Projects per year
- 1 - 50 out of 1,086 results
Search results
-
Research area
Setup and application of highly stable and wave length steerable semiconductor laser diodes
1/01/94 → 31/05/97
Project: Research area
-
The mechanical consequences of radial and tangential volume forces in loose Roebel bars of large synchronous machines
Grabner, C.
1/08/01 → 30/09/01
Project: Research area
-
Optimization of the electrical traction system for a electric vehicle
Ingruber, R.
1/09/01 → 30/04/02
Project: Research area
-
-
Construction and Simulation of line side converters of parallel resonance link frequency changers
1/01/94 → 31/01/95
Project: Research area
-
Wireless Broadband Networking
Birnbacher, U., Kogler, W., Schrotter, P., Gappmair, W. & Koudelka, O. F. S.
1/04/02 → 30/09/20
Project: Research area
-
Electrostatic charging of high-voltage power transformers (finished)
1/01/95 → 31/01/01
Project: Research area
-
Model Based Control of Fluidized Bed Biomass Steam Gasification
1/06/15 → 31/05/18
Project: Research area
-
-
Nonideal behaviour of PWM voltage-source-inverters
Weichbold, P.
1/01/98 → 28/02/01
Project: Research area
-
Investigation of laser speckle change due to material deformation
Feiel, R.
1/11/95 → 31/01/01
Project: Research area
-
High-voltage tests on cables, outdoor insulation and oil/paper insulating systems (finished)
1/01/95 → 31/01/01
Project: Research area
-
Numerical computation of iron losses in a permanent assisted synchronous machine taking account of the kind of magnetisation due to higher harmonics.
Grabner, C.
1/06/02 → 31/10/03
Project: Research area
-
-
Wireless Communications
Dizdarevic, V., Tampubolon Baringbing, J. W., Arnitz, D., Gigl, T., Meissner, P., Alemseged Demessie, Y., Witrisal, K., Krall, C. & Geiger, B.
1/07/03 → 31/12/23
Project: Research area
-
Real-Time Artificial Intelligence
Raaber, F., Rinner, B., Weiß, U., Steger, C., Lauber, J. & Weiß, R.
1/01/95 → 31/01/07
Project: Research area
-
-
-
-
Deformation of composites caused by electromagnetic forces
Grabner, C.
1/06/01 → 31/08/01
Project: Research area
-
Volume forces in Roebel bars inside slots, forces at the boundary of the slot - A closer view on electromagnetic origin and mechanical consequences
Grabner, C.
1/01/01 → 31/01/01
Project: Research area
-
-
Load side converter of a parallel resonance link frequency changer
1/01/95 → 31/01/96
Project: Research area
-
Models for calculating the power dissipation in the switching components of pulse-controlled inverters
1/01/93 → 31/01/95
Project: Research area
-
Strategies for the design, construction and uilding of cooling cycles of electrical drive systems.
Grabner, C.
1/01/02 → 1/12/03
Project: Research area
-
On the use of a hybrid technique with regard to a specific electromechanical problem in electrical machines
Grabner, C.
1/01/02 → 31/10/02
Project: Research area
-
-
Partial discharge (PD) measuring technique (finished)
Schwarz, R., Pack, S. & Körbler, B.
1/01/95 → 31/01/01
Project: Research area
-
Estimation of Blood Velocity with High Frequency Ultrasound
Zagar, B.
1/01/96 → 31/01/01
Project: Research area
-
Three Dimensional Color Flow Mapping for the Detection and Assessment of Breast Cancer
Zagar, B.
1/01/94 → 31/01/01
Project: Research area
-
Inverter-fed asynchronous machines for high-temperature positioning applications
1/02/13 → 31/01/16
Project: Research area
-
-
-
-
High temperature effects on Laser speckle correlation as used in strain and displacement sensors
Woellik, H.
1/01/96 → 31/01/99
Project: Research area
-
-
Untersuchungen zur Stochastisch-Ergodischen Signaltechnik
Costa, A. K. J.
1/01/97 → 31/01/99
Project: Research area
-
Performance of asymmetrically fed three phase induction machines
Fresacher, G.
1/01/98 → 31/10/99
Project: Research area
-
Reactance Calculation of a 500 MVA Hydro-Generator using a Finite Element Analysis with Superelements
Grabner, C.
1/03/01 → 31/03/01
Project: Research area
-
Comparison of MCT and IGBT in Soft and Hard Switching Applications
1/01/96 → 31/01/98
Project: Research area
-
-
Numerical computation of electromagnetic force densities at solid material boundaries regarding magnetic saturation
Grabner, C.
1/01/02 → 30/09/02
Project: Research area
-
Analytical and numerical computation of natural resonance frequencies of different stator arrangements taking account of the electrical insulation as well as the material the coils are built up.
Grabner, C.
1/01/03 → 30/09/03
Project: Research area
-
-
Thermal Resistance Identification of N-Body Systems by Solving Over-Determined Differential Equations
Köfler, H. & Traußnigg, U.
1/05/99 → 31/01/04
Project: Research area
-
-
-
Smart Systems
Sporer, H., Brenner, E., Pölzlbauer, F., Macher, G., Mentin, C., Aschbacher, H. & Grasser, M. G.
1/09/14 → 30/09/21
Project: Research area
-
-
Parallel Systems and Multi-DSP Systems
Böhnel, M., Steger, C., Rinner, B., Kröpfl, A., Brenner, E. & Schmid, M.
1/01/95 → 31/01/12
Project: Research area