Parametric evaluation and cost analysis in an e-axle assembly layout

Muaaz Abdul Hadi; Markus Brillinger; Martin Weinzerl

doi:10.1007/978-3-030-67241-6_4

Parametric evaluation and cost analysis in an e-axle assembly layout

Muaaz Abdul Hadi^*, Markus Brillinger, Martin Weinzerl

^*Korrespondierende/r Autor/-in für diese Arbeit

Pro2Future GmbH (98806)

Publikation: Beitrag in Buch/Bericht/Konferenzband › Beitrag in einem Konferenzband › Begutachtung

Abstract

Over the years, e-mobility has scaled exponentially, specifically automobiles, and is seen as the future. In this paper, implementation of specific adaptive technologies into the assembly line has been performed and is presented in the form of case study. The architecture and model of these technologies utilised are presented and their benefits on assembly line. Thus, indication is proven towards building a highly flexible, adaptive and cost-effective assembly line. Evaluation techniques such as FMEA, tecnomatix simulation and level of automation (LoA) study are performed to prove the improvements in qualitative, adaptive and an increase in automation levels when compared to previous manual assembly. Furthermore, the variances in e-axles are depicted with reference to e-axles from eminent electric automobile manufacturers. This is followed with a generalised assembly procedure and a cost model for the e-axle assembly. The results depict the adaptability achieved along with cost benefits when compared to an automated assembly line.

Originalsprache	englisch
Titel	5th EAI International Conference on Management of Manufacturing Systems
Redakteure/-innen	Lucia Knapčíková, Dragan Peraković, Annamária Behúnová, Marko Periša
Erscheinungsort	Springer
Herausgeber (Verlag)	Springer, Cham
Seiten	39-55
Seitenumfang	17
ISBN (elektronisch)	978-3-030-67241-6
ISBN (Print)	978-3-030-67240-9
DOIs	https://doi.org/10.1007/978-3-030-67241-6_4
Publikationsstatus	Veröffentlicht - 5 Jan. 2021
Veranstaltung	5th EAI International Conference on Management of Manufacturing Systems - Cyberspace, Virtuell, Kroatien Dauer: 27 Okt. 2020 → 28 Okt. 2020 https://manusystems.eai-conferences.org/2020/

Publikationsreihe

Name	EAI/Springer Innovations in Communication and Computing
ISSN (Print)	2522-8595
ISSN (elektronisch)	2522-8609

Konferenz

Konferenz	5th EAI International Conference on Management of Manufacturing Systems
Kurztitel	EAI MMS 2020
Land/Gebiet	Kroatien
Ort	Virtuell
Zeitraum	27/10/20 → 28/10/20
Internetadresse	https://manusystems.eai-conferences.org/2020/

ASJC Scopus subject areas

Information systems
Gesundheitsinformatik
Elektrotechnik und Elektronik
Computernetzwerke und -kommunikation

Zugriff auf Dokument

10.1007/978-3-030-67241-6_4

Parametric evaluation and cost analysis in an e-axle assembly layoutAkzeptiertes Autorenmanuskript, 916 KB

Andere Dateien und Links

http://www.scopus.com/inward/record.url?scp=85113475185&partnerID=8YFLogxK

ASP - Adaptive Intelligente Produktion
Bader, M. & Haas, F.
1/01/18 → 31/12/19
Projekt: Forschungsprojekt

Parametric evaluation and cost analysis in an e-axle assembly layout
Muaaz Abdul Hadi (Redner/in)
27 Okt. 2020
Aktivität: Vortrag oder Präsentation › Vortrag bei Konferenz oder Fachtagung › Science to science

Dieses zitieren

Abdul Hadi, M., Brillinger, M., & Weinzerl, M. (2021). Parametric evaluation and cost analysis in an e-axle assembly layout. in L. Knapčíková, D. Peraković, A. Behúnová, & M. Periša (Hrsg.), 5th EAI International Conference on Management of Manufacturing Systems (S. 39-55). (EAI/Springer Innovations in Communication and Computing). Springer, Cham. https://doi.org/10.1007/978-3-030-67241-6_4

Parametric evaluation and cost analysis in an e-axle assembly layout. / Abdul Hadi, Muaaz; Brillinger, Markus; Weinzerl, Martin.
5th EAI International Conference on Management of Manufacturing Systems. Hrsg. / Lucia Knapčíková; Dragan Peraković; Annamária Behúnová; Marko Periša. Springer: Springer, Cham, 2021. S. 39-55 (EAI/Springer Innovations in Communication and Computing).

Publikation: Beitrag in Buch/Bericht/Konferenzband › Beitrag in einem Konferenzband › Begutachtung

Abdul Hadi, M, Brillinger, M & Weinzerl, M 2021, Parametric evaluation and cost analysis in an e-axle assembly layout. in L Knapčíková, D Peraković, A Behúnová & M Periša (Hrsg.), 5th EAI International Conference on Management of Manufacturing Systems. EAI/Springer Innovations in Communication and Computing, Springer, Cham, Springer, S. 39-55, 5th EAI International Conference on Management of Manufacturing Systems, Virtuell, Kroatien, 27/10/20. https://doi.org/10.1007/978-3-030-67241-6_4

Abdul Hadi M, Brillinger M, Weinzerl M. Parametric evaluation and cost analysis in an e-axle assembly layout. in Knapčíková L, Peraković D, Behúnová A, Periša M, Hrsg., 5th EAI International Conference on Management of Manufacturing Systems. Springer: Springer, Cham. 2021. S. 39-55. (EAI/Springer Innovations in Communication and Computing). doi: 10.1007/978-3-030-67241-6_4

Abdul Hadi, Muaaz ; Brillinger, Markus ; Weinzerl, Martin. / Parametric evaluation and cost analysis in an e-axle assembly layout. 5th EAI International Conference on Management of Manufacturing Systems. Hrsg. / Lucia Knapčíková ; Dragan Peraković ; Annamária Behúnová ; Marko Periša. Springer : Springer, Cham, 2021. S. 39-55 (EAI/Springer Innovations in Communication and Computing).

@inproceedings{f3fabfbf1dec4c1c862d711302e1a6f4,

title = "Parametric evaluation and cost analysis in an e-axle assembly layout",

abstract = "Over the years, e-mobility has scaled exponentially, specifically automobiles, and is seen as the future. In this paper, implementation of specific adaptive technologies into the assembly line has been performed and is presented in the form of case study. The architecture and model of these technologies utilised are presented and their benefits on assembly line. Thus, indication is proven towards building a highly flexible, adaptive and cost-effective assembly line. Evaluation techniques such as FMEA, tecnomatix simulation and level of automation (LoA) study are performed to prove the improvements in qualitative, adaptive and an increase in automation levels when compared to previous manual assembly. Furthermore, the variances in e-axles are depicted with reference to e-axles from eminent electric automobile manufacturers. This is followed with a generalised assembly procedure and a cost model for the e-axle assembly. The results depict the adaptability achieved along with cost benefits when compared to an automated assembly line.",

keywords = "Adaptive assembly of e-axles, E-mobility, Qualitative and cost analysis",

author = "{Abdul Hadi}, Muaaz and Markus Brillinger and Martin Weinzerl",

year = "2021",

month = jan,

day = "5",

doi = "10.1007/978-3-030-67241-6_4",

language = "English",

isbn = "978-3-030-67240-9",

series = "EAI/Springer Innovations in Communication and Computing",

publisher = "Springer, Cham",

pages = "39--55",

editor = "Lucia Knap{\v c}{\'i}kov{\'a} and Dragan Perakovi{\'c} and Annam{\'a}ria Beh{\'u}nov{\'a} and Marko Peri{\v s}a",

booktitle = "5th EAI International Conference on Management of Manufacturing Systems",

note = "5th EAI International Conference on Management of Manufacturing Systems, EAI MMS 2020 ; Conference date: 27-10-2020 Through 28-10-2020",

url = "https://manusystems.eai-conferences.org/2020/",

}

TY - GEN

T1 - Parametric evaluation and cost analysis in an e-axle assembly layout

AU - Abdul Hadi, Muaaz

AU - Brillinger, Markus

AU - Weinzerl, Martin

PY - 2021/1/5

Y1 - 2021/1/5

N2 - Over the years, e-mobility has scaled exponentially, specifically automobiles, and is seen as the future. In this paper, implementation of specific adaptive technologies into the assembly line has been performed and is presented in the form of case study. The architecture and model of these technologies utilised are presented and their benefits on assembly line. Thus, indication is proven towards building a highly flexible, adaptive and cost-effective assembly line. Evaluation techniques such as FMEA, tecnomatix simulation and level of automation (LoA) study are performed to prove the improvements in qualitative, adaptive and an increase in automation levels when compared to previous manual assembly. Furthermore, the variances in e-axles are depicted with reference to e-axles from eminent electric automobile manufacturers. This is followed with a generalised assembly procedure and a cost model for the e-axle assembly. The results depict the adaptability achieved along with cost benefits when compared to an automated assembly line.

AB - Over the years, e-mobility has scaled exponentially, specifically automobiles, and is seen as the future. In this paper, implementation of specific adaptive technologies into the assembly line has been performed and is presented in the form of case study. The architecture and model of these technologies utilised are presented and their benefits on assembly line. Thus, indication is proven towards building a highly flexible, adaptive and cost-effective assembly line. Evaluation techniques such as FMEA, tecnomatix simulation and level of automation (LoA) study are performed to prove the improvements in qualitative, adaptive and an increase in automation levels when compared to previous manual assembly. Furthermore, the variances in e-axles are depicted with reference to e-axles from eminent electric automobile manufacturers. This is followed with a generalised assembly procedure and a cost model for the e-axle assembly. The results depict the adaptability achieved along with cost benefits when compared to an automated assembly line.

KW - Adaptive assembly of e-axles

KW - E-mobility

KW - Qualitative and cost analysis

UR - http://www.scopus.com/inward/record.url?scp=85113475185&partnerID=8YFLogxK

U2 - 10.1007/978-3-030-67241-6_4

DO - 10.1007/978-3-030-67241-6_4

M3 - Conference paper

SN - 978-3-030-67240-9

T3 - EAI/Springer Innovations in Communication and Computing

SP - 39

EP - 55

BT - 5th EAI International Conference on Management of Manufacturing Systems

A2 - Knapčíková, Lucia

A2 - Peraković, Dragan

A2 - Behúnová, Annamária

A2 - Periša, Marko

PB - Springer, Cham

CY - Springer

T2 - 5th EAI International Conference on Management of Manufacturing Systems

Y2 - 27 October 2020 through 28 October 2020

ER -

Parametric evaluation and cost analysis in an e-axle assembly layout

Abstract

Publikationsreihe

Konferenz

ASJC Scopus subject areas

Zugriff auf Dokument

Andere Dateien und Links

Fingerprint

Projekte

ASP - Adaptive Intelligente Produktion

Aktivitäten

Parametric evaluation and cost analysis in an e-axle assembly layout

Dieses zitieren