Grain Growth Prediction of Bead-on-Plate with Filler Wire SS316L using FEM

Muhd Faiz Mat; Yupiter H.P. Manurung; Norasiah Muhammad; Anton Ditler; Mohd Syakir Abd Ghani; Martin Leitner

doi:10.1088/1757-899X/834/1/012009

Grain Growth Prediction of Bead-on-Plate with Filler Wire SS316L using FEM

Muhd Faiz Mat, Yupiter H.P. Manurung, Norasiah Muhammad, Anton Ditler, Mohd Syakir Abd Ghani, Martin Leitner

Research output: Contribution to journal › Conference article › peer-review

Abstract

This fundamental investigation presents the study on the grain growth prediction for bead-on-plate of stainless steel SS316L. At first, the numerical model is developed by using basic equation with ordinary differential equation for calculating the grain growth with the presence of growing precipitates. The modified kinetic constant (Mo*) is defined based on experimental investigation using quench and deformation dilatometer for peak temperature of 1200°C and holding time of 30 seconds. The FEM simulation is conducted based on temperature dependant materials properties using MSC Marc/Mentat. As the outcome various temperature ranges for calculating the grain growth are presented. These results are to be used for further investigation using experimental bead-on-plate.

Original language	English
Article number	012009
Journal	IOP Conference Series: Materials Science and Engineering
Volume	834
Issue number	1
DOIs	https://doi.org/10.1088/1757-899X/834/1/012009
Publication status	Published - 2020
Externally published	Yes
Event	6th International Conference on Advances in Mechanical Engineering - Sabah, Malaysia Duration: 14 Aug 2019 → 16 Aug 2019

ASJC Scopus subject areas

Engineering(all)
Materials Science(all)

Access to Document

10.1088/1757-899X/834/1/012009Licence: CC BY 4.0

Cite this

@article{6036859f88444882a364c2f300863dbb,

title = "Grain Growth Prediction of Bead-on-Plate with Filler Wire SS316L using FEM",

abstract = "This fundamental investigation presents the study on the grain growth prediction for bead-on-plate of stainless steel SS316L. At first, the numerical model is developed by using basic equation with ordinary differential equation for calculating the grain growth with the presence of growing precipitates. The modified kinetic constant (Mo*) is defined based on experimental investigation using quench and deformation dilatometer for peak temperature of 1200°C and holding time of 30 seconds. The FEM simulation is conducted based on temperature dependant materials properties using MSC Marc/Mentat. As the outcome various temperature ranges for calculating the grain growth are presented. These results are to be used for further investigation using experimental bead-on-plate.",

author = "{Faiz Mat}, Muhd and Manurung, {Yupiter H.P.} and Norasiah Muhammad and Anton Ditler and {Syakir Abd Ghani}, Mohd and Martin Leitner",

year = "2020",

doi = "10.1088/1757-899X/834/1/012009",

language = "English",

volume = "834",

journal = "IOP Conference Series: Materials Science and Engineering",

issn = "1757-8981",

publisher = "Institute of Physics Publ.",

number = "1",

note = "6th International Conference on Advances in Mechanical Engineering , ICAME 2019 ; Conference date: 14-08-2019 Through 16-08-2019",

}

TY - JOUR

T1 - Grain Growth Prediction of Bead-on-Plate with Filler Wire SS316L using FEM

AU - Faiz Mat, Muhd

AU - Manurung, Yupiter H.P.

AU - Muhammad, Norasiah

AU - Ditler, Anton

AU - Syakir Abd Ghani, Mohd

AU - Leitner, Martin

PY - 2020

Y1 - 2020

N2 - This fundamental investigation presents the study on the grain growth prediction for bead-on-plate of stainless steel SS316L. At first, the numerical model is developed by using basic equation with ordinary differential equation for calculating the grain growth with the presence of growing precipitates. The modified kinetic constant (Mo*) is defined based on experimental investigation using quench and deformation dilatometer for peak temperature of 1200°C and holding time of 30 seconds. The FEM simulation is conducted based on temperature dependant materials properties using MSC Marc/Mentat. As the outcome various temperature ranges for calculating the grain growth are presented. These results are to be used for further investigation using experimental bead-on-plate.

AB - This fundamental investigation presents the study on the grain growth prediction for bead-on-plate of stainless steel SS316L. At first, the numerical model is developed by using basic equation with ordinary differential equation for calculating the grain growth with the presence of growing precipitates. The modified kinetic constant (Mo*) is defined based on experimental investigation using quench and deformation dilatometer for peak temperature of 1200°C and holding time of 30 seconds. The FEM simulation is conducted based on temperature dependant materials properties using MSC Marc/Mentat. As the outcome various temperature ranges for calculating the grain growth are presented. These results are to be used for further investigation using experimental bead-on-plate.

UR - http://www.scopus.com/inward/record.url?scp=85087511067&partnerID=8YFLogxK

U2 - 10.1088/1757-899X/834/1/012009

DO - 10.1088/1757-899X/834/1/012009

M3 - Conference article

SN - 1757-8981

VL - 834

JO - IOP Conference Series: Materials Science and Engineering

JF - IOP Conference Series: Materials Science and Engineering

IS - 1

M1 - 012009

T2 - 6th International Conference on Advances in Mechanical Engineering

Y2 - 14 August 2019 through 16 August 2019

ER -

Grain Growth Prediction of Bead-on-Plate with Filler Wire SS316L using FEM

Abstract

ASJC Scopus subject areas

Access to Document

Other files and links

Cite this