Projects per year
- 1 - 50 out of 2,222 results
Search results
-
-
ZEVS-2015 - Machinability of tempered steels with different metallurgic characteristics
1/07/15 → 30/11/15
Project: Research project
-
ZEVS- 14 - Machinability of hardened and tempered steels with low sulphur
1/09/14 → 31/01/15
Project: Research project
-
ZEDATU - Unfalldatenbank - Zentrale Datenbank tödlicher Verkehrsunfälle mit Auswertung der Vermeidbarkeitsmöglichkeiten
Steffan, H., Tomasch, E. & Mayrhofer, E.
1/07/04 → 31/03/06
Project: Research project
-
XT01_LEC - Comprehensive Survey and Modeling of Processes in the Prechamber and the Main Combustion Chamber of Gas Engines
1/01/19 → 31/12/22
Project: Research project
-
XRoll - Investigation of Roll Wear on a Cross-roll Straightening Machine
1/05/23 → 1/05/24
Project: Research project
-
-
X4T1 - X4T1 - LEC - Measurements for the Evaluation of Ignition Models in the Framework of the K1 LEC EvoLET Project X4T1
1/03/15 → 31/12/17
Project: Research project
-
X1T1 - X1T1 - LEC - Fundamental Experimental Investigations to Support the 3D Simulation of Dual Fuel Combustion
1/02/15 → 30/06/18
Project: Research project
-
WTZ-LightJoin - Characterizing Joints of Lightweight Materials for Automotive Applications
1/01/20 → 31/12/22
Project: Research project
-
WRGpot - Potential and concepts for waste water heat recovery in combination with solar collectors and heat pumps
Heinz, A. & Lerch, W.
1/01/10 → 31/12/11
Project: Research project
-
-
Working Area: Testing Technics
Grünbaum, P., Löffler, J., Hochleitner, H. & Faber, F.
1/01/95 → 31/07/15
Project: Research area
-
-
-
Working Area: Measurement within Mechanical Engineering
Grünbaum, P. & Joch, M.
1/01/99 → 31/07/15
Project: Research area
-
Working Area: Machine Elements
Löffler, J., Gross, T., Jud, W., Jürgens, G. & Moser, C.
1/01/95 → 31/07/15
Project: Research area
-
Working Area: Gearing Construction
Grünbaum, P., Jürgens, G., Paar, T., Joch, M., Löffler, J. & Gross, T.
1/01/95 → 31/07/15
Project: Research area
-
-
Working Area: Computer Aided Engineering - Mechanical Elements and Construction
Kronegger, B., Moser, C. & Jürgens, G.
1/01/95 → 31/07/15
Project: Research area
-
-
Wöhlerversuch Stumpfschweißnaht - Butt welded joint on an axle
Moser, C.
1/12/15 → 30/06/16
Project: Research project
-
Wkst_Labor - Laboratory use and support in the laboratory
1/01/24 → 31/12/26
Project: Research project
-
Wissenstransfer SW-Entwicklung - Knowledge Transfer Software Engineering
Schmaranz, K. & Grünwald, S.
1/10/05 → 31/01/06
Project: Research project
-
Wisco_Multitool - forming tool for a hat profile
Boskovic, V.
31/03/15 → 31/08/15
Project: Research project
-
-
-
Windenergie - WEC - Small wind energy converters
Meile, W., Kudelas, D. & Brenn, G.
1/01/08 → 30/06/10
Project: Research project
-
WIKAMOT - Turbulence Chamber Gasification with Combustion-Optimized Gas Engine and Turbulence Chamber Treatment
Pretterhofer, G. & Beran, R.
1/10/97 → 30/04/00
Project: Research project
-
Wiedererwärmungsofen - CFD simulation of a reheating furnace
Hochenauer, C. & Prieler, R. J.
1/01/19 → 31/05/19
Project: Research project
-
-
WHIPLASH I - Reduction of neck-injuries and their societal costs in rear and collisions
Steiner, K. & Steffan, H.
1/11/96 → 31/10/00
Project: Research project
-
WetCleanSIM - Computational modeling for wet cleaning inside semiconductor nanostructures
1/04/22 → 31/03/25
Project: Research project
-
Werkstoffwahl Entw. Verdichter - Materials selection in development of a new compressor
Ghanimi, Y. & Kukutschki, G.
1/03/04 → 1/03/07
Project: Research project
-
Werkstoffcharakterisierung 4a - Characterisation of different sandwich materials regarding their deep drawability
1/09/13 → 31/08/14
Project: Research project
-
Weldability of modern 9-12%Cr steels for low emission thermal power generation
Mayr, P.
1/02/04 → 31/01/09
Project: Research project
-
Weldability of Advanced 9-12% Cr Steels (COST 522, SPP)
Letofsky, E., Dimmler, G. & Cerjak, H.
1/11/98 → 31/12/03
Project: Research project
-
Weldability, Joining Behaviour and Usage Properties of Novel Developed Metallically and Organically Coated Thin Steel Sheet for the Automotive Industry (JOIN A.5)
Figner, G., Saberi, S., Vallant, R. & Ernst, W.
1/06/05 → 1/06/09
Project: Research project
-
We3D - Wire-based additive manufacturing – materials and technologies – for 3D metal structures of the future
1/03/21 → 28/02/25
Project: Research project
-
-
WaxPrinting - WaxPrinting
Trummer, A., Haas, F. & Pichlkastner, C.
1/07/15 → 30/09/17
Project: Research project
-
-
Wavelet Based Finite Element Methods
Maitz, A. & Hackl, K.
1/08/97 → 31/01/99
Project: Research project
-
Waste gas cleaning for road tunnels and underground car parks with carboxidotrophic mixed population
Pucher, K. & Robra, K.
1/02/92 → 31/07/97
Project: Research project
-
Wärmeüberg. b. hoher Prandtlz. - Wall heat transfer in high Prandtl number flow
1/03/14 → 28/02/17
Project: Research project
-
Wärmemotor: Wissenschaftl Projekt-Begleitung "Kraft aus Niedertemperaturwärme"
Zotter, G. & Rieberer, R.
1/01/10 → 31/01/12
Project: Research project
-
Warehouse-Design, Layout, Material and Information Flow in Production Systems
Oser, J., Kartnig, G. & Drobir, T.
1/01/95 → …
Project: Research area
-
-
Walzprofilieren - Improvement of competnece in rollforming
1/03/13 → 28/02/15
Project: Research project