Fatigue strength assessment of TIG-dressed high-strength steel cruciform joints by nominal and local approaches

According to the IIW recommendation, the fatigue strength of welded steel joints is defined as independent of the base material in case of the as-welded condition. However, post-treatment techniques can improve the fatigue performance of welded structures, especially for increased base material strengths. Therefore, this paper investigates the effect of TIG dressing, as common post-weld treatment method, on the fatigue strength of high-strength steel S700 cruciform joints. The statistically evaluated fatigue test results reveal a significant increase of the nominal fatigue strength from FAT 90 for the as-welded up to 182 MPa for the TIG-dressed state. The experiments are further compared to recommended and suggested design curves applying both nominal as well as local stress approaches. Focusing on the TIG-dressed state, the suggested increase in nominal stresses is well validated leading to a conservative assessment. In addition, the proposed slope in the finite life region with a value of m1 = 4 shows a sound fit to the statistically evaluated value of m1 = 4.7 for the test results. The local fatigue strength estimation is performed based on a recent proposal using the theory of critical distances. Therefore, linear elastic numerical analysis of the investigated specimens is performed. Again, the resulting S-N curves agree well to the experiments validating the proposed local design approach