Find Research Outputs

Search results

• 2023

  Improving the Flavor Profile of Apple Spirits Using Traditional Cultivars

  Spaho, N., Gaši, F., Leitner, E., Akagić, A., Blesić, M. & Meland, M., 17 Mar 2023, In: ACS Food Science and Technology. 3, 3, p. 414-427 14 p.

  Research output: Contribution to journal › Article › peer-review

• In-Air Microfluidic Strategy for the Production of Sodium Alginate Fibers with Regular Inclusions at Very High Throughput

  Marangon, F., Baumgartner, D. & Planchette, C., 2 May 2023, In: Physical Review Applied. 19, 15 p., 054006.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Incident management in long railway tunnels, taking the Koralm tunnel as an example

  Bacher, M., Steiner, H., Fruhwirt, D. & Sturm, P-J., 2 May 2023, Proceedings from the Tenth International Symposium on Tunnel Safety and Security. Borås, Sweden: RISE Research Institutes of Sweden AB, p. 427-438

  Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review

• Incident management in long railway tunnels, taking the Koramltunnel as an example

  Bacher, M., Fruhwirt, D., Sturm, P-J. & Steiner, H., 27 Apr 2023, Proceedings of the 10th International Symposium on Tunnel Safety and Security.

  Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review

• In-cylinder pressure reconstruction from engine block vibrations via a branched convolutional neural network

  Ofner, A. B., Kefalas, A., Posch, S., Pirker, G. & Geiger, B. C., 15 Jan 2023, In: Mechanical Systems and Signal Processing. 183, 109640.

  Research output: Contribution to journal › Article › peer-review

• Industrial Production of Proteins with Pichia pastoris—Komagataella phaffii

  Barone, G. D., Emmerstorfer-Augustin, A., Biundo, A., Pisano, I., Coccetti, P., Mapelli, V. & Camattari, A., Mar 2023, In: Biomolecules. 13, 3, 441.

  Research output: Contribution to journal › Review article › peer-review

  Open Access

• Influence of alloy composition and lubrication on the formability of Al-Mg-Si alloy blanks

  Hodzic, E., Domitner, J., Thum, A., Shafiee Sabet, A., Müllner, N., Fragner, W. & Sommitsch, C., 6 Jan 2023, In: Journal of Manufacturing Processes. 85, p. 109-121 13 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Influence of Cell Selection and Orientation within the Traction Battery on the Crash Safety of Electric-Powered Two-Wheelers

  Sevarin, A., Fasching, M., Raffler, M. & Ellersdorfer, C., Apr 2023, In: Batteries. 9, 4, 195.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Influence of hydrogen combustion on engine components in full load operation

  Trabold, C., Puck, A., Gallas, T., Grabner, P. & Gschiel, K., 22 Feb 2023. 13 p.

  Research output: Contribution to conference › Paper

• Influence of microstructure on degradation of cast graphitic high-speed steel

  Aigner, M., Pellizzari, M., Domitner, J., Elizondo, L., Fischbacher, M., Laubichler, I., Paar, A., Reiter, M., Trickl, T. & Sommitsch, C., 1 Jun 2023, In: Wear. 522, 12 p., 204702.

  Research output: Contribution to journal › Article › peer-review

• Influence of natural aging on the formability of Al-Mg-Si alloy blanks

  Hodzic, E., Domitner, J., Thum, A., Shafiee Sabet, A., Müllner, N., Fragner, W. & Sommitsch, C., 2023, In: Journal of Manufacturing Processes. 94, p. 228-239 12 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Influence of Oxygen on the Kinetics of Omega and Alpha Phase Formation in Beta Ti–V

  Enzinger, R. J., Luckabauer, M., Okamato, N. L., Ichitsubo, T., Sprengel, W. & Würschum, R., Feb 2023, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 54, 2, p. 473-486 14 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Influence of PLGA End Groups on the Release Profile of Dexamethasone from Ocular Implants

  Saraf, I., Kushwah, V., Alva, C., Koutsamanis, I., Rattenberger, J., Schroettner, H., Mayrhofer, C., Modhave, D., Braun, M., Werner, B., Zangger, K. & Paudel, A., 2023, In: Molecular Pharmaceutics. 20, 2, p. 1307-1322 16 p.

  Research output: Contribution to journal › Article › peer-review

• Influence of reversible swelling and preload force on the failure behavior of a lithium-ion pouch cell tested under realistic boundary conditions

  Höschele, P., Heindl, S. F., Erker, S. & Ellersdorfer, C., 15 Aug 2023, In: Journal of Energy Storage. 65, p. 107228 107228.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Influence of the electrocatalyst layer thickness on alkaline DEFC performance

  Roschger, M., Wolf, S., Mayer, K., Billiani, A., Genorio, B., Gorgieva, S. & Hacker, V., 27 Jan 2023, In: Sustainable Energy & Fuels. 7, 4, p. 1093-1106 14 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Influence of thermomechanical treatments on the microstructure and mechanical properties of AISI 304L welds

  Wang, P., Szalowski, B., Vallant, R., Poletti, M. C. & Enzinger, N., 2023, In: Welding International. 37, 2, p. 79-90 12 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Information Bounds and Convergence Rates for Side-Channel Security Evaluators

  Masure, L., Cassiers, G., Hendrickx, J. & Standaert, F-X., 2023, (Accepted/In press) In: IACR Transactions on Cryptographic Hardware and Embedded Systems.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Injection overmolding of polymer-metal hybrid structures: A review

  L. Vasconcelos, R., M. Oliveira, G. H., Amancio-Filho, S. T. & Canto, L. B., Mar 2023, In: Polymer Engineering and Science. 63, 3, p. 691-722 32 p.

  Research output: Contribution to journal › Review article › peer-review

  Open Access

• In orbit calibration of the non-orthogonality of the two fluxgate sensors onboard CSES

  Tong, Y., Zhou, B., Li, L., Cheng, B., Zhang, Y., Magnes, W., Lammegger, R., Pollinger, A., Yang, Y., Zeren, Z. & Shen, X., 2023, In: Earth, Planets and Space. 75, 1, 21.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• InSARTrac Field Tests—Combining Computer Vision and Terrestrial InSAR for 3D Displacement Monitoring

  Zambanini, C., Reinprecht, V. & Kieffer, D. S., Apr 2023, In: Remote Sensing. 15, 8, 2031.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• In-situ consolidation of additively manufactured continuous fiber reinforced material: Technical approach and results

  Oberlercher, H., Laux, M., Heim, R., Berndt, A., Amancio-Filho, S. T. & Riemelmoser, F. O., 19 Apr 2023, Material Forming: Materials Research Forum LLC. Vol. 28. p. 85-92 8 p. 10. (Materials Research Proceedings ; vol. 28).

  Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review

  Open Access

• In-Situ Virtual Reality Tour using a real-time 360° Video Stream

  Fussi, S., 9 May 2023, (Submitted) 24 p.

  Research output: Thesis › Bachelor's Thesis

• Integrated Power and Economic Analysis of Austria’s Renewable Electricity Transformation

  Gaugl, R., Sommer, M., Kettner, C., Bachhiesl, U., Klatzer, T. F., Gruber, L., Böheim, M., Kratena, K. & Wogrin, S., Mar 2023, In: Energies. 16, 5, 2229.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Integrating GPU-Accelerated Tetrahedral Mesh Editing and Simulation

  Ströter, D., Halm, A., Krispel, U., Mueller-Roemer, J. S. & Fellner, D. W., 2023, Simulation and Modeling Methodologies, Technologies and Applications - International Online Conference SIMULTECH 2021. Wagner, G., Werner, F., Oren, T. & De Rango, F. (eds.). Springer Science and Business Media Deutschland GmbH, p. 24-42 19 p. (Lecture Notes in Networks and Systems; vol. 601 LNNS).

  Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review

• Intelligent User Interface for Decision Support in Drug Development

  Manteghi, R. & Veas, E. E., 27 Mar 2023, IUI 2023 - Companion Proceedings of the 28th International Conference on Intelligent User Interfaces. Association of Computing Machinery, p. 214-219 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review

  Open Access

• Interdecadal glacier inventories in the Karakoram since the 1990s

  Xie, F., Liu, S., Gao, Y., Zhu, Y., Bolch, T., Kääb, A., Duan, S., Miao, W., Kang, J., Zhang, Y., Pan, X., Qin, C., Wu, K., Qi, M., Zhang, X., Yi, Y., Han, F., Yao, X., Liu, Q., Wang, X., & 7 othersJiang, Z., Shangguan, D., ZHANG, Y., Grünwald, R., Adnan, M., Karki, J. & Saifullah, M., 16 Feb 2023, In: Earth System Science Data. 15, 2, p. 847-867 21 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Interfacial tension and phase equilibria for binary systems containing (CH₄-CO₂)+(n-dodecane; n-butanol; water)

  Villablanca-Ahues, R., Nagl, R., Zeiner, T. & Jaeger, P., Jul 2023, In: Fluid Phase Equilibria. 570, 113783.

  Research output: Contribution to journal › Article › peer-review

• Interplay of electrolyte concentration and molecular weight of polyDADMAC on cellulose surface adsorption

  Sampl, C., Schaubeder, J., Hirn, U. & Spirk, S., 1 Jun 2023, In: International Journal of Biological Macromolecules. 239, 124286.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Inven!RA Architecture for Sustainable Deployment of Immersive Learning Environments

  Morgado, L., Coelho, A., Beck, D., Gütl, C., Cassola, F., Baptista, R., van Zeller, M., Pedrosa, D., Cruzeiro, T., Cota, D., Grilo, R. & Schlemmer, E., 3 Jan 2023, In: Sustainability. 15, 1, 857.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Investigating vibroacoustic sound emission of a clinically applied knee prosthesis

  Wurzinger, A., Mayr-Mittermüller, B., Sima, H., Kaltenbacher, M. & Schoder, S., 2023, (Accepted/In press).

  Research output: Contribution to conference › Abstract

• Investigating vibroacoustic sound emission of a clinically applied knee prosthesis

  Wurzinger, A., Mayr-Mittermüller, B., Sima, H., Kaltenbacher, M. & Schoder, S., 2023, (In preparation) Investigating vibroacoustic sound emission of a clinically applied knee prosthesis.

  Research output: Chapter in Book/Report/Conference proceeding › Conference paper

• Investigation of recrystallization processes in aluminum alloys - in situ electron backscatter diffraction optimized for annealing at constant heating rates

  Theissing, M., Falkinger, G. & Mitsche, S., 2023, p. 60.

  Research output: Contribution to conference › Poster

  File

• Investigation of recrystallization processes in aluminum alloys - in situ electron backscatter diffraction optimized for annealing at constant heating rates

  Theissing, M., Falkinger, G. & Mitsche, S., 2023, Workshop on Advanced Electron Microscopy. p. 60

  Research output: Chapter in Book/Report/Conference proceeding › Conference paper

• Investigation of the Heat Storage Capacity and Storage Dynamics of a Novel Polymeric Macro-Encapsulated Core-Shell Particle Using a Paraffinic Core

  Singer, M., Fischlschweiger, M. & Zeiner, T., Jan 2023, In: Energies. 16, 2, 957.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Isolation of Carboxylic Acids and NaOH from Kraft Black Liquor with a Membrane-Based Process Sequence

  Maitz, S. M., Wernsperger, L. & Kienberger, M., 10 Jan 2023, In: Membranes . 13, 1, 92.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Isoperimetric Inequalities and Supercritical Percolation on High-dimensional Product Graphs

  Erde, J., Kang, M., Krivelevich, M. & Diskin, S., 2023, 34 p.

  Research output: Working paper

• Is soft rock also non-abrasive rock? An evaluation from lab testing campaigns

  Kaspar, M., Latal, C., Blümel, M. & Pittino, G., 2023, In: IOP Conference Series: Earth and Environmental Science. 1124, 1, p. 1-9 9 p., 012019.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Kavach: Lightweight masking techniques for polynomial arithmetic in lattice-based cryptography

  Aikata, A., Basso, A., Cassiers, G., Mert, A. C. & Sinha Roy, S., 2023, (Accepted/In press) In: IACR Transactions on Cryptographic Hardware and Embedded Systems. 2023, 3, 25 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

• KI als Triebkraft zur Energieoptimierung und Schadstoffreduktion: Wirtschaftliche Implikationen, Anwendungsbeispiele und Implementierungshürden

  Benabed, A. & Grünbichler, R., Mar 2023, In: BÖB-Journal. 2023, 93, p. 82-86 5 p.

  Research output: Contribution to journal › Article

• Kontrollierte Versuchsplanung für die strömungsakustische Charakterisierung von Radialventilatoren

  Czwielong, F., Uffinger, T., Schoder, S., Heidegger, P., Kaltenbacher, M. & Becker, S., 2023, Fortschritte der Akustik - 2023.

  Research output: Chapter in Book/Report/Conference proceeding › Conference paper

• Konzepte zur Nutzung von Knowledge-based Engineering in der Planung intralogistischer Stetigförderersysteme: Prototypische Umsetzung

  Ortner-Pichler, A. & Landschützer, C., 9 May 2023, Logistikwerkstatt Graz 2023 (Tagungsband). Landschützer, C. (ed.). p. 279-286 8 p. (Logistik Werkstatt Graz).

  Research output: Chapter in Book/Report/Conference proceeding › Conference paper

  Open Access

• Kostenrechnung: Einführung - Methodik - Anwendungsfälle

  Zunk, B. M., Grbenic, S. O., Baumüller, J. & Bauer, U., 2023, 5., erw. ed. LexisNexis Verlag ARD Orac GmbH & Co KG. 354 p.

  Research output: Book/Report › Book

• Kumpitz in progress: Werkgenese, Rezeption und mediale Transformation des Hödlmosers im Spiegel des Vorlasses von Reinhard P. Gruber

  Milkovits, D., 2023, (In preparation)

  Research output: Thesis › Master's Thesis

• Large deviation principles for lacunary sums

  Aistleitner, C., Gantert, N., Kabluchko, Z., Prochno, J. & Ramanan, K., 1 Jan 2023, In: Transactions of the American Mathematical Society. 376, 1, p. 507-553 47 p.

  Research output: Contribution to journal › Article › peer-review

• Laser-powder bed fusion process optimisation of AlSi10Mg using extra trees regression

  Minkowitz, L., Arneitz, S., Amancio-Filho, S. T. & Effertz, P., Mar 2023, In: Materials & Design. 227, 21 p., 111718.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Layered Binary Templating

  Schwarzl, M., Kraft, E. & Gruss, D., 2023, (Submitted) 21st International Conference on Applied Cryptography and Network Security: ACNS 2023. 27 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review

  File

• Learning Analytics in Hochschulen und Künstliche Intelligenz: Eine Übersicht über Einsatzmöglichkeiten, erste Erfahrungen und Entwicklungen von KI-Anwendungen zur Unterstützung des Lernens und Lehrens.

  Schön, S., Leitner, P., Lindner, J. & Ebner, M., 3 Mar 2023, Künstliche Intelligenz in der Hochschulbildung: Chancen und Grenzen des KI-gestützten Lernens und Lehrens. Schmohl, T., Watanabe, A. & Schelling, K. (eds.). Bielefeld: transcript Verlag, p. 27-49

  Research output: Chapter in Book/Report/Conference proceeding › Chapter › peer-review

  Open Access

• Learning Analytics – Studierende im Fokus

  Bartok, L., Donner, M-T., Ebner, M., Gosch, N., Handle-Pfeiffer, D., Hummel, S., Kriegler-Kastelic, G., Leitner, P., Tang, T., Veljanova, H., Winter, C. & Zwiauer, C., 30 Apr 2023, In: Zeitschrift für Hochschulentwicklung . 18, p. 223-250

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Learning Mealy machines with one timer

  Vaandrager, F., Ebrahimi, M. & Bloem, R., 20 Feb 2023, (E-pub ahead of print) In: Information and Computation. 21 p., 105013.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Load-bearing capacity of hybrid riv-bonded aluminum-magnesium joints at quasi-static and cyclic loadings

  Domitner, J., Silvayeh, Z., Predan, J., Auer, P., Stippich, J., Enzinger, N. & Gubeljak, N., 3 Feb 2023, In: Journal of Manufacturing Processes. 87, p. 133-140 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access