Faculty of Mechanical Engineering and Economic Sciences (3000)

Graz University of Technology (90000)

Phone0316 / 873-7113, 7611, 7111, 7114 u. 7116
Emaildekanat.mbww@tugraz.at
Websitehttp://www.tugraz.at/fakultaeten/maschinenbau/home/

primary organisation addressShow on map
8010
Inffeldgasse 23 Graz
Austria

2 Curtailed
14 Not started
289 Active
1802 Finished

600 - 650 out of 2,107 results

DClay - DC layouting
Landschützer, C.
15/03/19 → 30/06/19
Project: Research project
DC-Plannung - Galvanizing Concepts
Jodin, D.
15/10/13 → 31/03/14
Project: Research project
DeCarb - Empowering enterprises towards zero carbon from science to action
Hirz, M., Haas, F., Kreuzer, E., Zernig, N. & Passer, A.
1/10/22 → 30/09/24
Project: Research project
Deckenstütze - Prop made of high-strength steel
Enzinger, N.
1/03/17 → 28/02/20
Project: Research project
DECSIM - Joint simulation model for strategic decision support
Lichtenegger, G. C., Tieber, G., Neubacher, D. & Vössner, S.
1/01/11 → 31/01/14
Project: Research project
DEEMIR - Design Evaluation of Electrical Machines Including Random parameter variations
Ellermann, K. & Biro, O.
1/04/14 → 31/03/17
Project: Research project
DekarbWP - Decarbonisation of heating and cooling supply by means of absorption heat pumping systems
Wernhart, M. W. & Rieberer, R.
1/03/22 → 29/02/24
Project: Research project
DEM-Schnecke - DEM for material handling equipment
Fritz, M. & Landschützer, C.
17/03/14 → 30/09/14
Project: Research project
denkMalaktiv - Sanierung alter, denkmalgeschützter Gebäude auf Aktivhaus-Standard?
Streicher, W., Heimrath, R., Brandl, D. & Mach, T.
1/10/09 → 31/10/12
Project: Research project
Deployment of a General Applicable Tool for Process Improvement based on Six Sigma (dissertation)
1/01/01 → 31/07/15
Project: Research project
DeRiskDH - Risk minimization for decarbonizing heating networks via network temperature reductions and flexibility utilization
Hochenauer, C., Mach, T., Heinz, A. & Heimrath, R.
15/01/23 → 14/01/26
Project: Research project
Descale and deburing of gear hollow shafts
Mortsch, M.
10/04/10 → 31/12/15
Project: Research project
Design, calculation and construction of a catchment (flood)
Draxl, H.
1/01/95 → 31/01/99
Project: Research project
Design, construction, building and implementing of a gear testbed for car gear boxes
Grünbaum, P., Jürgens, G., Joch, M. & Löffler, J.
1/03/98 → 31/10/00
Project: Research project
Design, construction, calculation and building of test stands for basic research on non rotund toothed gears
Kollreider, A., Moser, C. & Habenbacher, J.
1/05/98 → 31/05/00
Project: Research project
Design4SusMan - Designing an Erasmus Mundus Master on Digital and Sustainable Manufacturing
Zunk, B. M. & Omazic, A.
1/10/22 → 31/12/23
Project: Research project
Design and Construction of an Articulated Bogie Frame for Lean Technology Vehicles
Jud, W.
1/01/95 → 31/07/15
Project: Research project
Design and Optimization of Heat Exchangers
Brenn, G. & Meile, W.
1/01/97 → 31/01/00
Project: Research project
Design and test of a blower for a small compressor
Benigni, H. & Logar, R.
1/03/02 → 30/04/02
Project: Research project
Design of a Centrifugal Compressor
Sanz, W. & Gehrer, A. A.
1/02/99 → 30/06/99
Project: Research project
Design of a Kaplan Turbine
Penninger, G.
1/01/03 → 31/01/04
Project: Research project
Design of an IT-supported experiment management system for engineering
Hösch, S., Vorraber, W. & Vössner, S.
1/05/08 → 30/11/08
Project: Research project
Design of a parametric vehicle in CATIA V5
Göber, T. & Hirz, M.
1/10/03 → 15/12/03
Project: Research project
Design of Rotory Pump for Extremly Low Specific Speed
Penninger, G. & Benigni, H.
1/01/03 → 31/01/04
Project: Research project
Desing of High Performance Organizations Applied to Software Development (dissertation)
1/01/96 → 31/03/99
Project: Research project
DeStoSimKaFe - Concept development & coupled deterministic / stochastic Assessment of cold district heating for heating and cooling supply
Hochenauer, C., Nageler, P. J., Heimrath, R., Mach, T. & Edtmayer, H.
1/09/18 → 31/08/20
Project: Research project
DETEKTIV - Detektion von Konflikt- und Unfallstellen durch Informations- und Kommunikationstechnologien im Verkehr
Kirschbichler, S. K. & Tomasch, E.
1/09/12 → 31/08/13
Project: Research project
Determination of Load Collectives for an All Wheel Driven Vehicle
Moser, C.
1/01/95 → 31/07/15
Project: Research project
Determining Emission Factors from Vehicles
Blassnegger, J., Rexeis, M., Ivanisin, M., Engler, D. & Hausberger, S.
1/01/97 → 31/01/99
Project: Research project
Development and Construction of an Optimized Wheelset for Bogies of Rail Cars with Lean Mechanics
Moser, C.
1/01/95 → 31/07/15
Project: Research project
Development and implementation of a QM System according to EN 17025
Tomasch, E.
1/03/07 → 31/07/09
Project: Research project
Development and Optimisation of an Entirely New Vehicle Concept for Small Capacity Engines
Hirschberg, W. & Koller, G.
2/01/02 → …
Project: Research project
Development and Realization of Test Rigs
Kreimer, G., Rieger, M. & Miorini, H.
1/06/08 → …
Project: Research area
Development of a Combined Wheeled-Legged Machine
Six, K. & Kecskemethy, A.
1/01/95 → 31/01/01
Project: Research project
Development of a computerized materials selection system
Haider, T. & Cerjak, H.
1/12/95 → 31/12/97
Project: Research project
Development of a FEM Preprocessor for the Calculation of Helical Springs
Moser, C.
1/01/95 → 31/07/15
Project: Research project
Development of Al-Flux-Cored Wire (MCL-J6)
Cerjak, H.
1/10/02 → 30/09/05
Project: Research project
Development of a low cost linear friction welding machine
Buchmayr, B.
1/10/98 → 30/09/00
Project: Research project
Development of a Low Loss Drive for Piezo Servo Valves
Faber, F.
1/09/94 → 31/07/15
Project: Research project
Development of Alternative Combustion Processes
Eichlseder, H.
1/01/02 → …
Project: Research project
Development of a Model for the Prediction of Hot Cracking in Casting (MCL-M4)
Buchmayr, B., Kozeschnik, E. & Rindler, W.
15/07/99 → 28/02/03
Project: Research project
Development of a Modular Running Gear for a Family of Articulated Bogies
Moser, C.
1/01/95 → 31/07/15
Project: Research project
Development of an elongational rheometer
Brenn, G.
1/09/02 → 1/02/03
Project: Research project
Development of a new cast iron cylinder with an optimised piston shape for a 50cc water-cooled two-stroke engine
Krobath, A.
1/11/02 → 31/01/03
Project: Research project
Development of an Expertise System to Analyze and Optimize the Technical and Economic Feasibility of Hybrid Large Scale Solar Heating Systems
Streicher, W.
17/08/00 → 30/06/02
Project: Research project
Development of an Operational Dispersion Model for Dispersion of Exhaust Gases from Tunnel Portals
Sturm, P.
1/01/02 → 31/01/07
Project: Research project
Development of a Preprocessing Modul for FE-Programs to Calculate the Residual Stresses in Welded Components
1/02/95 → 31/07/15
Project: Research area
Development of a Test Method to Optimize the Spray Distribution of Fans for Fruit Plantations
Meinhart, J.
1/02/97 → 31/12/98
Project: Research project
Development of bainitic rail steels
Ghanimi, Y.
1/03/95 → 30/06/98
Project: Research project
Development of Control Systems for Powershift and Powershuttle Gears
Hochleitner, H.
1/01/99 → 31/07/15
Project: Research project