Projects per year
- 50 - 100 out of 148 results
Search results
-
Finished
Calculation and construction of a linear drive for the textile industry
1/01/04 → 31/01/06
Project: Research project
-
Measurements of shaft currents at inverter fed Induction Machines
Ingruber, R., Rechberger, T. & Krischan, K.
1/12/03 → 31/12/09
Project: Research project
-
-
-
-
Analytical Calculation of the Line Side Behaviour of an Uncontrolled B12- Rectifier with Capactitive DC- Smoothing
Rechberger, T.
1/01/03 → 31/12/09
Project: Research project
-
Analytical and numerical computation of natural resonance frequencies of different stator arrangements taking account of the electrical insulation as well as the material the coils are built up.
Grabner, C.
1/01/03 → 30/09/03
Project: Research area
-
Study of motor concepts for cryogen compressors of small power
1/09/02 → 31/10/02
Project: Research project
-
Test Bench for Reliability Investigations on Industrial Powerconverters
Ingruber, R.
1/08/02 → 31/12/09
Project: Research project
-
Numerical computation of iron losses in a permanent assisted synchronous machine taking account of the kind of magnetisation due to higher harmonics.
Grabner, C.
1/06/02 → 31/10/03
Project: Research area
-
Simulation and Improvement of the Control for a Test Bench of Vehicle’s Powertrain
Seebacher, R., Ingruber, R., Dannerer, G., Krischan, K. & Rechberger, T.
1/05/02 → 31/01/05
Project: Research project
-
Numerical computation of electromagnetic force densities at solid material boundaries regarding magnetic saturation
Grabner, C.
1/01/02 → 30/09/02
Project: Research area
-
On the use of a hybrid technique with regard to a specific electromechanical problem in electrical machines
Grabner, C.
1/01/02 → 31/10/02
Project: Research area
-
Strategies for the design, construction and uilding of cooling cycles of electrical drive systems.
Grabner, C.
1/01/02 → 1/12/03
Project: Research area
-
Optimization of the electrical traction system for a electric vehicle
Ingruber, R.
1/09/01 → 30/04/02
Project: Research area
-
Modelling the Drive Train Oszillations of a Wind Generator
1/09/01 → 31/12/04
Project: Research project
-
Efficient Performance Improvement of Synchronous Reluctance Machines by Means of Internal Magnetic Rotor Flux Barriers for High-speed Drives
Grabner, C.
1/09/01 → 31/01/02
Project: Research project
-
The mechanical consequences of radial and tangential volume forces in loose Roebel bars of large synchronous machines
Grabner, C.
1/08/01 → 30/09/01
Project: Research area
-
Deformation of composites caused by electromagnetic forces
Grabner, C.
1/06/01 → 31/08/01
Project: Research area
-
Measurement Based Parameter Estimation for Claw Pole Generators
Dannerer, G. & Seebacher, R.
1/04/01 → 31/01/05
Project: Research project
-
Modelling of a Claw Pole Generator
Ofner, G., Seebacher, R. & Hofer, A.
1/03/01 → 31/01/05
Project: Research project
-
Reactance Calculation of a 500 MVA Hydro-Generator using a Finite Element Analysis with Superelements
Grabner, C.
1/03/01 → 31/03/01
Project: Research area
-
The Behaviour of Synchromous Generators in Case of Line Faults
1/02/01 → 31/07/01
Project: Research project
-
-
-
Volume forces in Roebel bars inside slots, forces at the boundary of the slot - A closer view on electromagnetic origin and mechanical consequences
Grabner, C.
1/01/01 → 31/01/01
Project: Research area
-
Measurement of differential pressure of cooling systems for powersemiconductors
Ingruber, R.
1/01/01 → 30/04/02
Project: Research project
-
Calibration of Temperature Sensors for Measurements on Converter Cooling Systems under Realistic Mounting Conditions
1/01/01 → 31/01/05
Project: Research project
-
-
Test rig for determination of thermal properties of cooling systems for powersemiconductors
Ingruber, R.
1/01/01 → 31/08/01
Project: Research project
-
The numerical calculation of saturation dependent reactances of concentrated and distributed windings in electrical machines
Grabner, C.
1/11/00 → 31/12/00
Project: Research project
-
Planning of an Acceptance Test for Big Permanent Magnet Synchronous Machine
1/11/00 → 31/12/10
Project: Research project
-
Thermal properties of a cooling apparatus
Krischan, K., Ingruber, R. & Seebacher, R.
1/10/00 → 31/08/01
Project: Research project
-
Optimization of an induction motor
Grabner, C. & Köfler, H.
1/08/00 → 30/09/00
Project: Research project
-
Research on the use of PWM-VSI as a shunt active filter
Ofner, G. & Weichbold, P.
1/07/00 → 31/10/01
Project: Research project
-
-
Numerical and analytical calculation of position dependent and saturated reactances of a switched reluctance motor
Grabner, C. & Köfler, H.
1/05/00 → 31/07/00
Project: Research project
-
-
Unbalanced load in variable speed generators in hydro power plants
1/01/00 → 31/01/00
Project: Research project
-
Single phase sudden short circuits in variable speed generators
1/01/00 → 31/01/00
Project: Research project
-
Power system harmonics caused by voltage-source-inverters
1/10/99 → 28/02/02
Project: Research project
-
The division of the magnetic flux reaction between the damper winding and solid poles of a synchronous machine
1/10/99 → 30/09/02
Project: Research project
-
No load, load and short circuit behaviour of a stray field transformer
1/09/99 → 31/10/99
Project: Research project
-
Heating of an induction motor at reversing duty
Traußnigg, U.
1/05/99 → 31/01/00
Project: Research project
-
Force and Torque in Single Phase Two Pole Induction Motors with Eccentric Rotor - An Attempt to Include Slot Effects Due to Eccentricity
1/05/99 → 31/12/10
Project: Research project
-
Thermal Resistance Identification of N-Body Systems by Solving Over-Determined Differential Equations
Köfler, H. & Traußnigg, U.
1/05/99 → 31/01/04
Project: Research area
-
Test for defects of an isolation layer of generator plates
Traußnigg, U.
1/03/99 → 30/09/99
Project: Research project
-
-
High voltage insulation for superconducting power equipment
Telser, E. J., Hubmann, M. & Gerhold, J.
1/01/99 → 31/12/99
Project: Research project
-