Projekte pro Jahr
A double wishbone axle setup including fixed calliper brake system has been investigated at a vehicle corner test rig. Machine and facility enable reproducible test matrix combinations of brake pressure and drum velocity under defined environmental conditions. The conducted ODS methods rest on two accelerometer allocations. One sensor arrangement was focussed on axle and suspension components, the other one on brake parts. In addition, the disk rotation has been captured in a fine incremental resolution. In order to realise a mechanical sensitivity study, two alternative upper control arm types were tested in terms of creep groan.
A large number of the test matrix combinations give birth to brake creep groan phenomena. The manifested stick slip cycles are within typical fundamental frequency spans below 25 Hz and from 60 to 100 Hz. The upper control arm rubber bushings have an impact on the higher stick slip frequency which shifts approximately 30 Hz here. The lower control arm bushings rather affect the bottom stick slip frequency span instead. Exemplary ODS visualisations reveal specific non linear component movements in dependence of current operational parameters. Thus, influences of local elasticities and/or subsystem resonance effects can be identified and global phases of stick or slip can be deduced.
The study considers sustained creep groan. Triggering events as well as charging periods, which may also be of interest, are not investigated. Furthermore, limited numbers of sensors and data acquisition channels led to two separate arrangements with restricted spatial resolutions. All solid (metal) parts are assumed to interact as rigid bodies with geometric and/or flexible joints. It is noted that stick slip of the friction pair is interpreted in a macroscopic sense here.
A former work shows time discrete ODS orbits at brake module level. The current publication includes also the axle and suspension system. Another creep groan related work treats bushing parameters in simulations. The present paper involves a real world component study instead.
This study treats experimental creep groan investigations at automobile front corner level. The customised ODS analyses reveal underlying mechanisms as well as stimulated feedback resonances in an illustrative way. All visualisations agree with the authors’ subjective hands on perceptions. Eventually, the influence of axle bushing properties is highlighted.
|Titel||Proceedings of Eurobrake 2019|
|Publikationsstatus||Veröffentlicht - 21 Mai 2019|
|Veranstaltung||EuroBrake 2019: Europe's braking technology conference & exhibition - Dresden, Deutschland|
Dauer: 21 Mai 2019 → 23 Mai 2019
|Konferenz||EuroBrake 2019: Europe's braking technology conference & exhibition|
|Zeitraum||21/05/19 → 23/05/19|
Fields of Expertise
- Mobility & Production
FingerprintUntersuchen Sie die Forschungsthemen von „ODS of Fixed Calliper Brake and Double Wishbone Axle During Creep Groan at Corner Test Rig“. Zusammen bilden sie einen einzigartigen Fingerprint.
- 1 Abgeschlossen
15_005l SimGroan - Simulation des Bremsenknarzens Erarbeitung von Anregungsmechanismen für die Simulation mit Hilfe messtechnischer Untersuchungen
1/04/15 → 30/03/18
- 1 Vortrag bei Konferenz oder Fachtagung
Manuel Pürscher (Redner/in)22 Mai 2019
Aktivität: Vortrag oder Präsentation › Vortrag bei Konferenz oder Fachtagung › Science to science