Two-Fluid-Model-Based Full Physics Simulations of Mixing in Noncohesive Wet Fluidized Beds

Maryam Askarishahi, Mohammad Sadegh Salehi, Stefan Radl*

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review


Mixing in a noncohesive wet fluidized bed was studied using the two-fluid model (TFM) and a zero-dimensional (0D) approach. The employed TFM was extended to simulate droplet deposition on the particles, droplet evaporation, and particle drying. To quantify the bed uniformity, the variance of temperature and the particles' loss on drying (LoD) field were computed. Subsequently, our TFM simulation data is used to support the assumptions adopted in our 0D model. Specifically, the simulation results suggest the formation of two well-mixed zones: a spraying/wetting zone and a drying zone. Furthermore, it was demonstrated that the 0D model can accurately predict the gas and particle temperatures, as well as the moisture content with a maximum error of 4.3% when the following criteria are met: (i) low enough temperature and LoD variance (i.e., less than 5%); (ii) deep droplet penetration into the bed; (iii) no droplet loss.

Original languageEnglish
Pages (from-to)12323-12346
Number of pages24
JournalIndustrial and Engineering Chemistry Research
Issue number27
Publication statusPublished - 10 Jul 2019

ASJC Scopus subject areas

  • Chemistry(all)
  • Chemical Engineering(all)
  • Industrial and Manufacturing Engineering


Dive into the research topics of 'Two-Fluid-Model-Based Full Physics Simulations of Mixing in Noncohesive Wet Fluidized Beds'. Together they form a unique fingerprint.

Cite this