Stability of a Melt Pool during 3D-Printing of an Unsupported Steel Component and Its Influence on Roughness

Mateusz Skalon, Benjamin Meier, Andreas Gruberbauer, S. T. Amancio-Filho, Christof Sommitsch

Research output: Contribution to journalArticlepeer-review

Abstract

The following work presents the results of an investigation of the cause–effect relationship between the stability of a melt pool and the roughness of an inclined, unsupported steel surface that was 3D-printed using the laser powder bed fusion (PBF-L/M) process. In order to observe the balling effect and decrease in surface quality, the samples were printed with no supporting structures placed on the downskin. The stability of the melt pool was investigated as a function of both the inclination angle and along the length of the melt pool. Single-track cross-sections were described by shape parameters and were compared and used to calculate the forces acting on the melt pool as the downskin was printed. The single-melt track tests were printed to produce a series of samples with increasing inclination angles with respect to the baseplate. The increasing angles enabled us to physically simulate specific solidification conditions during the sample printing process. As the inclination angle of the unsupported surface increased, the melt-pool altered in terms of its size, geometry, contact angles, and maximum length of stability. The balling phenomenon was observed,
quantified, and compared using roughness tests; it was influenced by the melt track stability according to its geometry. The research results show that a higher linear energy input may decrease the roughness of unsupported surfaces with low inclination angles, while a lower linear energy input may be more effective with higher inclination angles.
Original languageEnglish
Article number808
Number of pages14
JournalMaterials
Volume13
Issue number3
DOIs
Publication statusPublished - 1 Feb 2020

Keywords

  • Additive Fertigung
  • Additive manufacturing
  • Steel
  • laser
  • Selective Laser Melting
  • Modelling
  • Laser powder bed fusion
  • Printing angle
  • Stability
  • Downskin
  • Roughness
  • Melt pool

ASJC Scopus subject areas

  • Materials Science(all)

Fields of Expertise

  • Advanced Materials Science

Fingerprint

Dive into the research topics of 'Stability of a Melt Pool during 3D-Printing of an Unsupported Steel Component and Its Influence on Roughness'. Together they form a unique fingerprint.

Cite this