Institute of Materials Science, Joining and Forming (3030)

Research output

Research output per year 1992 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2018 2019 2022 2025

• 754 Article
• 610 Conference paper
• 422 (Old data) Lecture or Presentation
• 190 Poster
• 358 More
  • 71 Other report
  • 34 Diploma Thesis
  • 33 Book
  • 32 Chapter
  • 31 Commissioned report
  • 28 Abstract
  • 26 Conference article
  • 19 Paper
  • 18 Doctoral Thesis
  • 13 Patent
  • 11 Anthology
  • 10 Review article
  • 8 Editorial
  • 7 Master's Thesis
  • 5 Habilitation
  • 3 Comment/debate
  • 3 Bachelor's Thesis
  • 2 Foreword/postscript
  • 2 Other contribution
  • 1 Letter
  • 1 Website / Web publication

Research output per year

Research output per year

Search results

• 2024

  A comprehensive mean-field approach to simulate the microstructure during the hot forming of Ti-17

  Miller Branco Ferraz, F., Buzolin, R. H., Maßwohl, M., Shahryari, E., Krumphals, A. & Poletti, M. C., Jun 2024, In: Materials Science and Engineering A . 903, 20 p., 146645.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Hot Working 100%
  • Mechanical Response 100%
  • Field Model 100%
  • Final Microstructure 100%
  • Strain Rate 100%

• ADDITIVE FERTIGUNG VON HOCHFESTEN STAHLSTRUKTUREN AUF KONVENTIONELLEN VERGÜTUNGSSTÄHLEN

  Moschinger, M. & Enzinger, N., May 2024, In: Additive Fertigung. 2024, 2, p. 60-61 2 p.

  Research output: Contribution to journal › Article

• Al- and Ta-Modified Alloy 740 Superalloy Castings Produced in Non-vacuum Conditions—Microstructure and Selected Properties

  Grudzień-Rakoczy, M., Rakoczy, Ł., Lech, S., Dudziak, T., Rząd, E., Goły, M., Paćko, M., Chrzan, K., Cygan, R. & Poletti, C., Oct 2024, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 55, 10, p. 3839-3858 20 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Superalloys 100%
  • Ultimate Tensile Strength 50%
  • Oxidation Reaction 50%
  • Heat Treatment 25%
  • Tantalum 25%

• A method for manufacturing a mechanically strong and durable hybrid structure of polyethylene–hydroxyapatite composite and titanium alloy

  Marcatto de Oliveira, G. H. & Canto, L. B., Apr 2024, In: Polymer Engineering and Science. 64, 4, p. 1548-1554 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Composite Material 100%
  • Titanium Alloy 100%
  • Density 66%
  • Polyethylene 66%
  • Fatigue of Materials 66%

• Analysis of modified surface topographies of titanium-based hip implants using finite element method

  Vulović, A., Warchomicka, F. G., Pixner, F. & Filipović, N., 14 Mar 2024, In: Technology and Health Care. 32, 2, p. 1123-1133 11 p.

  Research output: Contribution to journal › Article › peer-review

  • Hip Implant 100%
  • Cancellous Bone 14%

• A predictive mesoscale model for continuous dynamic recrystallization

  Miller Branco Ferraz, F., Buzolin, R. H., Ebenbauer, S., Leitner, T., Krumphals, A. & Poletti, M. C., Aug 2024, In: International Journal of Plasticity. 179, 104022.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Dynamic Recrystallization 100%
  • Continuous Dynamic 100%
  • Mesoscale 100%
  • Strain Rate 100%
  • Large Deformation 100%

• Comparison of Mechanical Properties of Bulk NiAl-Re-Al₂O₃ Intermetallic Material Manufactured by Laser Powder Bed Fusion and Hot Pressing

  Bochenek, K., Arneitz, S., Sommitsch, C. & Basista, M., Sept 2024, In: Journal of Materials Engineering and Performance. 33, 18, p. 9547-9556 10 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Intermetallics 100%
  • Al2O3 100%
  • Hot Pressing 100%
  • Laser Powder Bed Fusion 100%
  • Three Dimensional Printing 87%

• Computational welding simulation of a plasma wire arc additive manufacturing process for high-strength steel

  Schönegger, S., Moschinger, M. & Enzinger, N., 2024, In: European Journal of Materials. 4, 1, 15 p., 2297051.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • High Strength Steel 100%
  • Wire Arc Additive Manufacturing 100%
  • High Energy Density 50%
  • Plasma Welding 33%
  • Metallographic Examination 33%

• Controlled Wrinkle Patterning on Thin Films to Improve Hydrophobicity

  Aghito, M., Hernandéz Rodríguez, G., Antonini, C. & Coclite, A. M., 25 Jun 2024, In: Langmuir. 40, 25, p. 13017-13024 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Thin Films 100%
  • Coating Thickness 100%
  • Surface (Surface Science) 100%
  • Hydrophobicity 100%
  • Nanometre 50%

• Corrosion-resistant and ultrafine-grained boron-containing stainless steel produced by laser powder bed fusion

  J. M. Freitas, B., Yuuki Koga , G., Amancio-Filho, S. T. & Bolfarini, C., 15 Jul 2024, In: Corrosion Science. 235, 10 p., 112206.

  Research output: Contribution to journal › Article › peer-review

  • Stainless Steel 100%
  • Boron 100%
  • Corrosion Resistance 100%
  • Laser Powder Bed Fusion 100%
  • Three Dimensional Printing 33%

• Deformation behavior of aluminum alloy rivets for aerospace applications

  Silvayeh, Z., Brillinger, M. & Domitner, J., Nov 2024, In: Journal of Materials Research and Technology. 33, p. 3482-3491 10 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Aluminum Alloy 100%
  • Strain Rate 50%
  • Yield Stress 25%
  • Work Hardening 25%
  • Aircraft 25%

• Dynamic recrystallisation in Inconel®718 at creep conditions

  Pradeep, K., Buzolin, R. H., Domankova, M., Godor, F., Stanojevic, A. & Poletti, M. C., Feb 2024, In: Materials Science and Engineering: A. 893, 146146.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Creep 100%
  • Creep Resistance 100%
  • Density 60%
  • Nickel-Based Superalloys 40%
  • Intermetallic Compound 40%

• Effect of Ce and solidification cooling rate on the microstructure and mechanical properties of AA2017 aluminum alloy

  Rojas-Arias, N., Soares Silva, A., de Albuquerque Sousa, S. M., de Gouveia, G. L., Amancio-Filho, S. T., Coury, F. G., Spinelli, J. E. & Gargarella, P., 5 Sept 2024, In: Journal of Alloys and Compounds. 998, 14 p., 174848.

  Research output: Contribution to journal › Article › peer-review

  • Solidification 100%
  • Aluminum Alloy 100%
  • Microhardness 40%
  • Grain Size 40%
  • Mechanical Property 20%

• Engineering approach for modeling the deformation and fracture behavior of thin welds

  Silvayeh, Z., Domitner, J., Müller, M., Auer, P., Sommitsch, C. & Mayr, P., Mar 2024, In: Results in Engineering. 21, 101799.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Aluminum Alloy 100%
  • Fracture Behavior 100%
  • Mechanical Property 50%
  • Tensile Testing 50%
  • Surface (Surface Science) 25%

• Experimental and Numerical Analysis of the Three-Point Bending Behavior of Hybrid Adhesive-Bonded Aluminum–Wood Plates

  Graf, E., Matz, P., Auer, P., Kurzböck, C., Krenke, T., Painer, J., Gruber, L., Frieß, M., Bauer, C., Sommitsch, C. & Domitner, J., Jul 2024, In: Journal of Materials Engineering and Performance. 33, 13, p. 6387-6397 11 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Aluminum Alloy 100%
  • Bending Force 100%
  • Aluminum 66%
  • Surface (Surface Science) 33%
  • Materials Property 33%

• Exploring a novel chamfered tool design for short duration refill friction stir spot welds of high strength aluminium

  Draper, J., Fritsche, S., Amancio-Filho, S. T., Galloway, A. & Toumpis, A., Apr 2024, In: The International Journal of Advanced Manufacturing Technology. 131, 12, p. 5867-5879 13 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Aluminum 100%
  • Spot Welding 100%
  • Welded Joint 100%
  • Tool Design 100%
  • Aluminum Alloy 50%

• Exploring the boundaries of refill friction stir spot welding: influence of short welding times on joint performance

  Draper, J., Fritsche, S., Garrick, A., Amancio-Filho, S. T., Toumpis, A. & Galloway, A., Jul 2024, In: Welding in the World. 68, 7, p. 1801-1813 13 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Joints (Structural Components) 100%
  • Weld 100%
  • Spot Welding 100%
  • Rotational Speed 100%
  • Lap Shear Strength 66%

• Gefügecharakterisierung von 15Cr-Stahl nach dem Abschrecken und langsamen Abkühlen: Microstructural characterization of 15Cr steel after quenching and slow cooling rates

  Ahmadi, M. R., Meixner, F., Dománková, M., Raus, M., Sonderegger, B. & Sommitsch, C., Feb 2024, In: Praktische Metallographie/Practical Metallography. 61, 2, p. 68-89 22 p.

  Research output: Contribution to journal › Article › peer-review

• Heterogeneous dynamic restoration of Ti–15Mo alloy during hot compression

  Shahryari, E., Poletti, M. C., Preisler, D., Harcuba, P., Stráský, J., Janeček, M. & Warchomicka, F. G., 9 Nov 2024, In: Journal of Materials Research and Technology. 33, p. 7656-7667 12 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Strain Rate 100%
  • Work Hardening 40%
  • Electron Backscatter Diffraction 40%
  • Restoration Process 25%
  • Alloying 20%

• Influence of the heat treatment path on the precipitation sequence in an AlSi7Cu0.5Mg-alloy

  Wang, R., Gonzalez, C., Stauder, B., Fernández Gutiérrez, R., Albu, M., Sommadossi, S., Povoden-Karadeniz, E. & Poletti, M. C., 30 Jun 2024, In: Journal of Alloys and Compounds. 990, 174450.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Heat Treatment 100%
  • Solidification 40%
  • Quenching 25%
  • Artificial Ageing 25%
  • Cylinder Heads 25%

• Investigation of complex single-walled intersecting structures fabricated by wire-arc directed energy deposition

  Silmbroth, M., Enzinger, N., Senck, S., Radlmayr, K. & Klein, T., 27 Aug 2024, In: Rapid Prototyping Journal. 30, 8, p. 1707-1716 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Additive Manufacturing 100%
  • Complex Structure 100%
  • Improvement Potential 100%
  • Mg-Al Alloy 100%
  • Quality Part 100%

• Long term hydrogen storage properties of ZK60 Mg-alloy as processed by different methods of SPD

  Cengeri, P., Kimoto, Y., Janoska, M., Abbasi, Z., Morisada, Y., Fujii, H., Enzinger, N., Sommitsch, C., Boczkal, G., Krexner, G., Zehetbauer, M. J. & Schafler, E., Apr 2024, In: Journal of Materials Science. 59, 14, p. 5906-5922 17 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Plastic Deformation 100%
  • Magnesium Alloys 100%
  • Differential Scanning Calorimetry 100%
  • Hydrogenation 100%
  • Density 16%

• Mapping electro-vortex flow patterns from tornado to inverted tornado in a hemispherical container

  Abdi, M., Karimi-Sibaki, E., Sommitsch, C., Barati, H., Al-Nasser, M., Wu, M., Teplyakov, I. & Kharicha, A., Aug 2024, In: International Journal of Thermofluids. 23, 100721.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Flow Distribution 100%
  • Vortex 100%
  • Flow Pattern 100%
  • Magnetohydrodynamics 100%
  • Fluid Flow 100%

• Microstructural and textural evolution of double stage cold rolled non-grain oriented electrical steel

  Neundlinger, L., Kreuzer, H., Lichtenberger, H., Hebesberger, T. & Sommitsch, C., May 2024, In: Journal of Magnetism and Magnetic Materials. 597, 172032.

  Research output: Contribution to journal › Article › peer-review

  • Magnetic Property 100%
  • Electrical Steel 100%
  • Cold Rolling 100%
  • Annealing 75%
  • Grain Size 75%

• Microstructure, tensile strength, and hardness of AA5024 modified with ZrH4 additions produced by laser powder bed fusion

  Minkowitz, L., Buzolin, R. H., Arneitz, S. & Amancio Filho, S. T., Jun 2024, In: Materials Characterization. 212, 16 p., 113963.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Ultimate Tensile Strength 100%
  • Laser Powder Bed Fusion 100%
  • Grained Region 100%
  • Solidification 33%
  • Scanning Electron Microscopy 33%

• Numerical Modeling of Distortions and Residual Stresses During Wire Arc Additive Manufacturing of an ER 5183 Alloy with Weaving Deposition

  Drexler, H., Haunreiter, F., Raberger, L., Reiter, L., Hütter, A. & Enzinger, N., 12 Jan 2024, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte. 169, 1, p. 38-47 10 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Additive Manufacturing 100%
  • Actuator 100%
  • Heat Source 100%
  • Residual Stress 100%
  • Numerical Modeling 100%

• Optimizing LPBF-parameters by Box-Behnken design for printing crack-free and dense high-boron alloyed stainless steel parts

  J. M. Freitas, B., Y. Koga, G., Arneitz, S., Bolfarini, C. & Amancio-Filho, S. T., Apr 2024, In: Additive Manufacturing Letters. 9, 10 p., 100206.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Stainless Steel 100%
  • Boron 100%
  • Laser Powder Bed Fusion 100%
  • Fusion Parameter 100%
  • Boride 40%

• Plasma wire arc additive manufacturing and its influence on high‑carbon steel substrate properties

  Moschinger, M., Vauderwange, T. & Enzinger, N., Aug 2024, In: Welding in the World. 68, 8, p. 1999-2011 13 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Additive Manufacturing 100%
  • Penetration Depth 100%
  • Three Dimensional Printing 100%
  • Wire Arc Additive Manufacturing 100%
  • High-Carbon Steels 50%

• Processing understanding, mechanical durability and hygrothermal stability of PC/AA6061 hybrid joints produced via injection overmolding

  Marcatto de Oliveira, G. H., Amancio-Filho, S. T. & Canto, L. B., Mar 2024, In: International Journal of Adhesion and Adhesives. 130, 103617.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Polycarbonate 100%
  • Aluminum Alloy 25%
  • Experimental Design 25%
  • Fatigue of Materials 25%
  • Injection Speed 25%

• Representation of the microstructure of pearlitic steels for DEM simulations of fatigue

  Davoodi Jooneghani, H., Six, K., Sharifi, S. S., Poletti, M. C. & Trummer, G., 15 Mar 2024, In: Wear. 540-541, 205228.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Anisotropy 100%
  • Discrete Element Method 100%
  • Scanning Electron Microscopy 100%
  • Electron Backscatter Diffraction 100%
  • Plastic Deformation 100%

• Residual stresses in a wire and arc-directed energy-deposited Al–6Cu–Mn (ER2319) alloy determined by energy-dispersive high-energy X-ray diffraction

  Klein, T., Spörk-Erdely, P., Schneider-Broeskamp, C., Oliveira, J. P. & Abreu Faria, G., Mar 2024, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 55, 3, p. 736-744 9 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Residual Stress 100%
  • X-Ray Diffraction 100%
  • Deposited Energy 100%
  • Three Dimensional Printing 20%
  • Ultimate Tensile Strength 20%

• Short-wave infrared heating of 22MnB5 steel with adjusted surface emissivity for press hardening of tailored-strength components

  Sun, H., Yao, S., Tang, Q., Rong, R., Chu, G., Auer, P. & Domitner, J., 30 Jun 2024, In: Journal of Manufacturing Processes. 120, p. 74-85 12 p.

  Research output: Contribution to journal › Article › peer-review

  • Emissivity 100%
  • Reflectance 100%
  • Pretreatment 100%
  • High Strength Steel 100%
  • Oxidation Reaction 100%

• The effect of thermomechanical welding on the microstructure and mechanical properties of S700MC steel welds

  Wang, P., Martins Gomes, F., Warchomicka, F. G., Ernst, W., Vallant, R., Poletti, M. C. & Enzinger, N., May 2024, In: Welding in the World. 68, 5, p. 1053-1069 17 p., 10.1007/s40194-024-01711-x.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Plastic Deformation 100%
  • Mechanical Vibration 100%
  • Grain Size 66%
  • Grain Refinement 66%
  • Bainite 66%

• The electron beam freeform fabrication of NiTi shape memory alloys. Part II: Influence of the heat treatment on the superelastic behaviour

  Guimarães, R. P. M., Rauchdobler, B., Pixner, F., Mahdi, A., Ferraz, F. M. B., Poletti, C., Enzinger, N. & Amancio-Filho, S. T., Jan 2024, In: Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 238, 1, p. 100-111 12 p.

  Research output: Contribution to journal › Article › peer-review

  • Heat Treatment 100%
  • Shape Memory Alloy 100%
  • Multilayer 100%
  • Shape Memory Effect 100%
  • Deposited Material 50%

• The Influence of Thermomechanical Conditions on the Hot Ductility of Continuously Cast Microalloyed Steels

  Sharifi, S. S., Bakhtiari, S., Shahryari, E., Sommitsch, C. & Poletti, M. C., 16 Sept 2024, In: Materials. 17, 18, 4551.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Dynamic Recrystallization 100%
  • Microalloyed Steel 100%
  • Austenite 100%
  • Continuous Casting 100%
  • Strain Rate 100%

• Thermal cycling effects on the local microstructure and mechanical properties in wire-based directed energy deposition of nickel-based superalloy

  Pixner, F., Warchomicka, F. G., Lipińska, M., Elmiger, S., Jechtl, C., Auer, P., Riedlsperger, F. K., Buzolin, R. H., Domitner, J., Lewandowska, M. & Enzinger, N., 5 Mar 2024, In: Additive Manufacturing. 83, 104066.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Nickel-Based Superalloys 100%
  • Thermal Cycling 100%
  • Directed Energy Deposition 100%
  • Deposition Time 100%
  • Three Dimensional Printing 50%

• Ultrafine-grained stainless steel with wear-resistant nanoborides decorating grain boundaries produced by laser powder bed fusion

  J. M. Freitas, B., Y. Koga, G., Miguel Rodrigues, L. C., Botta Filho, W. J., Amancio-Filho, S. T. & Bolfarini, C., May 2024, In: Materialia. 34, 8 p., 102079.

  Research output: Contribution to journal › Article › peer-review

  • Stainless Steel 100%
  • Grain Boundary 100%
  • Composite Material 100%
  • Wear Resistance 100%
  • Laser Powder Bed Fusion 100%

• Ultrasonic joining of carbon-reinforced polyamide with oak wood for manufacturing sustainable hybrid structures

  Awan, A., Marcatto de Oliveira, G. H., Sales de Carvalho, W., Auer, P., Domitner, J. & Amancio-Filho, S. T., Nov 2024, In: Manufacturing Letters. 42, p. 26-29 4 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Unraveling the impact of the substitution of Si by Al on liquid metal embrittlement behavior of 3^rd generation AHSS

  Wallner, M., Steineder, K., Schneider, R., Gruber, M., Arndt, M. & Sommitsch, C., May 2024, In: Materials Science and Engineering: A. 899, 146446.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Silicon 100%
  • Aluminum 100%
  • High Strength Steel 100%
  • Liquid Metal Embrittlement 100%
  • Intermetallic Compound 37%

• Wear mechanisms and failure analysis of a tool used in refill friction stir spot welding of AA6061-T6

  Fritsche, S., Schindler, F., Sales de Carvalho, W. & Amancio-Filho, S. T., 15 Jan 2025, In: Wear. 560-561, 12 p., 205610.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Welding of S1100 Ultra high-Strength Steel Plates with Matching Metal-Cored Filler Wire: Microstructure, Residual Stresses, and Mechanical Properties

  Tümer, M., Pixner, F., Vallant, R., Warchomicka, F. G., Domitner, J. & Enzinger, N., May 2024, In: Steel Research International. 95, 5, 2300675.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Residual Stress 100%
  • High Strength Steel 100%
  • Weld Metal 100%
  • Martensite 66%
  • Grain Boundary 33%

• Wet chemical surface functionalization of AA2017 powders for additive manufacturing

  Batistão, B. F., Pinotti, V. E., de Lima, M. L., de Giovanni Rodrigues, A., Amancio-Filho, S. T. & Gargarella, P., 7 Jun 2024, In: Powder Technology. 443, 119938.

  Research output: Contribution to journal › Article › peer-review

• Zirconium Oxide as a Novel Material for Post-Endodontically Treated Teeth: Comparative Fracture Behavior of 3D-Printed Cobalt–Chromium, Milled Zirconium Oxide, and Quartz Fiber Posts

  Sokolowski, A., Warchomicka, F. G., Seebacher, L., Remschmidt, B., Rieder, M., Kqiku-Biblekaj, L. & Sokolowski, A., 17 Nov 2024, In: Materials. 17, 22, 5611.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Endodontic Treatment 100%
  • Compression Load 50%

• ZnIn2S4 thin films with hierarchical porosity for photocatalysis

  Sigl, M., Egger, M. S., Warchomicka, F. G., Knez, D., Dienstleder, M., Amenitsch, H., Trimmel, G. & Rath, T., 26 Sept 2024, In: Journal of Materials Chemistry A. 12, 42, p. 28965-28974 10 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Thin Films 100%
  • Film 100%
  • Photocatalysts 100%
  • Hierarchical Porosity 100%
  • Photocatalysis 100%
• 2023

  3D Welding. Additive Fabrication of Structural Steel Elements

  Holzinger, C., Trummer, A., Peters, S., Humer, W., Trummer, A., Freytag, B., Funke-Kaiser, D., Enzinger, N., Sharifi, S. S. & Fritsche, S., 2023, In: GAM - Graz Architecture Magazine. p. 183 1 p.

  Research output: Contribution to journal › Article

• Additive manufacturing of metal-polymer hybrid parts: the influence of as-printed LPBF surface roughness on the joint strength

  Belei, C., Effertz, P. S., Meier, B. & Amancio-Filho, S. T., 26 May 2023, In: Frontiers in Materials. 10, 1202281.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Additive Manufacturing 100%
  • Joint Strength 100%
  • Inclination Angle 100%
  • Powder Bed Fusion 100%
  • Three Dimensional Printing 100%

• Application of electron beam welding technique for joining coarse-grained and ultrafine-grained plates from Al-Mg-Si alloy

  Lipińska, M., Pixner, F., Szachogłuchowicz, I., Mittermayr, F., Grengg, C., Enzinger, N. & Lewandowska, M., 27 Oct 2023, In: Journal of Manufacturing Processes. 104, p. 28-43 16 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Silicon Alloys 100%
  • Alloying 33%
  • Grain Size 33%
  • Strength of Materials 33%

• Critical verification of the effective diffusion concept

  Drexler, A., Galler, M., Elsayed, H., Vallant, R. & Sommitsch, C., 4 Feb 2023, In: International Journal of Hydrogen Energy. 48, 20, p. 7499-7514 16 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Diffusivity 100%
  • Surface (Surface Science) 50%
  • Materials Property 16%
  • Finite Difference Method 16%
  • Ferritic Steel 16%

• Effect of 316L Stainless Steel Fabrication on Oxidation Resistance, Surface Morphology, and Hot Tensile Behavior

  Dudziak, T., Buzolin, R., Rzad, E., Wójcicki, M., Kateusz, F., Arneitz, S. & Polkowska, A., Nov 2023, In: Journal of Materials Engineering and Performance. 32, 22, p. 10443-10454 12 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Stainless Steel 100%
  • Strain Rate 100%
  • Tensile Loads 100%
  • Surface Morphology 100%
  • Oxidation Resistance 100%

• Effect of Tensile Loading and Temperature on the Hydrogen Solubility of Steels at High Gas Pressure

  Drexler, A., Konert, F., Nietzke, J., Hodzic, E., Pastore, S., Domitner, J., Rhode, M., Sommitsch, C. & Böllinghaus, T., 2023, In: Steel Research International. 95, 2300493.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Ultimate Tensile Strength 100%
  • Hydrogen Solubility 100%
  • Martensitic Stainless Steel 50%
  • Ferritic Stainless Steel 50%
  • Liquid Hydrogen 16%