Michael Klanner

2024

Analysis of rotor-bearing systems utilising fractional derivative material damping models

Überwimmer, G., Klanner, M. & Ellermann, K., 2024, Proceedings of ISMA 2024 International Conference on Noise and Vibration Engineering and USD2024 International Conference on Uncertainty in Structural Dynamics. p. 1206-1218

Research output: Chapter in Book/Report/Conference proceeding › Conference paper

Comparing the NVH Behaviour of an Innovative SteelWood Hybrid Battery Housing Design to an All Aluminium Design

Wagner, M., Baumann, G., Lindbichler, L., Klanner, M. & Feist, F., 12 Jun 2024, In: SAE Technical Papers. 2024

Research output: Contribution to journal › Conference article › peer-review

Determination and sensitivity analysis of optimal control parameters of actively steered wheelsets

Lindbichler, L., Klanner, M., Melito, G. M. & Ellermann, K., Sept 2024, (E-pub ahead of print) Proceedings of ISMA 2024 International Conference on Noise and Vibration Engineering and USD2024 International Conference on Uncertainty in Structural Dynamics. KU Leuven

Research output: Chapter in Book/Report/Conference proceeding › Conference paper

Numerical method for transient analysis of beams with non-linear boundary conditions using a Trefftz-based approach

Thaller, T., Klanner, M. & Ellermann, K., 4 Nov 2024, Proceedings of ISMA 2024 International Conference on Noise and Vibration Engineering and USD2024 International Conference on Uncertainty in Structural Dynamics. KU Leuven, p. 2320-2334 15 p. (Proceedings of ISMA International Conference on Noise and Vibration Engineering and International Conference on Uncertainty in Structural Dynamics).

Research output: Chapter in Book/Report/Conference proceeding › Conference paper

2023

Challenges in rotor dynamics: from identification of uncertain parameters to balancing techniques

Ellermann, K., Prem, M. S., Quinz, G. & Klanner, M., 3 Mar 2023, Proceedings of DINAME 2023.

Research output: Chapter in Book/Report/Conference proceeding › Conference paper

Field balancing of flexible rotors without trial runs using the Numerical Assembly Technique

Quinz, G., Überwimmer, G., Klanner, M. & Ellermann, K., 23 Feb 2023, Proceedings of the SIRM2023: 15th European Conference on Rotordynamics.

Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review

Modal Balancing of Warped Rotors without Trial Runs Using the Numerical Assembly Technique

Quinz, G., Überwimmer, G., Klanner, M. & Ellermann, K., 7 Dec 2023, In: Machines. 11, 12, 1073.

Research output: Contribution to journal › Article › peer-review

Open Access

Numerical investigation of rotor-bearing systems with fractional derivative material damping model

Überwimmer, G., Quinz, G., Klanner, M. & Ellermann, K., 23 Feb 2023, Proceedings of SIRM2023: 15th European Conference on Rotordynamics.

Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review

Numerical investigation of rotor-bearing systems with fractional derivative material damping models

Überwimmer, G., Quinz, G., Klanner, M. & Ellermann, K., 2023, In: Bulletin of the Polish Academy of Sciences: Technical Sciences. 71, 6, 9 p., e148610.

Research output: Contribution to journal › Article › peer-review

Open Access

2022

Balancing of Flexible Rotors Supported on Fluid Film Bearings by Means of Influence Coefficients Calculated by the Numerical Assembly Technique

Quinz, G., Klanner, M. & Ellermann, K., 1 Mar 2022, In: Energies. 15, 6, p. 1-18 18 p., 2009.

Research output: Contribution to journal › Article › peer-review

Open Access

File

Balancing of rotor-bearing systems without trial runs using the Numerical Assembly Technique - An experimental investigation

Quinz, G., Klanner, M. & Ellermann, K., 12 Sept 2022, Proceedings of ISMA 2022 International Conference on Noise and Vibration Engineering and USD2022 International Conference on Uncertainty in Structural Dynamics. p. 1542-1553 13 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference paper

Transient vibrations of viscoelastic beam systems under arbitrary loading conditions and with fractional derivative damping models

Klanner, M. & Ellermann, K., 12 Sept 2022, Proceedings of ISMA 2022 International Conference on Noise and Vibration Engineering and USD2022 International Conference on Uncertainty in Structural Dynamics. p. 876-890 15 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference paper

2021

Balancing of a linear elastic rotor-bearing system with arbitrarily distributed unbalance using the Numerical Assembly Technique

Quinz, G., Prem, M. S., Klanner, M. & Ellermann, K., 1 Apr 2021, Proceedings of SIRM 2021: The 14th International Conference on Dynamics of Rotating Machines. p. 82-91 10 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review

Balancing of a linear elastic rotor-bearing system with arbitrarily distributed unbalance using the Numerical Assembly Technique

Quinz, G., Prem, M. S., Klanner, M. & Ellermann, K., Dec 2021, In: Bulletin of the Polish Academy of Sciences: Technical Sciences. 69, 6, 7 p., e138237.

Research output: Contribution to journal › Article › peer-review

Open Access

Forced harmonic vibrations of multi-span Euler-Bernoulli beams carrying spring-damper-mass systems

Klanner, M. & Ellermann, K., 25 Jan 2021, In: Proceedings in Applied Mathematics and Mechanics . 2021, 20, p. 1-2 2 p.

Research output: Contribution to journal › Conference article

Open Access

Identification of Fractional Damping Parameters in Structural Dynamics Using Polynomial Chaos Expansion

Prem, M. S., Klanner, M. & Ellermann, K., 30 Nov 2021, In: Applied Mechanics. 2, 4, p. 956-975 20 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Investigation of steady-state harmonic axial and torsional vibrations of linear rotors under arbitrarily distributed loading using the Numerical Assembly Technique

Blümel, B., Klanner, M. & Ellermann, K., 1 Apr 2021, Proceedings of SIRM 2021: The 14th International Conference on Dynamics of Rotating Machines. p. 205 - 214 10 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review

Model parameter estimation of ball bearings using generalized Polynomial Chaos Expansion

Prem, M. S., Klanner, M. & Ellermann, K., 1 Apr 2021, Proceedings of SIRM 2021: The 14th International Conference on Dynamics of Rotating Machines. p. 331 - 340 10 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review

Quasi-analytical solutions for the whirling motion of multi-stepped rotors with arbitrarily distributed mass unbalance running in anisotropic linear bearings

Klanner, M., Prem, M. S. & Ellermann, K., 1 Apr 2021, Proceedings of SIRM 2021: The 14th International Conference on Dynamics of Rotating Machines. p. 14 - 23 10 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review

Quasi-analytical solutions for the whirling motion of multi-stepped rotors with arbitrarily distributed mass unbalance running in anisotropic linear bearings

Klanner, M., Prem, M. S. & Ellermann, K., Dec 2021, In: Bulletin of the Polish Academy of Sciences: Technical Sciences. 69, 6, 9 p., e138999.

Research output: Contribution to journal › Article › peer-review

Open Access

Steady-State Harmonic Vibrations of Viscoelastic Timoshenko Beams with Fractional Derivative Damping Models

Klanner, M., Prem, M. S. & Ellermann, K., 11 Oct 2021, In: Applied Mechanics. 2, 4, p. 797-819 23 p.

Research output: Contribution to journal › Article › peer-review

Open Access

2020

Efficient parameter identification using generalized Polynomial Chaos Expansion – A numerical and experimental study

Prem, M. S., Klanner, M. & Ellermann, K., 30 Oct 2020, Proceedings of ISMA 2020 International Conference on Noise and Vibration Engineering and USD2020 International Conference on Uncertainty in Structural Dynamics. p. 1833 - 1846 14 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference paper

Steady-state harmonic vibrations of a linear rotor-bearing system with a discontinuous shaft and arbitrarily distributed mass unbalance

Klanner, M., Prem, M. S. & Ellermann, K., 30 Oct 2020, Proceedings of ISMA 2020 International Conference on Noise and Vibration Engineering and USD2020 International Conference on Uncertainty in Structural Dynamics. p. 1257 - 1272 16 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference paper

Open Access

Steady-state linear harmonic vibrations of multiple-stepped Euler-Bernoulli beams under arbitrarily distributed loads carrying any number of concentrated elements

Klanner, M. & Ellermann, K., 1 Jan 2020, In: Applied and Computational Mechanics. 14, 1, p. 31-50 20 p.

Research output: Contribution to journal › Article › peer-review

Open Access

2019

Vibration analysis of a rotor of an electrical rotating machine with stochastically distributed input parameters

Prem, M. S., Klanner, M. & Ellermann, K., 2019, Proceedings of 13th SIRM: The 13th International Conference on Dynamics of Rotating Machinery. Copenhagen: DTU Lyngby, Denmark, p. 502-511 10 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review

Open Access

2018

Open Access

2017

Solutions of vibration problems for thin infinite plates subjected to harmonic loads

Klanner, M. & Ellermann, K., 27 Jul 2017, In: Journal of Theoretical and Applied Mechanics . 55, 3, p. 949-961 13 p.

Research output: Contribution to journal › Article › peer-review

Open Access

2016

Wave Based Method for the Vibrations of Moderately Thick Plates including Corner Stress Singularities

Klanner, M. & Ellermann, K., 21 Sept 2016, Proceedings of ISMA 2016 International Conference on Noise and Vibration Engineering. p. 1975-1989 15 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference paper

File

2015

Application of the Wave Based Method to steady-state vibrations of thick plates

Klanner, M. & Ellermann, K., 2015, Proceedings of ICoEV 2015 International Conference on Engineering Vibration. University of Ljubljana, Faculty of Mechanical Engineering, p. 163-172

Research output: Chapter in Book/Report/Conference proceeding › Conference paper

Open Access

File

Wave Based Method for the steady-state vibrations of thick plates

Klanner, M. & Ellermann, K., 9 Jun 2015, In: Journal of Sound and Vibration. 345, p. 146-161 16 p.

Research output: Contribution to journal › Article › peer-review

2014

Coupling Node Reduction of a Synchronous Machine Using Multipoint-Constraints

Klanner, M., Mair, M., Diwoky, F., Biro, O. & Ellermann, K., 2014, 8th International Styrian Noise, Vibration \& Harshness Congress. SAE International, p. 1-9

Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review

2013

Erweiterung eines Modells zur Simulation der strukturdynamischen Anregung von elektrischen Maschinen

Klanner, M., 2013

Research output: Thesis › Diploma Thesis

Michael Klanner

Analysis of rotor-bearing systems utilising fractional derivative material damping models

Comparing the NVH Behaviour of an Innovative SteelWood Hybrid Battery Housing Design to an All Aluminium Design

Determination and sensitivity analysis of optimal control parameters of actively steered wheelsets

Numerical method for transient analysis of beams with non-linear boundary conditions using a Trefftz-based approach

Challenges in rotor dynamics: from identification of uncertain parameters to balancing techniques

Field balancing of flexible rotors without trial runs using the Numerical Assembly Technique

Modal Balancing of Warped Rotors without Trial Runs Using the Numerical Assembly Technique

Numerical investigation of rotor-bearing systems with fractional derivative material damping model

Numerical investigation of rotor-bearing systems with fractional derivative material damping models

Balancing of Flexible Rotors Supported on Fluid Film Bearings by Means of Influence Coefficients Calculated by the Numerical Assembly Technique

Balancing of rotor-bearing systems without trial runs using the Numerical Assembly Technique - An experimental investigation

Transient vibrations of viscoelastic beam systems under arbitrary loading conditions and with fractional derivative damping models

Balancing of a linear elastic rotor-bearing system with arbitrarily distributed unbalance using the Numerical Assembly Technique

Balancing of a linear elastic rotor-bearing system with arbitrarily distributed unbalance using the Numerical Assembly Technique

Forced harmonic vibrations of multi-span Euler-Bernoulli beams carrying spring-damper-mass systems

Identification of Fractional Damping Parameters in Structural Dynamics Using Polynomial Chaos Expansion

Investigation of steady-state harmonic axial and torsional vibrations of linear rotors under arbitrarily distributed loading using the Numerical Assembly Technique

Model parameter estimation of ball bearings using generalized Polynomial Chaos Expansion

Quasi-analytical solutions for the whirling motion of multi-stepped rotors with arbitrarily distributed mass unbalance running in anisotropic linear bearings

Quasi-analytical solutions for the whirling motion of multi-stepped rotors with arbitrarily distributed mass unbalance running in anisotropic linear bearings

Steady-State Harmonic Vibrations of Viscoelastic Timoshenko Beams with Fractional Derivative Damping Models

Efficient parameter identification using generalized Polynomial Chaos Expansion – A numerical and experimental study

Steady-state harmonic vibrations of a linear rotor-bearing system with a discontinuous shaft and arbitrarily distributed mass unbalance

Steady-state linear harmonic vibrations of multiple-stepped Euler-Bernoulli beams under arbitrarily distributed loads carrying any number of concentrated elements

Vibration analysis of a rotor of an electrical rotating machine with stochastically distributed input parameters

Improvement of the Wave Based Method for Thick Plate Vibrations

On the influence of cyclic variability on surface noise contribution analysis of internal combustion engines

Wave Based Method for Structural Vibrations of Thick Plates

Solutions of vibration problems for thin infinite plates subjected to harmonic loads

Wave Based Method for the Vibrations of Moderately Thick Plates including Corner Stress Singularities

Application of the Wave Based Method to steady-state vibrations of thick plates

Wave Based Method for the steady-state vibrations of thick plates

Coupling Node Reduction of a Synchronous Machine Using Multipoint-Constraints

Erweiterung eines Modells zur Simulation der strukturdynamischen Anregung von elektrischen Maschinen

Michael Klanner

Research output

Search results