Aktivitäten pro Jahr
Abstract
Electric high voltage (HV) cables are commonly used in electrified vehicles. These cables are well known for being potential flanking transmission paths for structure-borne sound in a broad frequency range and must therefore be included in the NVH design process. Although many different layouts exist automotive HV cables fundamentally exhibit a layered structure consisting of a conductive core covered by, in sequence, an isolating sheath, a wire mesh shield to minimize electromagnetic interference and an outer jacket. The conductive core consists of hundreds of thin copper or aluminum wires organized in strands which are wound in a helical pattern. An extensive measurement campaign was carried out to dynamically characterize different cable specimen in terms of multi-degree of freedom transfer impedances. It was shown that although the cable exhibits a direction-dependent Young’s modulus and loss factor suitable results could be obtained by modelling the conductive core using an isotropic multi-layer continuum model. The model was experimentally validated for a test case featuring strong dynamic coupling and showed encouraging results until 2 kHz.
Originalsprache | englisch |
---|---|
Seitenumfang | 9 |
Fachzeitschrift | SAE Technical Papers |
Ausgabenummer | 2022-01-0952 |
DOIs | |
Publikationsstatus | Veröffentlicht - 15 Juni 2022 |
Veranstaltung | 12th International Styrian Noise, Vibration & Harshness Congress: The European Automotive Noise Conference - Graz, Graz, Österreich Dauer: 22 Juni 2022 → 24 Juni 2022 |
Fingerprint
Untersuchen Sie die Forschungsthemen von „Experimental Characterization and Dynamic Modelling of Electrical Cables“. Zusammen bilden sie einen einzigartigen Fingerprint.Aktivitäten
- 1 Vortrag bei Konferenz oder Fachtagung
-
Experimental characterization and dynamic modelling of electrical cables
Jan Rejlek (Redner/in)
23 Juni 2022Aktivität: Vortrag oder Präsentation › Vortrag bei Konferenz oder Fachtagung › Science to science