M. C. Poletti

Publikationen

Publikationen pro Jahr 2004 2012 2013 2014 2015 2016 2021 2025

• 91 Artikel
• 44 (Altdaten) Vortrag oder Präsentation
• 30 Beitrag in einem Konferenzband
• 18 Poster
• 21 Mehr
  • 7 Konferenzartikel
  • 3 Editorial
  • 2 Beitrag in Buch/Bericht
  • 2 Abstract
  • 2 Diskussion
  • 1 Paper
  • 1 Short communication
  • 1 Sonstiger Beitrag
  • 1 Dissertation
  • 1 Habilitation

Publikationen pro Jahr

Publikationen pro Jahr

Suchergebnisse

• 2025

  Effects of recovery and phase transformation on the recrystallization kinetics of Ti-6Al-4V during β-processing

  Miller Branco Ferraz, F., Buzolin, R. H., Warchomicka, F. G., Terrazas Monje, T., Ebenbauer, S., Leitner, T., Krumphals, A. & Poletti, M. C., Feb. 2025, in: Materials Science and Engineering A . 922, 147628.

  Publikation: Beitrag in einer Fachzeitschrift › Artikel › Begutachtung

  Open Access
• 2024

  A comprehensive mean-field approach to simulate the microstructure during the hot forming of Ti-17

  Miller Branco Ferraz, F., Buzolin, R. H., Maßwohl, M., Shahryari, E., Krumphals, A. & Poletti, M. C., Juni 2024, in: Materials Science and Engineering A . 903, 20 S., 146645.

  Publikation: Beitrag in einer Fachzeitschrift › Artikel › Begutachtung

  Open Access

  • Hot Working 100%
  • Mechanical Response 100%
  • Field Model 100%
  • Final Microstructure 100%
  • Strain Rate 100%

• Al- and Ta-Modified Alloy 740 Superalloy Castings Produced in Non-vacuum Conditions—Microstructure and Selected Properties

  Grudzień-Rakoczy, M., Rakoczy, Ł., Lech, S., Dudziak, T., Rząd, E., Goły, M., Paćko, M., Chrzan, K., Cygan, R. & Poletti, C., Okt. 2024, in: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 55, 10, S. 3839-3858 20 S.

  Publikation: Beitrag in einer Fachzeitschrift › Artikel › Begutachtung

  Open Access

  • Superalloys 100%
  • Ultimate Tensile Strength 50%
  • Oxidation Reaction 50%
  • Heat Treatment 25%
  • Tantalum 25%

• A predictive mesoscale model for continuous dynamic recrystallization

  Miller Branco Ferraz, F., Buzolin, R. H., Ebenbauer, S., Leitner, T., Krumphals, A. & Poletti, M. C., Aug. 2024, in: International Journal of Plasticity. 179, 104022.

  Publikation: Beitrag in einer Fachzeitschrift › Artikel › Begutachtung

  Open Access

  • Dynamic Recrystallization 100%
  • Continuous Dynamic 100%
  • Mesoscale 100%
  • Strain Rate 100%
  • Large Deformation 100%

• Dynamic recrystallisation in Inconel®718 at creep conditions

  Pradeep, K., Buzolin, R. H., Domankova, M., Godor, F., Stanojevic, A. & Poletti, M. C., Feb. 2024, in: Materials Science and Engineering: A. 893, 146146.

  Publikation: Beitrag in einer Fachzeitschrift › Artikel › Begutachtung

  Open Access

  Datei

  • Creep 100%
  • Creep Resistance 100%
  • Density 60%
  • Nickel-Based Superalloys 40%
  • Intermetallic Compound 40%

• Heterogeneous dynamic restoration of Ti–15Mo alloy during hot compression

  Shahryari, E., Poletti, M. C., Preisler, D., Harcuba, P., Stráský, J., Janeček, M. & Warchomicka, F. G., 9 Nov. 2024, in: Journal of Materials Research and Technology. 33, S. 7656-7667 12 S.

  Publikation: Beitrag in einer Fachzeitschrift › Artikel › Begutachtung

  Open Access

  • Strain Rate 100%
  • Work Hardening 40%
  • Electron Backscatter Diffraction 40%
  • Restoration Process 25%
  • Alloying 20%

• Influence of the heat treatment path on the precipitation sequence in an AlSi7Cu0.5Mg-alloy

  Wang, R., Gonzalez, C., Stauder, B., Fernández Gutiérrez, R., Albu, M., Sommadossi, S., Povoden-Karadeniz, E. & Poletti, M. C., 30 Juni 2024, in: Journal of Alloys and Compounds. 990, 174450.

  Publikation: Beitrag in einer Fachzeitschrift › Artikel › Begutachtung

  Open Access

  • Heat Treatment 100%
  • Solidification 40%
  • Quenching 25%
  • Artificial Ageing 25%
  • Cylinder Heads 25%

• Representation of the microstructure of pearlitic steels for DEM simulations of fatigue

  Davoodi Jooneghani, H., Six, K., Sharifi, S. S., Poletti, M. C. & Trummer, G., 15 März 2024, in: Wear. 540-541, 205228.

  Publikation: Beitrag in einer Fachzeitschrift › Artikel › Begutachtung

  Open Access

  • Anisotropy 100%
  • Discrete Element Method 100%
  • Scanning Electron Microscopy 100%
  • Electron Backscatter Diffraction 100%
  • Plastic Deformation 100%

• The effect of thermomechanical welding on the microstructure and mechanical properties of S700MC steel welds

  Wang, P., Martins Gomes, F., Warchomicka, F. G., Ernst, W., Vallant, R., Poletti, M. C. & Enzinger, N., Mai 2024, in: Welding in the World. 68, 5, S. 1053-1069 17 S., 10.1007/s40194-024-01711-x.

  Publikation: Beitrag in einer Fachzeitschrift › Artikel › Begutachtung

  Open Access

  • Plastic Deformation 100%
  • Mechanical Vibration 100%
  • Grain Size 66%
  • Grain Refinement 66%
  • Bainite 66%

• The electron beam freeform fabrication of NiTi shape memory alloys. Part II: Influence of the heat treatment on the superelastic behaviour

  Guimarães, R. P. M., Rauchdobler, B., Pixner, F., Mahdi, A., Ferraz, F. M. B., Poletti, C., Enzinger, N. & Amancio-Filho, S. T., Jan. 2024, in: Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 238, 1, S. 100-111 12 S.

  Publikation: Beitrag in einer Fachzeitschrift › Artikel › Begutachtung

  • Heat Treatment 100%
  • Shape Memory Alloy 100%
  • Multilayer 100%
  • Shape Memory Effect 100%
  • Deposited Material 50%

• The Influence of Thermomechanical Conditions on the Hot Ductility of Continuously Cast Microalloyed Steels

  Sharifi, S. S., Bakhtiari, S., Shahryari, E., Sommitsch, C. & Poletti, M. C., 16 Sept. 2024, in: Materials. 17, 18, 4551.

  Publikation: Beitrag in einer Fachzeitschrift › Artikel › Begutachtung

  Open Access

  • Dynamic Recrystallization 100%
  • Microalloyed Steel 100%
  • Austenite 100%
  • Continuous Casting 100%
  • Strain Rate 100%
• 2023

  Hot deformation mechanisms of dual phase high entropy alloys

  Buzolin, R. H., Masswohl, M., Branco Ferraz, F. M., Chrzan, K., Dudziak, T. & Poletti, M. C., 30 Juni 2023, in: Materials Science and Engineering: A. 878, 15 S., 145235.

  Publikation: Beitrag in einer Fachzeitschrift › Artikel › Begutachtung

  Open Access

  Datei

  • Deformation Mechanism 100%
  • High Entropy Alloys 100%
  • Grain Boundary 66%
  • Strain Rate 66%
  • Phase Interface 33%

• Influence of thermomechanical treatments on the microstructure and mechanical properties of AISI 304L welds

  Wang, P., Szalowski, B., Vallant, R., Poletti, M. C. & Enzinger, N., 2023, in: Welding International. 37, 2, S. 79-90 12 S.

  Publikation: Beitrag in einer Fachzeitschrift › Artikel › Begutachtung

  Open Access

  • Welding 100%
  • Grain Size 50%
  • Plastic Deformation 50%
  • Martensite 50%
  • Mechanical Vibration 50%

• Investigation of microstructural evolution during hot deformation of micro-alloyed steels

  Bakhtiari, S., Sharifi, S. S., Ilie, S., Poletti, M. C. & Sommitsch, C., Juli 2023.

  Publikation: Konferenzbeitrag › Poster

• Metamodelling the hot deformation behaviour of titanium alloys using a mean-field approach

  Ferraz, F. M. B., Sztangret, Ł., Carazo, F., Buzolin, R. H., Wang, P., Szeliga, D., dos Santos Effertz, P., Macioł, P., Krumphals, A. & Poletti, M. C., Juni 2023, in: Materials Today Communications. 35, 106148.

  Publikation: Beitrag in einer Fachzeitschrift › Artikel › Begutachtung

  Open Access

  • Strain Rate 100%
  • Hot Working 100%
  • Deformation Behavior 100%
  • Titanium Alloy 100%
  • Finite Element Simulation 50%

• Microstructure refinement of a cast high entropy alloy by thermomechanical treatments

  Buzolin, R. H., Masswohl, M., Branco Ferraz, F. M., Chrzan, K., Dudziak, T. & Poletti, M. C., 8 Mai 2023, in: Materials Science and Engineering A. 872, 144931.

  Publikation: Beitrag in einer Fachzeitschrift › Artikel › Begutachtung

  Open Access

  Datei

  • Strain Rate 100%
  • High Entropy Alloys 100%
  • High-Entropy Alloys 100%
  • Grain Size 50%

• Modeling the hot deformation behavior of micro-alloyed steel in the single and two-phase fields

  Sharifi, S. S., Buzolin, R. H., Bakhtiari, S., Melo Gontijo, M., Sommitsch, C. & Poletti, M. C., 4 Sept. 2023, (Elektronische Veröffentlichung vor Drucklegung.) in: Journal of Physics: Conference Series. 2635, 11 S., 012029.

  Publikation: Beitrag in einer Fachzeitschrift › Konferenzartikel › Begutachtung

  Open Access

  • Microalloyed Steel 100%
  • Nucleation 33%
  • Strain Rate 33%
  • Density 33%
  • Yield Stress 33%

• Phase transformation kinetics in a coarse-grain Ti17 alloy determined by laser ultrasonics and dilatometry

  Buzolin, R. H., Rodrigues, M. C. M., Militzer, M., Krumphals, A., Guntsche, E., Sommadossi, S. & Poletti, M. C., Dez. 2023, in: Materials Today Communications. 37, 107364.

  Publikation: Beitrag in einer Fachzeitschrift › Artikel › Begutachtung

  • Dilatometry 100%
  • Metallurgy 100%
  • Lever Rule 28%
  • Heat Treatment 25%
  • Scanning Electron Microscopy 25%

• The influence of heat treatment and cold deformation on pearlitic steel characteristics

  Sharifi, S. S., Davoodi Jooneghani, H., Six, K., Trummer, G. & Poletti, M. C., 4 Juli 2023.

  Publikation: Konferenzbeitrag › Poster › Begutachtung

  • Proeutectoid Ferrite 100%
  • Hypoeutectoid Steel 100%

• Thermomechanical treatments for a dual phase cast high entropy alloy

  Buzolin, R. H., Masswohl, M., Ferraz, F. M. B., Chrzan, K., Dudziak, T. & Poletti, M. C., 15 Sept. 2023, in: Journal of Alloys and Compounds. 956, 170310.

  Publikation: Beitrag in einer Fachzeitschrift › Artikel › Begutachtung

  Open Access

  Datei

  • Strain Rate 100%
  • High Entropy Alloys 100%
  • Grain Boundary 50%
  • Yield Stress 50%
  • Annealing 50%
• 2022

  An advanced dislocation density-based approach to model the tensile flow behaviour of a 64.7Ni–31.96Cu alloy

  Joseph, A. S., Gupta, P., Kumar, N., Poletti, M. C. & Yadav, S. D., 2022, in: Philosophical Magazine. 102, 15, S. 1481-1504 24 S.

  Publikation: Beitrag in einer Fachzeitschrift › Artikel › Begutachtung

  • Tensiles 100%
  • Flow Behavior 100%
  • Dislocation Density 100%
  • Density 100%
  • Flow Stress 75%

• Analysis and Modeling of Stress–Strain Curves in Microalloyed Steels Based on a Dislocation Density Evolution Model

  Sobotka, E., Kreyca, J., Poletti, M. C. & Povoden-Karadeniz, E., Okt. 2022, in: Materials. 15, 19, 6824.

  Publikation: Beitrag in einer Fachzeitschrift › Artikel › Begutachtung

  Open Access

  • Density 100%
  • Microalloyed Steel 100%
  • Strain Rate 50%
  • Weldability 25%
  • Yield Stress 25%

• High entropy alloys produced by laser powder bed fusion assisted by in-situ alloying

  Arneitz, S., Sharifi, S. S., Palcevski, T., Auer, P., Domitner, J., Poletti, M. C., Amancio-Filho, S. T., Sommitsch, C. & Buzolin, R. H., 22 Apr. 2022.

  Publikation: Konferenzbeitrag › Poster

• Modelling the hot deformation of a microalloyed steel

  Sharifi, S. S., Buzolin, R. H., Melo Gontijo, M., Meixner, F., Hoflehner, C., Poletti, M. C. & Sommitsch, C., 22 Apr. 2022.

  Publikation: Konferenzbeitrag › Poster

  Datei

  • Hot Working 100%
  • Microalloyed Steel 100%
  • Strain Hardening 66%
  • Damage Behavior 66%
  • Work Hardening 66%

• REPRESENTATION OF MICROSTRUCTURE FOR FATIGUE CRACK GROWTH IN DEM SIMULATIONS

  Davoodi Jooneghani, H., Six, K., Sharifi, S. S., Poletti, M. C. & Trummer, G., 4 Sept. 2022.

  Publikation: Konferenzbeitrag › Paper › Begutachtung

  • Short Crack 100%

• Stress Relaxation during Artificial Aging of an AlSi₇Cu_0.5Mg Cast Alloy

  Wang, R., Ram, D., Stauder, B., Gutiérrez, R. F., Gariboldi, E. & Poletti, M. C., 19 Aug. 2022, in: Crystals. 12, 8, 16 S., 1168.

  Publikation: Beitrag in einer Fachzeitschrift › Artikel › Begutachtung

  Open Access

  Datei

  • Heat Treatment 100%
  • Cast Alloy 100%
  • Stress Relaxation 100%
  • High Tensile Stress 25%
  • Ultimate Tensile Strength 20%

• Topological aspects in the microstructural evolution of AA6082 during hot plastic deformation

  Buzolin, R. H., Krumphals, F. & Poletti, M. C., 19 Okt. 2022, (Elektronische Veröffentlichung vor Drucklegung.) in: European Journal of Materials.

  Publikation: Beitrag in einer Fachzeitschrift › Artikel › Begutachtung

  Open Access

  • Dynamic Recrystallization 100%
  • Continuous Dynamic 100%
  • Microstructural Evolution 100%
  • Plastic Deformation 100%
  • Rolling Direction 100%
• 2021

  A dislocation-based model for the microstructure evolution and the flow stress of a Ti5553 alloy

  Buzolin, R. H., Lasnik, M., Krumphals, A. & Poletti, M. C., Jan. 2021, in: International Journal of Plasticity. 136, 102862.

  Publikation: Beitrag in einer Fachzeitschrift › Artikel › Begutachtung

  • Strain Rate 100%
  • Density 100%
  • Grain Size 50%
  • Titanium Alloy 50%
  • Plastic Deformation 50%

• Comparative thermal fatigue behavior of AlSi7Mg alloy produced by L-PBF and sand casting

  Sajedi, Z., Casati, R., Poletti, M. C., Wang, R., Iranshahi, F. & Vedani, M., Nov. 2021, in: International Journal of Fatigue. 152, 106424.

  Publikation: Beitrag in einer Fachzeitschrift › Artikel › Begutachtung

  • Fatigue Behavior 100%
  • Powder Bed Fusion 100%
  • Thermal Fatigue 100%
  • Tensile Loads 66%
  • Mechanical Property 33%

• Corrigendum: “Hot deformation and dynamic α-globularization of a Ti-17 alloy: Consistent physical model” (Materials & Design (2021) 197, (S0264127520308017), (10.1016/j.matdes.2020.109266))

  Buzolin, R. H., Lasnik, M., Krumphals, A. & Poletti, M. C., 2021, in: Materials and Design. 203, 109627.

  Publikation: Beitrag in einer Fachzeitschrift › Diskussion › Begutachtung

  Open Access

  • Electron Backscatter Diffraction 100%
  • Materials Design 100%
  • Hot Working 100%

• Effects of Cr on NiAl (β′) Precipitation in Ferritic Fe-Ni-Al Alloys

  Ferreira-Palma, C., Poletti, M. C., Pineda-Huitron, R. M., López-Hirata, V. M., Rivas-López, D. I. & Dorantes-Rosales, H. J., Sept. 2021, in: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 52, 9, S. 3777-3787 11 S.

  Publikation: Beitrag in einer Fachzeitschrift › Artikel › Begutachtung

  • Coarsening 100%
  • Corrosion Resistance 100%
  • X-Ray Diffraction 50%
  • Solid Solution 50%
  • Curie Temperature 50%

• High-Resolution Microstructure Characterization of Additively Manufactured X5CrNiCuNb17-4 Maraging Steel during Ex and In Situ Thermal Treatment

  Albu, M., Panzirsch, B., Schröttner, H., Mitsche, S., Reichmann, K., Poletti, M. C. & Kothleitner, G., 1 Dez. 2021, in: Materials. 14, 24, 16 S., 7784.

  Publikation: Beitrag in einer Fachzeitschrift › Artikel › Begutachtung

  Open Access

  • Maraging Steel 100%

• Hot deformation and dynamic α-globularization of a Ti-17 alloy: Consistent physical model

  Buzolin, R. H., Lasnik, M., Krumphals, A. & Poletti, M. C., 1 Jan. 2021, in: Materials and Design. 197, 109266.

  Publikation: Beitrag in einer Fachzeitschrift › Artikel › Begutachtung

  Open Access

  • Dynamic Recrystallization 100%
  • High Strain Rate 100%
  • Deformation Mechanism 100%
  • Continuous Dynamic 100%
  • Compression Test 100%

• Hot deformation behavior of a ni‐based superalloy with suppressed precipitation

  Lizzi, F., Pradeep, K., Stanojevic, A., Sommadossi, S. & Poletti, M. C., Apr. 2021, in: Metals. 11, 4, 605.

  Publikation: Beitrag in einer Fachzeitschrift › Artikel › Begutachtung

  Open Access

  • Stress Softening 100%

• Initiation of dynamic recrystallization of as-cast N08028 alloy

  Mora, E., Navarro, A., Silveira, E., Poletti, C., Mendiguren, J. & Hurtado, I., 2021, ESAFORM 2021 - 24th International Conference on Material Forming. PoPuPS (University of LiFge Library), 896. (ESAFORM 2021 - 24th International Conference on Material Forming).

  Publikation: Beitrag in Buch/Bericht/Konferenzband › Beitrag in einem Konferenzband › Begutachtung

  Open Access

  • Austenitic Stainless Steel 100%
  • Dynamic Recrystallization 100%
  • Strain Rate 100%
  • Flow Curve 100%
  • Critical Strain 100%

• Microstructure Evolution and Phase Identification in Ni-Based Superalloy Bonded by Transient Liquid Phase Bonding

  Poliserpi, M., Buzolin, R., Boeri, R., Poletti, C. & Sommadossi, S., Juni 2021, in: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 52, 3, S. 1695-1707 13 S.

  Publikation: Beitrag in einer Fachzeitschrift › Artikel › Begutachtung

  • Crystal Structure 100%
  • Nickel-Based Superalloys 100%
  • Electron Backscatter Diffraction 100%
  • Grain Boundary 50%
  • Nucleation 50%

• Preface

  Ionescu, M., Sommitsch, C., Poletti, C., Kozeschink, E. & Chandra, T., 1 Jan. 2021, in: Materials Science Forum. 1016 MSF, S. v

  Publikation: Beitrag in einer Fachzeitschrift › Editorial

• Refinement of the Ti-17 microstructure after hot deformation: Coupled mesoscale model

  Buzolin, R. H., Canelo Yubero, D., Warchomicka, F. G., Lasnik, M., Krumphals, A. & Poletti, M. C., 7 Jan. 2021, in: Materials Science and Engineering A . 800, 19 S., 140268.

  Publikation: Beitrag in einer Fachzeitschrift › Artikel › Begutachtung

  • Nucleation 100%
  • Grain Boundary 66%
  • Heat Treatment 33%
  • Strain Rate 33%
  • Annealing 33%

• TEM and Synchrotron X-ray Study of the Evolution of Phases Formed During Bonding of IN718/Al/IN718 Couples by TLPB

  Poliserpi, M., Barriobero-Vila, P., Requena, G., García, L. N., Tolley, A., Poletti, C., Vojtek, T., Weiser, A., Schell, N., Stark, A., Boeri, R. & Sommadossi, S., 4 Apr. 2021, in: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 52, 4, S. 1382-1394 13 S.

  Publikation: Beitrag in einer Fachzeitschrift › Artikel › Begutachtung

  • Phase Composition 100%
  • Crystal Structure 50%
  • Intermetallics 50%
  • Energy-Dispersive X-Ray Spectroscopy 50%
  • Lattice Constant 50%

• Temperature and microstructural condition dependence for thermal diffusivity and thermal condutivity of a casting Al-Si-Cu-Mg alloy

  Gariboldi, E., Confalonieri, C., Wang, R., Poletti, M. C., Stauder, B. & Fernandez Gutierrez, R., 1 Nov. 2021, La Metallurgia Italiana, 113, 11-12, S. 67-72 6 S.

  Publikation: Beitrag in Zeitung/Magazin › Artikel › Begutachtung

  • Temperature Dependence 100%
  • Heating Rate 100%
  • Comparative Analysis 100%
  • Thermal Diffusivity 100%
  • Casting Alloy 100%

• The behaviours of alloys under thermo-mechanical treatment

  Poletti, M. C., Mai 2021, in: Metals. 11, 5, 677.

  Publikation: Beitrag in einer Fachzeitschrift › Editorial › Begutachtung

  Open Access

• Thermec'2021: Conference Proceedings Book - International Conference on Processing & Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications: Selected, peer-reviewed papers from the International Conference on Processing and Manufacturing of Advanced Materials Processing

  Ionescu, M. (Herausgeber), Sommitsch, C. (Herausgeber), Poletti, M. C. (Herausgeber), Kozeschnik, E. & Chandra, T., 2021, Conference proceedings book: International Conference on Processing and Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications. Switzerland: Trans Tech Publications Ltd.

  Publikation: Beitrag in Buch/Bericht/Konferenzband › Beitrag in Buch/Bericht › Begutachtung
• 2020

  Analysis of Splitting and Martensitic Transformation of AlNi Intermetallic Obtained by Transient Liquid Phase Bonding

  Poliserpi, M., Buzolin, R., Boeri, R., Poletti, C. & Sommadossi, S., 1 Juni 2020, in: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 51, 3, S. 916–924 9 S.

  Publikation: Beitrag in einer Fachzeitschrift › Artikel › Begutachtung

  • Intermetallics 100%
  • Crystal Structure 66%
  • Electron Backscatter Diffraction 66%
  • Crystal Orientation 66%
  • Grain Boundary 33%

• Characterization and modelling the flow localization in titanium alloys during hot forming

  Miller Branco Ferraz, F., Poletti, M. C., Wang, P. & Buzolin, R. H., 31 Mai 2020.

  Publikation: Konferenzbeitrag › Poster

  • Grain Boundary 100%
  • Titanium Alloy 100%
  • Density 66%
  • Finite Element Modeling 66%
  • Grain Size 66%

• Flow modelling of Ti6Al4V under large strains

  Hogrefe, K., Buzolin, R. H. & Poletti, M. C., 12 Okt. 2020, MATEC Web of Conferences . Band 321. 6 S. 12028

  Publikation: Beitrag in Buch/Bericht/Konferenzband › Beitrag in Buch/Bericht › Begutachtung

  Open Access

  • Flow Stress 100%
  • Grain Boundary 100%
  • Dynamic Recrystallization 66%
  • Strain Rate 66%
  • Continuous Dynamic 66%

• Improved Predictability of Microstructure Evolution during Hot Deformation of Titanium Alloys

  Buzolin, R. H., Miller Branco Ferraz, F., Lasnik, M., Krumphals, A. & Poletti, M. C., 12 Dez. 2020, in: Materials. 13, 24, S. 1-30 30 S., 5678.

  Publikation: Beitrag in einer Fachzeitschrift › Artikel › Begutachtung

  Open Access

  • Density 100%
  • Titanium Alloy 100%
  • Grain Boundary 50%
  • Strain Rate 25%
  • Elastic Strain 25%

• In-situ characterization of continuous dynamic recrystallization during hot torsion of an Al–Si–Mg alloy

  Canelo-Yubero, D., Kovács, Z., Simonet Fotso, J. F. T., Tolnai, D., Schell, N., Groma, I. & Poletti, C., 5 Mai 2020, in: Journal of Alloys and Compounds. 822, 153282.

  Publikation: Beitrag in einer Fachzeitschrift › Short communication › Begutachtung

  • Dynamic Recrystallization 100%
  • Continuous Dynamic 100%
  • Density 100%
  • Dynamic Recovery 50%
  • Dislocation Density 50%

• Modelling the Competitive Growth of Primary, Allotriomorphic, and Secondary Alpha in Ti-6Al-4V

  Buzolin, R. H., Weiß, D., Krumphals, A., Lasnik, M. & Poletti, M. C., 1 Aug. 2020, in: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 51, 8, S. 3967-3980 14 S.

  Publikation: Beitrag in einer Fachzeitschrift › Artikel › Begutachtung

  Open Access

  • Competitive Growth 100%
  • Platelet 50%
  • Circularity 20%
  • Nucleation Rate 20%

• Phase transformation sequence of Ti-6Al-4V as a function of the cooling rate

  Buzolin, R. H., Weiß, D., Krumphals, A., Lasnik, M. & Poletti, M. C., 12 Okt. 2020, MATEC Web of Conferences. Band 321. 9 S. 12038

  Publikation: Beitrag in Buch/Bericht/Konferenzband › Beitrag in einem Konferenzband › Begutachtung

  Open Access

  • Cooling Rate 100%
  • Ti-6al-4v 100%
  • Nucleation 100%
  • Platelet 100%
  • Good Agreement 20%

• Thermal fatigue testing of laser powder bed fusion (L-PBF) processed AlSi7Mg alloy in presence of a quasi-static tensile load

  Sajedi, Z., Casati, R., Poletti, M. C., Skalon, M. & Vedani, M., 3 Juli 2020, in: Materials Science and Engineering A . 789, 139617.

  Publikation: Beitrag in einer Fachzeitschrift › Artikel › Begutachtung

  Open Access

  • Thermal Fatigue 100%
  • Fatigue Testing 100%
  • Laser Powder Bed Fusion 100%
  • Laser Additive Manufacturing 33%
  • Exhaust Manifolds 33%