Publikationen pro Jahr
Publikationen pro Jahr
Publikationen
- 15 Ergebnisse
Suchergebnisse
-
2020
Assessment of hydrogen-induced cracking (HIC) susceptibility of V micro-alloyed wire rod steel with different heat treatments
Elsayed, H., Höllwarth, J., Drexler, A., Galler, M., Sonderegger, B., Vallant, R. & Sommitsch, C., 2020.Publikation: Konferenzbeitrag › Poster
Datei -
2019
Thermodynamic Precipitation Kinetic Simulation and Creep Deformation Modelling of Martensitic Steel X20 Based on Microstructural Evolution
Frank, E., Riedlsperger, F. K. (Hrsg.) & Sonderegger, B. (Hrsg.), 26 Sept. 2019.Publikation: Konferenzbeitrag › Poster
-
2017
Investigation of the non-equilibrium formation of stoichiometric precipitates in multi-componentaluminium alloys
Orthacker, A., Haberfehlner, G., Tändl, J., Poletti, M. C., Sonderegger, B. & Kothleitner, G., 2017.Publikation: Konferenzbeitrag › Poster
Datei -
2016
Combination of microstructural investigation and simulation during the heat treatment of a creep resistant 11% Cr-steel
Gsellmann, B., Halici, D., Albu, M., Beal, C. & Sonderegger, B., 1 Juni 2016.Publikation: Konferenzbeitrag › Poster › Begutachtung
-
2012
Microstructural Evolution of the Heat-affected Zone in 9%Cr Steels
Halici, D., Sonderegger, B., Mayr, P. & Reichmann, K., 2012.Publikation: Konferenzbeitrag › Poster
-
Microstructural Evolution of the Heat-affected Zone in 9%Cr Steels
Halici, D., Sonderegger, B., Mayr, P. & Reichmann, K., 2012.Publikation: Konferenzbeitrag › Poster
-
2010
Calculation of phase boundary energies and application in multicomponent steels
Sonderegger, B., Hacksteiner, M., Mendez Martin, F., Holzer, I. & Kozeschnik, E., 2010.Publikation: Konferenzbeitrag › Poster
-
Creep strength and microstructural evolution of 9-12% Cr hear resistant steels during creep exposure at 600°C and 650°C
Mendez Martin, F., Panait, C. G., Bendick, W., Albu, M., Sonderegger, B., Sommitsch, C., Gourgues-Lorenzon, A-F., Besson, J. & Fuchsmann, A., 2010.Publikation: Konferenzbeitrag › Poster
-
Transmission Electron Microscopy Investigations of a 12 wt.% Martensitic Cr Steel Designed for High Temperature Service
Mendez Martin, F., Albu, M., Sonderegger, B., Mayr, P. & Sommitsch, C., 2010.Publikation: Konferenzbeitrag › Poster
-
2009
Microstructure evaluation of 12% Cr steel using TEM technique
Mendez Martin, F., Albu, M., Sonderegger, B. & Sommitsch, C., 2009.Publikation: Konferenzbeitrag › Poster
-
2006
EFTEM investigations on precipitates in a creep resistant 9-12% Cr stel
Sonderegger, B., Kothleitner, G., Rechberger, W. & Cerjak, H-H., 2006.Publikation: Konferenzbeitrag › Poster
-
Microstructural analysis on a creep resistant martensitic 9-12% Cr steel using the EBSD method
Sonderegger, B., Mitsche, S. & Cerjak, H-H., 2006.Publikation: Konferenzbeitrag › Poster
-
Microstructural analysis on a creep resistant martensitic 9-12% Cr steel using the EBSD method
Sonderegger, B., Mitsche, S. & Cerjak, H-H., 2006.Publikation: Konferenzbeitrag › Poster
-
2004
Characterisation of the substructure of 9-12% Cr steels using combind electronmicroscopical methods
Sonderegger, B., 2004.Publikation: Konferenzbeitrag › Poster
-
Current and future activities at the IWS on the development and improvement of 9-12% Cr steels
Cerjak, H-H., Kozeschnik, E., Li, D., Mayr, P., Pein, C., Rajek, H. J. & Sonderegger, B., 2004.Publikation: Konferenzbeitrag › Poster