Validation of a new high frequency testing technique in the VHCF regime – Fatigue properties of a 42CrMoS4 and X5CrNiCuNb16-4 steel

I. Milošević*, P. Renhart, G. Winter, F. Grün, M. Kober

*Korrespondierende/r Autor/-in für diese Arbeit

Publikation: Beitrag in einer FachzeitschriftArtikelBegutachtung

Abstract

In times of highly loaded components, effort is put into lightweight concepts and to increase service life. The investigation of material fatigue has become very important. In the last years, the ultrasonic testing equipment (UTE) lead to numerous scientific work in the very high cycle fatigue (VHCF) regime. In this work fatigue results are shown, which were determined by a new high frequency vibration technique (HFVT). This facility operates at a frequency of f = 928 ± 8 Hz respectively f = 930 ± 5 Hz. The materials used in this investigation are a 42CrMoS4 (M-A) and a X5CrNiCuNb16-4 (M-B) steel. High frequency fatigue tests were compared with conventional servo-hydraulic fatigue tests at 30 Hz. An increase of fatigue strength was determined (higher strain rate) for both material configurations. In the area of high stress amplitudes and low stress amplitudes material dependent differences were observed. In general, it can be said that this effect decreased towards lower stress amplitudes.

Originalspracheenglisch
Seiten (von - bis)198-205
Seitenumfang8
FachzeitschriftInternational Journal of Fatigue
Jahrgang112
DOIs
PublikationsstatusVeröffentlicht - 1 Juli 2018

ASJC Scopus subject areas

  • Modellierung und Simulation
  • Werkstoffwissenschaften (insg.)
  • Werkstoffmechanik
  • Maschinenbau
  • Wirtschaftsingenieurwesen und Fertigungstechnik

Fields of Expertise

  • Sustainable Systems

Fingerprint

Untersuchen Sie die Forschungsthemen von „Validation of a new high frequency testing technique in the VHCF regime – Fatigue properties of a 42CrMoS4 and X5CrNiCuNb16-4 steel“. Zusammen bilden sie einen einzigartigen Fingerprint.

Dieses zitieren