An Integrated Real-time Monitoring and Statistical Process Control Approach for Coating Process and Product Quality via In-line Optical Coherence Tomography

Stephan Sacher*, Elisabeth Fink, Vanessa Herndler, Willibald Stumptner, Anna Peter, Manuel Zettl, Maxwell Korang-Yeboah, Xin Feng, Huiquan Wu, Johannes G. Khinast

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

Abstract

Purpose: The thickness and other quality aspects of pharmaceutical coatings can be significantly impacted by coating process conditions. Under certain circumstances, they can notably influence the drug product performance such as dissolution profiles. Typically, a target coating thickness range is defined in the coating process. The coating thickness is conventionally measured off-line via weight or diameter gain. However, these established methods do not allow real-time monitoring of the product quality during the coating process. Further, options to react to any deviations are limited due to the lack of real-time information on the actual process and product state. The focus of this study was the development of a data-driven approach for real-time process control. Methods: Optical coherence tomography (OCT) is a novel technique for in-line monitoring of pharmaceutical coating processes, which acquires coherent and accurate data on coating thickness and other quality attributes in real-time. Using the quality by design (QbD) principles, this study developed and implemented an integrated approach for tracking the process and the coating layer quality in real-time. Data on coating thickness and roughness were compared with data obtained from optimal process conditions. Results: The integrated real-time process monitoring and control approach was executed and tested in a laboratory scale pan coating process. Coating runs with standard conditions and with intentional process upsets were performed. Using the real-time process trajectory to actively control the coating process, the dissolution profiles of the coated tablets produced in the event runs matched the optimal profiles well. Conclusion: Tracking the coating process trajectory via OCT is a novel method for controlling the coating process and the related product quality attributes in real-time. It can help to realise full benefits of real-time control in addition to end-point determination and can support product development activities as well as the operation during commercial manufacturing.

Original languageEnglish
Pages (from-to)1870-1878
Number of pages9
JournalJournal of Pharmaceutical Innovation
Volume18
Issue number4
DOIs
Publication statusPublished - Dec 2023

Keywords

  • Coating
  • Dissolution profile
  • In-line monitoring
  • Optical coherence tomography
  • Quality control
  • Statistical process control

ASJC Scopus subject areas

  • Pharmaceutical Science
  • Drug Discovery

Cite this