Projects per year
- 1 - 50 out of 175 results
Search results
-
Research area
-
-
-
Load side converter of a parallel resonance link frequency changer
1/01/95 → 31/01/96
Project: Research area
-
Volume forces in Roebel bars inside slots, forces at the boundary of the slot - A closer view on electromagnetic origin and mechanical consequences
Grabner, C.
1/01/01 → 31/01/01
Project: Research area
-
Models for calculating the power dissipation in the switching components of pulse-controlled inverters
1/01/93 → 31/01/95
Project: Research area
-
-
-
-
-
Nonideal behaviour of PWM voltage-source-inverters
Weichbold, P.
1/01/98 → 28/02/01
Project: Research area
-
Stray Load Losses in Polyphase Rotating Machines - A Comparison of Direct Analytical and Fem Assisted Calculation
1/10/99 → …
Project: Research area
-
Estimation of the Electric and Mechanic Parameters of Induction Machines
Dannerer, G.
1/10/00 → …
Project: Research area
-
-
-
-
Construction and Simulation of line side converters of parallel resonance link frequency changers
1/01/94 → 31/01/95
Project: Research area
-
Optimization of the electrical traction system for a electric vehicle
Ingruber, R.
1/09/01 → 30/04/02
Project: Research area
-
-
-
Thermal Resistance Identification of N-Body Systems by Solving Over-Determined Differential Equations
Köfler, H. & Traußnigg, U.
1/05/99 → 31/01/04
Project: Research area
-
Numerical computation of iron losses in a permanent assisted synchronous machine taking account of the kind of magnetisation due to higher harmonics.
Grabner, C.
1/06/02 → 31/10/03
Project: Research area
-
-
Inverter-fed asynchronous machines for high-temperature positioning applications
1/02/13 → 31/01/16
Project: Research area
-
On the use of a hybrid technique with regard to a specific electromechanical problem in electrical machines
Grabner, C.
1/01/02 → 31/10/02
Project: Research area
-
The mechanical consequences of radial and tangential volume forces in loose Roebel bars of large synchronous machines
Grabner, C.
1/08/01 → 30/09/01
Project: Research area
-
-
Comparison of MCT and IGBT in Soft and Hard Switching Applications
1/01/96 → 31/01/98
Project: Research area
-
-
-
Performance of asymmetrically fed three phase induction machines
Fresacher, G.
1/01/98 → 31/10/99
Project: Research area
-
Reactance Calculation of a 500 MVA Hydro-Generator using a Finite Element Analysis with Superelements
Grabner, C.
1/03/01 → 31/03/01
Project: Research area
-
Deformation of composites caused by electromagnetic forces
Grabner, C.
1/06/01 → 31/08/01
Project: Research area
-
Numerical computation of electromagnetic force densities at solid material boundaries regarding magnetic saturation
Grabner, C.
1/01/02 → 30/09/02
Project: Research area
-
Strategies for the design, construction and uilding of cooling cycles of electrical drive systems.
Grabner, C.
1/01/02 → 1/12/03
Project: Research area
-
Analytical and numerical computation of natural resonance frequencies of different stator arrangements taking account of the electrical insulation as well as the material the coils are built up.
Grabner, C.
1/01/03 → 30/09/03
Project: Research area
-
Research project
Loss comparison between welded and snapfastened stator core stacks
1/06/96 → 31/03/97
Project: Research project
-
Temperature rise of a single-phase induction motor - experiment and simulation
1/01/98 → 31/12/98
Project: Research project
-
Optimization of an induction motor
Grabner, C. & Köfler, H.
1/08/00 → 30/09/00
Project: Research project
-
-
Iron losses due to alternating magnetomotive force evoked by inverter supply
Fresacher, G.
1/09/96 → 30/09/97
Project: Research project
-
Transient phenomena and transition states of doubly fed sychronous machines
Rechberger, K.
1/01/96 → 31/12/98
Project: Research project
-
-
-
-
-
Rules for the calculation of mechanical stress in the overhang of coils of electrical rotating machines
1/01/96 → 30/09/99
Project: Research project
-
-
-
Switched-mode power supply battery charger for use in an electric vehicle
1/01/94 → 31/01/95
Project: Research project