Additive manufacturing of a 4th-order K-band semi-planar slow-wave filter

Arash Arsanjani; Luke Robins; Benjamin Meier; Jelena Petrusa; Reinhard Teschl; Wolfgang Bösch

doi:10.1109/imfw49589.2021.9642380

Additive manufacturing of a 4th-order K-band semi-planar slow-wave filter

Arash Arsanjani^*, Luke Robins, Benjamin Meier, Jelena Petrusa, Reinhard Teschl, Wolfgang Bösch

^*Corresponding author for this work

Institute of Microwave and Photonic Engineering (4510)

Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review

Abstract

This paper presents the exploitation of the additive manufacturing (AM) technique laser powder bed fusion (L-PBF), for the fabrication of a K-band meta-substrate filter. The decisions made through each round of prototyping are discussed. It also presents the crucial parameters that can lead to a higher quality end product of AM. The filter response and out-of-band performance are also discussed in short.

Original language	English
Title of host publication	2021 IEEE MTT-S International Microwave Filter Workshop, IMFW 2021
Publisher	IEEE
Pages	332-334
Number of pages	3
ISBN (Electronic)	9781728168043
DOIs	https://doi.org/10.1109/imfw49589.2021.9642380
Publication status	Published - 17 Nov 2021

Keywords

Additive manufacturing
Filter
Laser powder bed fusion
Miniaturization
Selective laser melting
Slow-wave

ASJC Scopus subject areas

Health Informatics
Biomedical Engineering

Access to Document

10.1109/imfw49589.2021.9642380

Arash_Arsanjani_IMFW_2021Accepted author manuscript, 4.85 MBLicence: CC BY 4.0

Cite this

@inproceedings{4f08eca8074c4a0a89d64b914a33e21e,

title = "Additive manufacturing of a 4th-order K-band semi-planar slow-wave filter",

abstract = "This paper presents the exploitation of the additive manufacturing (AM) technique laser powder bed fusion (L-PBF), for the fabrication of a K-band meta-substrate filter. The decisions made through each round of prototyping are discussed. It also presents the crucial parameters that can lead to a higher quality end product of AM. The filter response and out-of-band performance are also discussed in short.",

keywords = "Additive manufacturing, Filter, Laser powder bed fusion, Miniaturization, Selective laser melting, Slow-wave",

author = "Arash Arsanjani and Luke Robins and Benjamin Meier and Jelena Petrusa and Reinhard Teschl and Wolfgang B{\"o}sch",

year = "2021",

month = nov,

day = "17",

doi = "10.1109/imfw49589.2021.9642380",

language = "English",

pages = "332--334",

booktitle = "2021 IEEE MTT-S International Microwave Filter Workshop, IMFW 2021",

publisher = "IEEE",

address = "United States",

}

TY - GEN

T1 - Additive manufacturing of a 4th-order K-band semi-planar slow-wave filter

AU - Arsanjani, Arash

AU - Robins, Luke

AU - Meier, Benjamin

AU - Petrusa, Jelena

AU - Teschl, Reinhard

AU - Bösch, Wolfgang

PY - 2021/11/17

Y1 - 2021/11/17

N2 - This paper presents the exploitation of the additive manufacturing (AM) technique laser powder bed fusion (L-PBF), for the fabrication of a K-band meta-substrate filter. The decisions made through each round of prototyping are discussed. It also presents the crucial parameters that can lead to a higher quality end product of AM. The filter response and out-of-band performance are also discussed in short.

AB - This paper presents the exploitation of the additive manufacturing (AM) technique laser powder bed fusion (L-PBF), for the fabrication of a K-band meta-substrate filter. The decisions made through each round of prototyping are discussed. It also presents the crucial parameters that can lead to a higher quality end product of AM. The filter response and out-of-band performance are also discussed in short.

KW - Additive manufacturing

KW - Filter

KW - Laser powder bed fusion

KW - Miniaturization

KW - Selective laser melting

KW - Slow-wave

UR - http://www.scopus.com/inward/record.url?scp=85124145644&partnerID=8YFLogxK

U2 - 10.1109/imfw49589.2021.9642380

DO - 10.1109/imfw49589.2021.9642380

M3 - Conference paper

SP - 332

EP - 334

BT - 2021 IEEE MTT-S International Microwave Filter Workshop, IMFW 2021

PB - IEEE

ER -

Additive manufacturing of a 4th-order K-band semi-planar slow-wave filter

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

The Pixelated Metasurface: A Novel Component Design Approach

Cite this