Etching of polyethylene terephthalate thin films by neutral oxygen atoms in the late flowing afterglow of oxygen plasma

Alenka Vesel*, Metod Kolar, Ales Doliska, Karin Stana-Kleinschek, Miran Mozetic

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review


Films of polyethylene terephthalate were deposited on quartz crystals and exposed to oxygen atoms to study their etching characteristics and quantify the etching rate. Oxygen (O) atoms were created by passing molecular oxygen through plasma created in a microwave discharge. The discharge power was fixed at 250 W, while the pressure of oxygen was 50 Pa. Before exposure to oxygen atoms, a thin polymer film of polyethylene terephthalate (PET) was deposited uniformly over a crystal with a diameter of 12 mm. The crystal was mounted on a quartz crystal microbalance to accurately determine the thickness of the polymer film. The polymer film was exposed to O atoms in the flowing afterglow. The density of O atoms was measured with a cobalt catalytic probe mounted next to the sample and was determined to be 1.2 × 1021 m-3. Samples were treated with O atoms for different periods of up to 120 min. The thickness of the film decreased linearly with treatment time. After 90 min of treatment, a 65-nm-thick polymer film was completely removed. Therefore, the etching rate was 0.5 nm/min, so the interaction probability between an O atom and an atom in the sample was extremely low, just 1.4 × 10-6. Samples treated for different periods were investigated by atomic force microscopy and X-ray photoelectron spectroscopy to examine the etching characteristics of O atoms in the flowing afterglow.

Original languageEnglish
Pages (from-to)1565-1571
Number of pages7
JournalSurface and Interface Analysis
Issue number13
Publication statusPublished - 1 Dec 2012
Externally publishedYes


  • atomic force microscopy
  • etching
  • late afterglow
  • oxygen plasma
  • polymer
  • quartz crystal microbalance
  • X-ray photoelectron spectroscopy

ASJC Scopus subject areas

  • Chemistry(all)
  • Condensed Matter Physics
  • Surfaces and Interfaces
  • Surfaces, Coatings and Films
  • Materials Chemistry

Cite this