Impact of High-Pressure-Turbine Purge Flow on the Evolution of Turbulence in a Turbine Vane Frame

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in einem KonferenzbandBegutachtung

Abstract

This paper describes the measurement and postprocessing of turbulence data. The experiments were carried out in a two-stage two spool transonic turbine test rig at the Institute for Thermal Turbomachinery and Machine Dynamics at Graz University of Technology, which includes relevant purge and turbine rotor tip leakage flows. The test setup consists of a high-pressure turbine (HPT) stage, a turbine vane frame (TVF) with turning struts and splitters and a counter-rotating low-pressure turbine (LPT) to allow engine realistic measurements. Time-resolved area traverse measurements have been performed for three different operating conditions in three measurement planes downstream of the HPT rotor, which enable the measurement of the turbulence quantities at the TVF inlet and outlet as well as LPT outlet. The turbulence quantities are evaluated using triaxial- and single hot-film probes by means of Constant-Temperature-Anemometry, and their results were validated with Five-Hole Probe (FHP) measurements. Ensemble- and time-averaging as well as Fourier transforms, were applied for data reduction. It is shown how the turbulence intensity and integral length scale vary over different purge flow rates (PFR). The acquired measurement data illustrates that the interaction of the ejected purge flow with mean flow enhances the turbulent mixing in the secondary flow structures at the TVF inlet and TVF outlet, respectively. Furthermore, the flow downstream of the LPT rotor is affected by TVF and LPT rotor secondary flow structures, which are identified as high turbulence regions. These regions strongly depend on the purge flow rate. These results acquired under engine realistic rigs flow conditions enable a deeper understanding of the relationship between loss and turbulence quantities and will help improve the application of CFD turbulence models to turbomachinery modeling.

Originalspracheenglisch
TitelTurbomachinery - Multidisciplinary Design Approaches, Optimization, and Uncertainty Quantification; Radial Turbomachinery Aerodynamics; Unsteady Flows in Turbomachinery
Herausgeber (Verlag)American Society of Mechanical Engineers (ASME)
Seitenumfang14
ISBN (elektronisch)9780791887110
DOIs
PublikationsstatusVeröffentlicht - 2023
VeranstaltungASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition: GT 2023 - Boston, USA / Vereinigte Staaten
Dauer: 26 Juni 202330 Juni 2023

Publikationsreihe

NameProceedings of the ASME Turbo Expo
Band13D

Konferenz

KonferenzASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition
KurztitelGT 2023
Land/GebietUSA / Vereinigte Staaten
OrtBoston
Zeitraum26/06/2330/06/23

ASJC Scopus subject areas

  • Allgemeiner Maschinenbau

Fingerprint

Untersuchen Sie die Forschungsthemen von „Impact of High-Pressure-Turbine Purge Flow on the Evolution of Turbulence in a Turbine Vane Frame“. Zusammen bilden sie einen einzigartigen Fingerprint.

Dieses zitieren