Survey on the generation of equivalent circuit cable models for transient simulation

Martin Ibel; Herbert Hackl; Bernhard Auinger; Christian Stockreiter; Bernd Deutschmann

doi:10.23919/MIPRO.2019.8757048

Survey on the generation of equivalent circuit cable models for transient simulation

Martin Ibel, Herbert Hackl, Bernhard Auinger, Christian Stockreiter, Bernd Deutschmann

Silicon Austria Labs GmbH (98646)

Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review

Abstract

Especially in automotive and aerospace applications very long and complex cable harnesses are part of virtually all electronic systems. To precisely predict their electromagnetic behavior by simulation, accurate models of cables and harnesses are essential. In this work a semi-automatic workflow to derive a lumped circuit transmission line (LCTL) model from the 2D cross section of an arbitrary cable harness is presented. In contrast to conventional measurement based behavioral models (e.g. S-parameters) this approach provides flexibility to depict different harness compositions without the need for repeating measurements. The model generation process and involved limitations are discussed in detail. For validation, the simulation results obtained with the LCTL model are compared to measurements, 3D finite element method (FEM) and 3D hybrid multi transmission line (MTL) simulation in frequency and time domain. The considered frequency range is up to 1 GHz.

Original language	English
Title of host publication	2019 42nd International Convention on Information and Communication Technology, Electronics and Microelectronics, MIPRO 2019 - Proceedings
Editors	Karolj Skala, Zeljka Car, Predrag Pale, Darko Huljenic, Matej Janjic, Marko Koricic, Vlado Sruk, Slobodan Ribaric, Tihana Galinac Grbac, Zeljko Butkovic, Marina Cicin-Sain, Dejan Skvorc, Mladen Mauher, Snjezana Babic, Stjepan Gros, Boris Vrdoljak, Edvard Tijan
Publisher	Institute of Electrical and Electronics Engineers
Pages	102-107
Number of pages	6
ISBN (Electronic)	9789532330984
DOIs	https://doi.org/10.23919/MIPRO.2019.8757048
Publication status	Published - 1 May 2019
Event	42nd International Convention on Information and Communication Technology, Electronics and Microelectronics: MIPRO 2019 - Opatija, Croatia Duration: 20 May 2019 → 24 May 2019

Publication series

Name	2019 42nd International Convention on Information and Communication Technology, Electronics and Microelectronics, MIPRO 2019 - Proceedings

Conference

Conference	42nd International Convention on Information and Communication Technology, Electronics and Microelectronics
Country/Territory	Croatia
City	Opatija
Period	20/05/19 → 24/05/19

Keywords

3D EM simulation
Cable harness
Equivalent circuit
Finite element method (FEM)
Lumped circuit transmission line (LCTL)
Multi transmission line (MTL)
Per-unit-length parameters (p.u.l.)

ASJC Scopus subject areas

Computer Networks and Communications
Hardware and Architecture
Information Systems
Energy Engineering and Power Technology
Electrical and Electronic Engineering
Electronic, Optical and Magnetic Materials

Access to Document

10.23919/MIPRO.2019.8757048

Cite this

Ibel, M., Hackl, H., Auinger, B., Stockreiter, C., & Deutschmann, B. (2019). Survey on the generation of equivalent circuit cable models for transient simulation. In K. Skala, Z. Car, P. Pale, D. Huljenic, M. Janjic, M. Koricic, V. Sruk, S. Ribaric, T. G. Grbac, Z. Butkovic, M. Cicin-Sain, D. Skvorc, M. Mauher, S. Babic, S. Gros, B. Vrdoljak, & E. Tijan (Eds.), 2019 42nd International Convention on Information and Communication Technology, Electronics and Microelectronics, MIPRO 2019 - Proceedings (pp. 102-107). Article 8757048 (2019 42nd International Convention on Information and Communication Technology, Electronics and Microelectronics, MIPRO 2019 - Proceedings). Institute of Electrical and Electronics Engineers. https://doi.org/10.23919/MIPRO.2019.8757048

Survey on the generation of equivalent circuit cable models for transient simulation. / Ibel, Martin ; Hackl, Herbert ; Auinger, Bernhard et al.
2019 42nd International Convention on Information and Communication Technology, Electronics and Microelectronics, MIPRO 2019 - Proceedings. ed. / Karolj Skala; Zeljka Car; Predrag Pale; Darko Huljenic; Matej Janjic; Marko Koricic; Vlado Sruk; Slobodan Ribaric; Tihana Galinac Grbac; Zeljko Butkovic; Marina Cicin-Sain; Dejan Skvorc; Mladen Mauher; Snjezana Babic; Stjepan Gros; Boris Vrdoljak; Edvard Tijan. Institute of Electrical and Electronics Engineers, 2019. p. 102-107 8757048 (2019 42nd International Convention on Information and Communication Technology, Electronics and Microelectronics, MIPRO 2019 - Proceedings).

Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review

Ibel, M , Hackl, H , Auinger, B, Stockreiter, C & Deutschmann, B 2019, Survey on the generation of equivalent circuit cable models for transient simulation. in K Skala, Z Car, P Pale, D Huljenic, M Janjic, M Koricic, V Sruk, S Ribaric, TG Grbac, Z Butkovic, M Cicin-Sain, D Skvorc, M Mauher, S Babic, S Gros, B Vrdoljak & E Tijan (eds), 2019 42nd International Convention on Information and Communication Technology, Electronics and Microelectronics, MIPRO 2019 - Proceedings., 8757048, 2019 42nd International Convention on Information and Communication Technology, Electronics and Microelectronics, MIPRO 2019 - Proceedings, Institute of Electrical and Electronics Engineers, pp. 102-107, 42nd International Convention on Information and Communication Technology, Electronics and Microelectronics, Opatija, Croatia, 20/05/19. https://doi.org/10.23919/MIPRO.2019.8757048

Ibel M , Hackl H , Auinger B, Stockreiter C, Deutschmann B. Survey on the generation of equivalent circuit cable models for transient simulation. In Skala K, Car Z, Pale P, Huljenic D, Janjic M, Koricic M, Sruk V, Ribaric S, Grbac TG, Butkovic Z, Cicin-Sain M, Skvorc D, Mauher M, Babic S, Gros S, Vrdoljak B, Tijan E, editors, 2019 42nd International Convention on Information and Communication Technology, Electronics and Microelectronics, MIPRO 2019 - Proceedings. Institute of Electrical and Electronics Engineers. 2019. p. 102-107. 8757048. (2019 42nd International Convention on Information and Communication Technology, Electronics and Microelectronics, MIPRO 2019 - Proceedings). doi: 10.23919/MIPRO.2019.8757048

Ibel, Martin ; Hackl, Herbert ; Auinger, Bernhard et al. / Survey on the generation of equivalent circuit cable models for transient simulation. 2019 42nd International Convention on Information and Communication Technology, Electronics and Microelectronics, MIPRO 2019 - Proceedings. editor / Karolj Skala ; Zeljka Car ; Predrag Pale ; Darko Huljenic ; Matej Janjic ; Marko Koricic ; Vlado Sruk ; Slobodan Ribaric ; Tihana Galinac Grbac ; Zeljko Butkovic ; Marina Cicin-Sain ; Dejan Skvorc ; Mladen Mauher ; Snjezana Babic ; Stjepan Gros ; Boris Vrdoljak ; Edvard Tijan. Institute of Electrical and Electronics Engineers, 2019. pp. 102-107 (2019 42nd International Convention on Information and Communication Technology, Electronics and Microelectronics, MIPRO 2019 - Proceedings).

@inproceedings{77b88e766ea54e0eb2968bd874cbb04c,

title = "Survey on the generation of equivalent circuit cable models for transient simulation",

abstract = "Especially in automotive and aerospace applications very long and complex cable harnesses are part of virtually all electronic systems. To precisely predict their electromagnetic behavior by simulation, accurate models of cables and harnesses are essential. In this work a semi-automatic workflow to derive a lumped circuit transmission line (LCTL) model from the 2D cross section of an arbitrary cable harness is presented. In contrast to conventional measurement based behavioral models (e.g. S-parameters) this approach provides flexibility to depict different harness compositions without the need for repeating measurements. The model generation process and involved limitations are discussed in detail. For validation, the simulation results obtained with the LCTL model are compared to measurements, 3D finite element method (FEM) and 3D hybrid multi transmission line (MTL) simulation in frequency and time domain. The considered frequency range is up to 1 GHz.",

keywords = "3D EM simulation, Cable harness, Equivalent circuit, Finite element method (FEM), Lumped circuit transmission line (LCTL), Multi transmission line (MTL), Per-unit-length parameters (p.u.l.)",

author = "Martin Ibel and Herbert Hackl and Bernhard Auinger and Christian Stockreiter and Bernd Deutschmann",

year = "2019",

month = may,

day = "1",

doi = "10.23919/MIPRO.2019.8757048",

language = "English",

series = "2019 42nd International Convention on Information and Communication Technology, Electronics and Microelectronics, MIPRO 2019 - Proceedings",

publisher = "Institute of Electrical and Electronics Engineers",

pages = "102--107",

editor = "Karolj Skala and Zeljka Car and Predrag Pale and Darko Huljenic and Matej Janjic and Marko Koricic and Vlado Sruk and Slobodan Ribaric and Grbac, {Tihana Galinac} and Zeljko Butkovic and Marina Cicin-Sain and Dejan Skvorc and Mladen Mauher and Snjezana Babic and Stjepan Gros and Boris Vrdoljak and Edvard Tijan",

booktitle = "2019 42nd International Convention on Information and Communication Technology, Electronics and Microelectronics, MIPRO 2019 - Proceedings",

address = "United States",

note = "42nd International Convention on Information and Communication Technology, Electronics and Microelectronics : MIPRO 2019 ; Conference date: 20-05-2019 Through 24-05-2019",

}

TY - GEN

T1 - Survey on the generation of equivalent circuit cable models for transient simulation

AU - Ibel, Martin

AU - Hackl, Herbert

AU - Auinger, Bernhard

AU - Stockreiter, Christian

AU - Deutschmann, Bernd

PY - 2019/5/1

Y1 - 2019/5/1

N2 - Especially in automotive and aerospace applications very long and complex cable harnesses are part of virtually all electronic systems. To precisely predict their electromagnetic behavior by simulation, accurate models of cables and harnesses are essential. In this work a semi-automatic workflow to derive a lumped circuit transmission line (LCTL) model from the 2D cross section of an arbitrary cable harness is presented. In contrast to conventional measurement based behavioral models (e.g. S-parameters) this approach provides flexibility to depict different harness compositions without the need for repeating measurements. The model generation process and involved limitations are discussed in detail. For validation, the simulation results obtained with the LCTL model are compared to measurements, 3D finite element method (FEM) and 3D hybrid multi transmission line (MTL) simulation in frequency and time domain. The considered frequency range is up to 1 GHz.

AB - Especially in automotive and aerospace applications very long and complex cable harnesses are part of virtually all electronic systems. To precisely predict their electromagnetic behavior by simulation, accurate models of cables and harnesses are essential. In this work a semi-automatic workflow to derive a lumped circuit transmission line (LCTL) model from the 2D cross section of an arbitrary cable harness is presented. In contrast to conventional measurement based behavioral models (e.g. S-parameters) this approach provides flexibility to depict different harness compositions without the need for repeating measurements. The model generation process and involved limitations are discussed in detail. For validation, the simulation results obtained with the LCTL model are compared to measurements, 3D finite element method (FEM) and 3D hybrid multi transmission line (MTL) simulation in frequency and time domain. The considered frequency range is up to 1 GHz.

KW - 3D EM simulation

KW - Cable harness

KW - Equivalent circuit

KW - Finite element method (FEM)

KW - Lumped circuit transmission line (LCTL)

KW - Multi transmission line (MTL)

KW - Per-unit-length parameters (p.u.l.)

UR - http://www.scopus.com/inward/record.url?scp=85070292373&partnerID=8YFLogxK

U2 - 10.23919/MIPRO.2019.8757048

DO - 10.23919/MIPRO.2019.8757048

M3 - Conference paper

T3 - 2019 42nd International Convention on Information and Communication Technology, Electronics and Microelectronics, MIPRO 2019 - Proceedings

SP - 102

EP - 107

BT - 2019 42nd International Convention on Information and Communication Technology, Electronics and Microelectronics, MIPRO 2019 - Proceedings

A2 - Skala, Karolj

A2 - Car, Zeljka

A2 - Pale, Predrag

A2 - Huljenic, Darko

A2 - Janjic, Matej

A2 - Koricic, Marko

A2 - Sruk, Vlado

A2 - Ribaric, Slobodan

A2 - Grbac, Tihana Galinac

A2 - Butkovic, Zeljko

A2 - Cicin-Sain, Marina

A2 - Skvorc, Dejan

A2 - Mauher, Mladen

A2 - Babic, Snjezana

A2 - Gros, Stjepan

A2 - Vrdoljak, Boris

A2 - Tijan, Edvard

PB - Institute of Electrical and Electronics Engineers

T2 - 42nd International Convention on Information and Communication Technology, Electronics and Microelectronics

Y2 - 20 May 2019 through 24 May 2019

ER -

Survey on the generation of equivalent circuit cable models for transient simulation

Abstract

Publication series

Conference

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this