Projects per year
- 100 - 150 out of 234 results
Search results
-
fAusT - Development of an efficient simulation-based design process for thermomechanical treatment of titanium aluminides for low-pressure turbine blades
Halici, D. & Poletti, M. C.
1/01/12 → 31/12/14
Project: Research project
-
-
Gewindetubensimulation II - "Smart Process" - Simulation of tapping plates
9/06/14 → 18/01/15
Project: Research project
-
Walzprofilieren - Improvement of competnece in rollforming
1/03/13 → 28/02/15
Project: Research project
-
AMAG MCL - Modelling of microstructure evolution during cold rolling and contiuous solution annealing of alumniumalloys
1/04/12 → 31/03/15
Project: Research project
-
KW50+ - Enhance power stations efficiency to more than 50 percent, Microstructure improvement of boron containing 9 % Cr martensitic steel
Beal, C., Plesiutschnig, E., Sonderegger, B., Schuler, M., Ramskogler, C. & Enzinger, N.
1/04/11 → 31/03/15
Project: Research project
-
-
AURA - Development of pool roofings on the basis of walk-on-water-technology
1/05/14 → 31/05/15
Project: Research project
-
K1-MET 3.3 Therm. model. - K1-MET: 3.3 Thermomechanical modelling - Thermomechanical Modelling of Continuous Causting and hot rolling
Sommitsch, C., Djuric, D. & Caliskanoglu, O.
1/01/12 → 30/06/15
Project: Research project
-
EU - MACPLUS - Component Performance-driven Solutions for Long-Term Efficiency Increase in Ultra Supercritical Power Plants
Mayr, P., Vujic, S., Schlacher, C. & Sommitsch, C.
1/01/11 → 30/06/15
Project: Research project
-
-
Wisco_Multitool - forming tool for a hat profile
Boskovic, V.
31/03/15 → 31/08/15
Project: Research project
-
Mitsubishi Heavy Industries - Development of precipitation simulation method for FGHAZ in mod.9Cr-1Mo steels
1/07/14 → 30/09/15
Project: Research project
-
Neue Werks. i.d. Umformtechn. - Modellentwicklung und Evaluierung neuer Werkstoffe in der Umformtechnik
1/05/12 → 31/10/15
Project: Research project
-
OscAR - Austrian supply chain for aluminum fuselage components
Sommitsch, C., Tändl, J. & Poletti, M. C.
1/01/13 → 31/12/15
Project: Research project
-
-
Dissertation Steineder - Research on medium Mn steels in the framework of the PhD thesis of Mrs Katharina Steineder
Beal, C.
1/02/13 → 31/01/16
Project: Research project
-
EU-Z-ultra - Z phase strengthened steels for ultra-supercritical power plants [Original in Deutsch: Durch Z-Phase gehärtete Stähle für ultra-überkritische Kraftwerke]
Sonderegger, B., Sommitsch, C., Poletti, M. C. & Yadav, S. D.
1/02/13 → 31/01/16
Project: Research project
-
BioTiMod - Surface modification of titanium alloys to improve the biocompatibility of implants
Warchomicka, F. G. & Ramskogler, C.
1/03/14 → 29/02/16
Project: Research project
-
Dobeneck Stiftung - Additive manufacturing with electron beam welding
8/07/15 → 31/03/16
Project: Research project
-
EBW Voith - Electron Beam Welding of complex cross sections
1/07/13 → 30/06/16
Project: Research project
-
-
HotConSens - Development of a dual high temperature sensor for measurement of sound emission and elongation
Poletti, M. C., Sonderegger, B. & Ahmadi, M. R.
1/08/14 → 31/07/16
Project: Research project
-
-
-
UNAB - Sustainable Designprocess & Integrated Facades
Mach, T., Stavric, M., Wall, J., Passer, A., Brandl, D., Pichler, M., Zellinger, M., Klammer, G., Trink, T., Riewe, R., Hofstadler, C., Oswald, F., Adametz, C., Kreiner, H., Schober, H., Hochenauer, C., Englhardt, O., Wakonig-Lüking, T., Boskovic, V. & Scherz, M.
1/10/13 → 30/09/16
Project: Research project
-
SHT6xxx - Shock Heat Treatment Process (SHT) for heat treatable aluminium alloys 6xxx
Machhammer, M.
1/10/13 → 30/09/16
Project: Research project
-
Multifunktionale_Warmformwerkzeug - Multitool Hot Forming
1/05/16 → 31/12/16
Project: Research project
-
-
DOKA - New combinations of materials in light weight design in concrete form work
1/01/15 → 31/12/16
Project: Research project
-
-
MHI Creep Strength Estimation - Development of a creep strength estimation method based on microstructural simulation in mod.9Cr-1Mo steels
1/01/16 → 31/03/17
Project: Research project
-
Simple Heat - Efficient heat recovery from exhaust gas streams of biomass firing by optimised materials selection
1/04/15 → 31/03/17
Project: Research project
-
-
-
-
-
-
-
ESW - Eisenwerk Sulzau-Werfen - Special material for surface sensitive applications in hot rolling mills
1/03/15 → 1/03/18
Project: Research project
-
EU - DP700-Phase 1 - Preparation for Commercial Demonstration Plant for 700oC Operation
1/07/16 → 31/03/18
Project: Research project
-
-
JoinTec:SPRS - Smart Joining Technology & Testing: Self-piercing Riveting Simulation
1/06/17 → 31/05/18
Project: Research project
-
CTVAM - Crossweld Creep Testing of Grade 92 for thermal power plant applications
Schlacher, C.
5/05/08 → 30/06/18
Project: Research project
-
-
FWF-Torsion von Metallen - Thermomechanical processing of metals at moderate and large strains
Poletti, M. C., Halici, D., Canelo Yubero, D. & Simonet Fotso, J. F. T.
1/01/15 → 31/07/18
Project: Research project
-
Metal JOINing - K-Projekt Network of Excellence for Metal JOINing
Vallant, R., Stummer, M., Schneider, C., Enzinger, N., Stütz, M., Weingrill, L. A. & Rath, G.
1/09/14 → 31/08/18
Project: Research project
-
PHS - Investigation of the Formability of Press Hardening Steels
1/04/18 → 30/11/18
Project: Research project
-
CRESTA2 - New Creep Resistant Stable Steel for USC Power Plant
1/07/14 → 31/12/18
Project: Research project
-
HISCC UHSS - Improvement of hydrogen induced stress corrosion cracking resistance of ultra-high strength steel screws and fasteners
Sommitsch, C., Ahmed, H. A. E. & Vallant, R.
1/07/18 → 31/12/18
Project: Research project