehensive microstructural characterization are presented. Thereby atom probe tomography was applied in order to reveal the atomic-scale microstructure. These investigations should help to understand the structure-properties relationship of high strength welding consumables.
Originalspracheenglisch
PublikationsstatusVeröffentlicht - 2016
Veranstaltung9th International Conference on Processing and Manufacturing of Advanced Materials: Thermec 2016 - Stadthalle Graz, Graz, Österreich
Dauer: 29 Mai 20163 Juni 2016
https://www.tugraz.at/events/thermec-2016/home/

Konferenz

Konferenz9th International Conference on Processing and Manufacturing of Advanced Materials
KurztitelTHERMEC’2016
Land/GebietÖsterreich
OrtGraz
Zeitraum29/05/163/06/16
Internetadresse

Fields of Expertise

  • Advanced Materials Science

Dieses zitieren