Search concepts
|
Selected filters
|
- 750 - 800 out of 90,489 results
Search results
-
3D Printed Porous Nanocellulose-Based Scaffolds As Carriers for Immobilization of Glycosyltransferases
Lackner, F., Liu, H., Štiglic, A. D., Bračič, M., Kargl, R., Nidetzky, B., Mohan, T. & Kleinschek, K. S., 19 Dec 2022, In: ACS Applied Bio Materials. 5, 12, p. 5728-5740 13 p.Research output: Contribution to journal › Article › peer-review
Open Access -
3D Printed Reactors for Synthesis of Active Pharmaceutical Ingredients in Continuous Flow
Maier, M. C., Valotta, A., Hiebler, K., Soritz, S., Gavric, K., Grabner, B. & Gruber-Wölfler, H., 16 Oct 2020, In: Organic Process Research & Devlopment. 24, 10, p. 2197-2207 11 p.Research output: Contribution to journal › Article › peer-review
-
3D Printing at Point of Care: From Strategy to Operation - Insights from a real-world case
Url, P., Vössner, S. & Vorraber, W., 18 Jul 2023.Research output: Contribution to conference › Abstract › peer-review
-
3D printing in the planning and teaching of endovascular procedures
Stana, J., Grab, M., Kargl, R. & Tsilimparis, N., 2022, In: Die Radiologie. p. 28 33 p., 62.Research output: Contribution to journal › Article › peer-review
-
3D Printing of Dual-Cure Networks Based on (Meth)acrylate/Bispropargyl Ether Building Blocks
Sommer, K., Rieger, P., Müller, S. M., Schwarz, R., Trimmel, G., Feuchter, M. & Griesser, T., 2023, In: Advanced Engineering Materials. 25, 7, 2200901.Research output: Contribution to journal › Article › peer-review
Open Access -
3D-Printing of High-κ Thiol-Ene Resins with Spiro-Orthoesters as Anti-Shrinkage Additive
Marx, P., Romano, A., Roppolo, I., Chemelli, A., Mühlbacher, I., Kern, W., Chaudhary, S., Andritsch, T., Sangermano, M. & Wiesbrock, F., 1 Dec 2019, In: Macromolecular Materials and Engineering. 304, 12, 10 p., 1900515.Research output: Contribution to journal › Article › peer-review
-
3D printing of oral drugs: a new reality or hype?
Hsiao, W. K., Lorber, B., Reitsamer, H. & Khinast, J., 2 Jan 2018, In: Expert Opinion on Drug Delivery. 15, 1, p. 1-4 4 p.Research output: Contribution to journal › Editorial › peer-review
-
3D printing of supercooled liquids: Modeling and verification on sodium acetate trihydrate
Brillinger, M., 25 Aug 2023, In: Additive Manufacturing. 76, 103766.Research output: Contribution to journal › Article › peer-review
Open Access -
3D Progressive Education Environment for S-BPM
Weichhart, G., Pirker, J., Gütl, C. & Stary, C., 2014, S-BPM ONE - Application Studies and Work in Progress. Springer, Vol. 422. p. 188-197 (Communications in Computer and Information Science).Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review
-
3D quantitative structural analysis of second harmonic generation images of cartilage
Romijn, E. I., Lilledahl, M. B., Pierce, D., Holzapfel, G. & de Lange Davies, C., 9 Jul 2012.Research output: Contribution to conference › (Old data) Lecture or Presentation
-
3D Radial bUTE
Diwoky, C. & Stollberger, R., 2011, International Society for Magnetic Resonance in Medicine: Scientific Meeting & Exhibition. ., p. 387-387Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review
-
3D Reconstruction and 3D Imaging Techniques
Matsko, N., Efimov, A. E., Gnaegi, H., Grogger, W. & Hofer, F., 3 Sept 2011.Research output: Contribution to conference › (Old data) Lecture or Presentation
-
3D Reconstruction and Geographical Referencing of Lightning Discharges
Heber, M., 2008Research output: Thesis › Master's Thesis
-
3D reconstruction and in situ characterization of microfiltration membranes in an environmental scanning electron microscope
Pölt, P., Reingruber, H., Zankel, A. & Mayrhofer, C., 2012, Procedia Engineering 44. ., p. 1510-1513Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review
-
3D reconstruction and in situ characterization of microfiltration membranes in an environmental scanning electron microscope
Pölt, P., Reingruber, H., Zankel, A. & Mayrhofer, C., 2012.Research output: Contribution to conference › Poster
Open AccessFile -
3D Reconstruction from Line Drawings
Wendt, L., Stork, A., Kuijper, A. & Fellner, W-D., 2010, VISIGRAPP 2010. Proceedings; International Conference on Computer Graphics Theory and Applications (GRAPP). ., p. 65-71Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review
-
3D reconstruction model of malpasset dam using close-range photogrammetry technique for geotechnical application
Lee, H., Jun 2021, In: The Journal of Engineering Geology. 31, 2, p. 179-186 8 p.Research output: Contribution to journal › Article › peer-review
Open Access -
3 D Reconstruction of Complex Morphological Tissue Components of Atherosclerotic Human Arteries based on High Resolution Magnetic Resonance Imaging.
Auer, M., Stollberger, R., Regitnig, P., Ebner, F. & Holzapfel, G. A., 2006, In: IEEE Transactions on Medical Imaging. 25, 3, p. 345-357Research output: Contribution to journal › Article › peer-review
-
3D-reconstruction of cracks in polymer blends
Nachtnebel, M., Mayrhofer, C. & Pölt, P., 23 Aug 2015.Research output: Contribution to conference › (Old data) Lecture or Presentation
-
3D-RECONSTRUCTION OF CRACKS IN POLYMER BLENDS
Nachtnebel, M., Mayrhofer, C. & Pölt, P., 2015, Multinational Congress on Microscopy. ., p. O-216-34-35Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review
-
3D-Reconstruction of cracks in polymers – New insight in the fracture behaviour?
Nachtnebel, M., Zankel, A., Mayrhofer, C., Gahleitner, M. & Pölt, P., 2017, Deformation and Fracture Behaviour of Polymer Materials. 1 ed. Springer International Publishing AG , (Springer Series in Materials Science; vol. 247).Research output: Chapter in Book/Report/Conference proceeding › Chapter
-
3D-reconstruction of cracks in polymers - New insight into the fracture behaviour?
Nachtnebel, M., Zankel, A., Mayrhofer, C., Gahleitner, M. & Pölt, P., 2014, Internationale Wissenschaftliche Tagung Polymerwerkstoffe. ., p. 216-220Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review
-
3D–reconstruction of cracks in polymers – New insight into the fracture behaviour?
Nachtnebel, M., Zankel, A., Mayrhofer, C., Gahleitner, M. & Pölt, P., 25 Jun 2014.Research output: Contribution to conference › (Old data) Lecture or Presentation
-
3D reconstruction of organic and inorganic materials using in situ ultramicrotomy
Reingruber, H., Zankel, A., Schröttner, H. & Pölt, P., 2011, Microscopy Conference. ., p. IM3.P140-IM3.P140Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review
-
3D reconstruction of organic and inorganic materials using in situ ultramicrotomy
Reingruber, H., Zankel, A., Schröttner, H. & Pölt, P., 2011.Research output: Contribution to conference › Poster
-
3D-reconstructions of a neuronal Motion Detecting Sensor with Serial block Face Scanning Electron Microscopy (SBEM)
Hobusch, U., Wernitznig, S., Gütl, D., Zankel, A., Pölt, P., Rind, F. C. & Leitinger, G., 2015, ASEM Workshop Advanced Electron Microscopy. ., p. 26-26Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review
-
3D Recording and Surveillance of Aging Asphaltic Concrete Linings
Neuschitzer, F., Klima, K. & Gaich, A., 17 Oct 2005.Research output: Contribution to conference › (Old data) Lecture or Presentation
-
3D Rock Structure Digital Characterization Using Airborne LiDAR and Unmanned Aerial Vehicle Techniques for Stability Analysis of a Blocky Rock Mass Slope
Xu, Q., Ye, Z., Liu, Q., Dong, X., Li, W., Fang, S. & Guo, C., 1 Jul 2022, In: Remote Sensing. 14, 13, 3044.Research output: Contribution to journal › Article › peer-review
Open Access -
3D Roof Details by 3D Aerial Vision
Leberl, F., Meixner, P. & Brédif, M., 2011, 2011 IEEE International Conference on Computer Vision Workshops. Piscataway, NY: Institute of Electrical and Electronics Engineers, p. 212-218Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review
-
3D Scene Flow Estimation with a Piecewise Rigid Scene Model
Vogel, C., Schindler, K. & Roth, S., 2015, In: International Journal of Computer Vision.Research output: Contribution to journal › Article › peer-review
Open AccessFile -
3D Scene Flow Estimation with a Rigid Motion Prior
Vogel, C., Roth, S. & Schindler, K., 2011, International Conference on Computer Vision. Barcelona: Institute of Electrical and Electronics EngineersResearch output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review
File -
3D Segmentation by Maximally Stable Volumes (MSVs)
Donoser, M. & Bischof, H., 2006, Proceedings of 18th International Conference on Pattern Recognition. ., p. 63-66 (Volume I).Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review
-
3D Simulation and Process Optimization of Laser Assisted Milling of Ti6Al4V
Zamani, H. A., Hermani, J-P., sonderegger, B. & Sommitsch, C., 2013, In: Procedia CIRP. 8, p. 75-80Research output: Contribution to journal › Conference article › peer-review
Open AccessFile -
3D Simulation and Process Optimization of Laser Assisted Milling of Ti6Al4V
Zamani, H. A., Hermani, J-P., Sonderegger, B. & Sommitsch, C., 13 Jun 2013.Research output: Contribution to conference › (Old data) Lecture or Presentation
Open AccessFile -
3D simulation of hydrogen ignition in a rapid compression machine
Frolov, S. M., Emans, M., Ivanov, V. S., Basara, B., Leshevich, V. V. & Penyazkov, O. G., 2013, In: Journal of Loss Prevention in the Process Industries. 26, 6, p. 1558-1568Research output: Contribution to journal › Article › peer-review
-
3D Simulation of Laser Assisted Side Milling of Ti6Al4V Alloy using Modified Johnson-Cook Material Model
Zamani, H. A., Hermani, J-P., Sonderegger, B. & Sommitsch, C., 22 Apr 2013.Research output: Contribution to conference › (Old data) Lecture or Presentation
Open AccessFile -
3D Simulation of Laser Assisted Side Milling of Ti6Al4V Alloy using Modified Johnson-Cook Material Model
Zamani, H. A., Hermani, J-P., Sonderegger, B. & Sommitsch, C., 2013, In: Key Engineering Materials. 554-557, p. 2054-2061Research output: Contribution to journal › Article › peer-review
-
3D Spatially Controlled Chemical Functionalization on Alumina Membranes
Falcaro, P., Trinchi, A., Doherty, C. M., Buso, D., Costacurta, S., Hill, A. J., Patelli, A., Scopece, P., Marmiroli, B., Amenitsch, H., Lasio, B., Pinna, A., Innocenzi, P. & Malfatti, L., 2014, In: Science of Advanced Materials. 6, 7, p. 1520-1524Research output: Contribution to journal › Article › peer-review
-
3DSpectra: A 3-Dimensional Quantification Algorithm For LC-MS Labeled Profile
Nasso, S., Hartler, J., Trajanoski, Z., Di Camillo, B., Mechtler, K. & Toffolo, G., 2015, In: Journal of Proteomics. 112, p. 156-165Research output: Contribution to journal › Article › peer-review
-
3DSpectra: A 3D Quantification Software for LC-MS Labeled Profile Data
Nasso, S., Hartler, J., Di Camillo, B. & Toffolo, G., 2010.Research output: Contribution to conference › Poster
-
3DSpectra: A 3D Quantification Software for LC-MS Labeled Profile Data
Nasso, S., Hartler, J., Di Camillo, B. & Toffolo, G., 9 Jun 2010.Research output: Contribution to conference › (Old data) Lecture or Presentation
-
3DSpectra: A 3D Quantification Software For LC-MS Labeled Profile Data
Nasso, S., Hartler, J., Di Camillo, B. & Toffolo, G., 2010.Research output: Contribution to conference › Poster
-
3DSpectra: A Matlab software for easy handling and 3D quantification of LC-MS labeled profile data
Nasso, S., Hartler, J., Di Camillo, B. & Toffolo, G., 2009.Research output: Contribution to conference › Poster
-
3D stereo mapping by means of UltracamD data
Schardt, M., Ofner, M., Raggam, J. & Hirschmugl, M., 2006, Proceedings of ISPRS Workshop on 3D Remote Sensing in Forestry. ., p. 0-0Research output: Chapter in Book/Report/Conference proceeding › Conference paper
-
3D structural and chemical characterisation of paper using advanced electron microscopical techniques
Wagner, J., Zankel, A., Reingruber, H. & Schröttner, H., 8 Jun 2011.Research output: Contribution to conference › (Old data) Lecture or Presentation
-
3D-Structure of dipeptidylpeptidase III (DPPIII)
Gruber, K., Arruda, G. B., Baral, P. K., Deller, S., Macheroux, P., Jajcanin-Jozic, N. & Abramic, M., 19 Jul 2009.Research output: Contribution to conference › (Old data) Lecture or Presentation
-
3D-structuring of optical waveguides with two photon polymerization
Inführ, R. M., Stampfl, J., Krivec, S., Liska, R., Lichtenegger, H., Satzinger, V., Schmidt, V., Matsko, N. & Grogger, W., 2009, Proc. Vol. 1179. ., p. 1-2Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review
-
3D Surface Acquisition and Reconstruction for Inspection of Raw Steel Products
Pernkopf, F., 2005, (Submitted) In: Computers in Industry.Research output: Contribution to journal › Article › peer-review
-
3D Surface Analysis using Coupled HMMs
Pernkopf, F., 2005, (Submitted) In: Machine Vision and Applications.Research output: Contribution to journal › Article › peer-review
-
3D Surface Inspection using Couples HMMs
Pernkopf, F., 2004, International Conference on Pattern Recognition. ., p. 223-226Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review